Pressurized hot water extraction (PHWE)

Pressurized hot water extraction (PHWE) has become a popular green extraction method for different classes of compounds present in numerous kinds of matrices such as environmental, food and botanical samples. PHWE is also used in sample preparation to extract organic contaminants from foodstuff for food safety analysis and soils/sediments for environmental monitoring purposes. The main parameters which influence its extraction efficiency are namely the temperature, extraction time, flow rates and addition of modifiers/additives. Among these different parameters studied, temperature is described as the most important one. It is reported that the extraction of certain compounds is rather dependent on pressurized water with different applied temperature. Thus, the stability and reduced solubilities of certain compounds at elevated temperatures are highlighted in this review. With some modifications, a scaled-up PHWE could extract a higher amount of desirable compounds from solid and powdered samples such as plant and food materials. The PHWE extracts from plants are rich in chemical compounds or metabolites which can be a potential lead for drug discovery or development of disease-resistant food crops.     

Coexistence of Two Thermally Induced Intramolecular Electron Transfer Processes in a Series of Metal Complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)2] (M=Co,Fe, and Ni) bearing Non‐Innocent Catechol‐Based Ligands: A Combined Experimental and Theoretical Study

The different thermally induced intermolecular electron transfer (IET) processes that can take place in the series of complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)₂], for which M=Co ( 2 ), Fe ( 3 ) and Ni( 4 ), and Cat‐N‐BQ and Cat‐N‐SQ denote the mononegative (Cat‐N‐BQ^?) or dinegative (Cat‐N‐SQ^2?) radical forms of the tridentate Schiff‐base ligand 3,5‐di‐tert‐butyl‐1,2‐quinone‐1‐(2‐hydroxy‐3,5‐di‐tert‐butylphenyl)imine, have been studied by variable‐temperature UV/Vis and NMR spectroscopies. Depending on the metal ion, rather different behaviors are observed. Complex 2 has been found to be one of the few examples so far reported to exhibit the coexistence of two thermally induced electron transfer processes, ligand‐to‐metal (IET^LM) and ligand‐to‐ligand (IET^LL). IET^LL was only found to take place in complex 3 , and no IET was observed for complex 4 . Such experimental studies have been combined with ab initio wavefunction‐based CASSCF/CASPT2 calculations. Such a strategy allows one to solicit selectively the speculated orbitals and to access the ground states and excited‐spin states, as well as charge‐transfer states giving additional information on the different IET processes.     

Thermal‐ and Light‐Induced Spin Crossover in a Guest‐Dependent Dinuclear Iron(II) System

We previously reported the dinuclear material [Fe^II₂(ddpp)₂(NCS)₄] ? 4 CH₂Cl₂ ( 1? 4 CH₂Cl₂; ddpp=2,5‐di(2′,2′′‐dipyridylamino)pyridine) and its partially desolvated analogue ( 1? CH₂Cl₂), which undergo two‐ and one‐step spin‐crossover (SCO) transitions, respectively. Here, we manipulate the type and degree of solvation in this system and find that either a one‐ or two‐step spin transition can be specifically targeted. The chloroform clathrate 1? 4 CHCl₃ undergoes a relatively abrupt one‐step SCO, in which the two equivalent Fe^II sites within the dinuclear molecule crossover simultaneously. Partial desolvation of 1? 4 CHCl₃ to form 1? 3 CHCl₃ and 1? CHCl₃ occurs through single‐crystal‐to‐single‐crystal processes (monoclinic C2/c to P2₁/n to P2₁/n) in which the two equivalent Fe^II sites become inequivalent sites within the dinuclear molecule of each phase. Both 1? 3 CHCl₃ and 1? CHCl₃ undergo one‐step spin transitions, with the former having a significantly higher SCO temperature than 1? 4 CHCl₃ and the latter, and each has a broader SCO transition than 1? 4 CHCl₃, attributable to the overlap of two SCO steps in each case. Further magnetic manipulation can be carried out on these materials through reversibly resolvating the partially desolvated material with chloroform to produce the original one‐step SCO, or with dichloromethane to produce a two‐step SCO reminiscent of that seen for 1? 4 CH₂Cl₂. Furthermore, we investigate the light‐induced excited spin state trapping (LIESST) effect on 1? 4 CH₂Cl₂ and 1? CH₂Cl₂ and observe partial LIESST activity for the former and no activity for the latter.     

