Photopolymerized monolithic capillary columns for rapid micro high-performance liquid chromatographic separation of proteins

The preparation of monolithic poly(butyl methacrylate-co-ethylene dimethacrylate) capillary columns using photoinitiated in situ polymerization within 200 microm i.d. capillaries and their application for microHPLC separations of proteins have been studied. The low resistance to flow characteristic of monolithic columns, enabled the use of very high flow rates of up to 100 microL/min representing a flow velocity of 87 mm/s. Very good separations of a model protein mixture consisting of ribonuclease A, cytochrome c, myoglobin, and ovalbumin was achieved in less than 40 s using a very simple single step gradient of the mobile phase. Interestingly, no effect of the pore size on the separations of proteins was observed for these monolithic columns within the size range of 0.66-2.2 microm. The monolithic microHPLC columns are found very robust and no changes in the long term separation performance and back pressure were observed.     

The bridging bidentate perchlorato group in ReO3(ClO4), ReO3(ClO4Cl2O6 and Sb2Cl6(O)(OH)(ClO4), a vibrational analysis

Raman and infrared analysis of the new compounds: ReO3(ClO4), an ivory-white solid, and (ClO2)xReO3(ClO4)1+x (x < or = 1), an orange-red chloryl salt, showed that bridging bidentate [ClO4] and terminal ReO3 groups are present in both complexes. Vibrational data on [ClO4] in ReO3(ClO4) were compared to those obtained experimentally and by DFT calculation on a bridging bidentate [ClO4] in Sb2Cl6(O)(OH)(ClO4).     

Effects of structural factors on the pi-dimerization and/or disproportionation of the cation radical of extended TTF containing thiophene-based pi-conjugated spacers

The electrochemical and chemical oxidation of extended TTF 4 and 5 are analysed by cyclic voltammetry, Visible/NIR and ESR spectroscopies, and the X-ray structures of the new salts 5 x BF(4)(CH(2)Cl(2)) and 4 x ClO(4)(THF)(1/2) are presented. The effects of structural factors on the pi-dimerization or the disproportionation reaction of the cation radical are shown. The oxidation of compound 4 presents the successive formation of stable cation radical and dication species both in dichloromethane (DCM) and in a CH(3)CN/THF mixture. In contrast, for compound 5, the stability of the oxidation states strongly depends on the nature of the solvent. In DCM, the oxidation of 5 proceeds by two close one-electron transfers while in CH(3)CN/THF the dication is directly formed via a two-electron process. The X-ray structures of the two salts reveal the formation of pi-dimers of cation radical. While the dimer (5(2))(2+) is due mainly to pi-pi interactions between the conjugating spacer, the multiplication of the sulfur atoms in compound 4 contributes to stabilize the dimer by the combined effects of S-S and pi-pi interactions. Visible/NIR and ESR experiments confirm the higher tendency of 4(+)(.) to dimerize with the occurrence of dimer and monomer in solution, while for 5(+)(.) only the monomer is detected in DCM. On the other hand, by dissolution of 5 x BF(4)(CH(2)Cl(2)) in CH(3)CN, only the neutral and the dicationic states of compounds 5 are observed owing to the disproportionation reaction.     

A new, fast and efficient synthesis of 3-aryl indenones: intramolecular cyclization of 1,3-diarylpropynones in superacids

1,3-Diarylpropynones were cleanly converted to the corresponding 3-arylindenones in various superacidic media. This new, simple, one-pot reaction proved to be efficient (yields up to 95%) and very fast (reaction time less than 30 min).     

Monolithic columns with a gradient of functionalities prepared via photoinitiated grafting for separations using capillary electrochromatography

Stationary phases for capillary electrochromatography with a longitudinal gradient of functionalities have been prepared via photoinitiated grafting of polymer chains onto the pore surface of a porous polymer monolith. In order to achieve the desired retention and electroosmotic flow, the hydrophobic poly(butyl methacrylate-co-ethylene dimethacrylate) monolith with optimized porous properties was grafted with a layer of ionizable polymer, poly(2-acrylamido-2-methyl-1-propanesulfonic acid). A moving shutter and a neutral density filter were used to control the dose of UV light received at different locations along the monolith in order to create the longitudinal gradient of functionalities. Formation of the desired gradients was confirmed using electron probe microanalysis of different locations along the column. The preparation technique significantly affects performance in the CEC mode as demonstrated on the separations of a model mixture using columns both with homogeneous distribution of grafts and with a gradient of functionality. Columns grafted with the gradient of functionalities were found superior to those functionalized uniformly. A comparison of the performance of the gradient column with another containing evenly distributed functionalities showed the performance benefits of the "gradient" column.     

New green fluorescent polyvinylcarbazole copolymer with 1,8‐naphthalimide side chains as chemosensor for iron cations

The synthesis and basic photophysical characteristics of a novel green fluorescent polyvinylcarbazole polymer containing 4‐N,N‐dimethylaminoethyleneamino‐1,8‐naphthalimide side chains has been described. The ability to sense metal cations has been monitored by fluorescence emission spectroscopy. It is shown that the fluorescent intensity is very sensitive to the Fe²⁺ cations and the copolymer can be used as an homogeneous and heterogeneous fluorescent sensor for Fe²⁺ cations. Copyright © 2004 John Wiley & Sons, Ltd.     

Very general formation of tetrahydropterin cation radicals during reaction of iron porphyrins with tetrahydropterins: model for the corresponding NO-synthase reaction

Electron transfer from tetrahydropterins to iron porphyrins, with formation of intermediate tetrahydropterin cation radicals, is a very general reaction that was shown to occur not only with tetrahydrobiopterin, as originally found in NO-synthases, but also with another important biological cofactor, tetrahydrofolate, and various iron porphyrins, either in their ferric state, or in the Fe(II)O(2) state, as in the first model of the corresponding NO-synthase reaction described in this paper.     

Settling of paraffin crystals in cooled middle distillate fuels

The mechanism of action of additives that control the sedimentation of paraffin crystals after their crystallization in model diesel oil has been studied by means of a new experimental approach. The chemical analysis of the crystals and detailed measurements of the sedimentation phenomenon give new insights into this complex process. Thus, the wax antisettling additives used for preventing wax crystal sedimentation adsorb at the surfaces of wax particles and provide them with enhanced colloidal stability. The settling rate is not related to the size of the crystals or the viscosity of the liquid medium, but to the ability of the additives to prevent the aggregation of wax crystals. The reported methodology makes it possible to investigate the fundamental mechanisms, but also to evaluate structure-activity relationships of the various additives used in the petroleum industry.     

Aquachlorobis(4,4′,4′′‐tri‐tert‐butyl‐2,2′;6′,2′′‐terpyridine‐κ3N)terbium(III) diperchlorate ethanol disolvate

In the title compound, [TbCl(C₂₇H₃₅N₃)₂(H₂O)](ClO₄)₂·2C₂H₆O, the Tb^III ion has a coordination number of eight, composed of two tridentate substituted‐ter­pyridine ligands, a water mol­ecule and a bound Cl^? anion. The first coordination shell can be described as a distorted bicapped trigonal prism. The dihedral angles between pyridine rings belonging to the same tpy ligand range from 5.2 (5) to 16.8 (5)°.     

Synthesis of pyridone and pyridine rings by [4+2] hetero-cyclocondensation

Substituted pyridones and pyridines have been synthesised efficiently by employing iminium salt as a key precursor. These compounds were prepared using tandem [4+2] cycloaddition/deamination between azabutadiene and dienophiles.