Complexes of Click‐Derived Bistriazolylpyridines: Remarkable Electronic Influence of Remote Substituents on Thermodynamic Stability as well as Electronic and Magnetic Properties

2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine (btp) ligands with substitution patterns ranging from strongly electron‐donating to strongly electron‐accepting groups, readily prepared by means of Cu‐catalyzed 1,3‐dipolar cycloaddition (the “click” reaction), were investigated with regard to their complexation behavior, and the properties of the resulting transition‐metal compounds were compared. Metal–btp complexes of 1:1 stoichiometry, that is, [Ru(btp)Cl₂(dmso)] and [Zn(btp)Br₂], could be isolated and were crystallographically characterized: they display octahedral and trigonal‐bipyramidal coordination geometries, respectively, and exhibit high aggregation tendencies due to efficient π–π stacking leading to low solubilities. Metal–btp complexes of 1:2 stoichiometry, that is, [Fe(btp)₂]²⁺ and [Ru(btp)₂]²⁺, could also be synthesized and their metal centers show the expected octahedral coordination spheres. The iron compounds exhibit quite a complex magnetic behavior in the solid state including spin crossover near room temperature, and hysteresis and locking into high‐spin states on tempering at 400 K, depending on the substituents on the btp ligands. Cyclic voltammetry studies of [Ru(btp)₂]²⁺ reveal strong modulation of the oxidation potentials by more than 0.6 V and a clear linear correlation to the Hammett constant (σ_para) of the substituent at the pyridine core. Isothermal titration calorimetry was used to measure the thermodynamics of the Fe^II–btp complexation process and enabled accurate determination of the complexation enthalpies, which display a linear relationship with the σ_para values for the terminal phenyl substituents. Detailed NMR spectroscopic studies finally revealed that in the case of Fe^II complexation, dynamics are rapid for all investigated btp derivatives in acetonitrile, while replacing Fe^II by Ru^II or changing the solvent to dichloromethane effectively slows down ligand exchange. The results nicely demonstrate the utility of substituent parameters, originally developed for linear free‐energy relationships to explain reactivity in organic reactions, in coordination chemistry, and to illustrate the potential to custom‐design btp ligands and complexes thereof with predictable properties. The fast equilibration of the [Fe(btp)₂]²⁺ complexes together with their tunable stability and interesting magnetic properties should enable the design of dynamic metallosupramolecular materials with advantageous properties.     

LC–MS Analysis of the Essential Oils of Achillea millefolium and Achillea crithmifolia

The chemical composition of the hydro-distilled essential oils of Achillea millefolium and Achillea crithmifolia was analyzed by GC, GC–MS, ¹³C NMR and high resolution LC–MS. For the first time, the use of the combination of different chromatographic and spectral methods, primarily the advantage of LC-Orbitrap over standard methods, enabled the detection of azulenes and their progenitors, in minute quantities, in previously believed proazulene free Achillea taxon (A. crithmifolia). Furthermore, the LC-Orbitrap hyphenated method provided the means for detection of these and related non-volatile (GC-injector compared to water steam distillation) metabolites up to know unreported as essential oil constituents.     

On the complexity of a bundle pricing problem

We consider the problem of pricing items in order to maximize the revenue obtainable from a set of single minded customers. We relate the tractability of the problem to structural properties of customers’ valuations: the problem admits an efficient approximation algorithm, parameterized along the inhomogeneity of the valuations.     

Transverse Laplacians for Substitution Tilings

Pearson and Bellissard recently built a spectral triple – the data of Riemannian noncommutative geometry – for ultrametric Cantor sets. They derived a family of Laplace–Beltrami like operators on those sets. Motivated by the applications to specific examples, we revisit their work for the transversals of tiling spaces, which are particular self-similar Cantor sets. We use Bratteli diagrams to encode the self-similarity, and Cuntz–Krieger algebras to implement it. We show that the abscissa of convergence of the ζ-function of the spectral triple gives indications on the exponent of complexity of the tiling. We determine completely the spectrum of the Laplace–Beltrami operators, give an explicit method of calculation for their eigenvalues, compute their Weyl asymptotics, and a Seeley equivalent for their heat kernels.     

Tuning hydrophobicity of platinum by small changes in surface morphology

Stepped platinum surfaces can become hydrophobic when they are hydrogenated. Even though the Pt(533) and Pt(553) surfaces have similar geometries, the hydrophobicity on the deuterated surface is surprisingly different: on Pt(533) the surface is hydrophobic with water clustering at steps, whereas the entire surface is wet on Pt(553).     

Spontaneous 2D modulation instability in second harmonic generation process

Two-dimensional modulation instability (2DMI) is experimentally demonstrated in a classical second harmonic generation setup. The spatial spectrum is measured and reveals typical 2DMI bands, in agreement with the analytical MI model. These observations are confirmed by (2 + 1)D numerical simulations.