Electrochemical solid-phase microextraction of anions and cations using polypyrrole coatings and an integrated three-electrode device

A method for the extraction, transfer and desorption of anions and cations under controlled potential conditions employing a new integrated three-electrode device is described. The device, containing working, reference and counter electrodes, was prepared from tubes that could be moved vertically with respect to each other. In this way, a small amount of solvent, held by capillary force, remained between the electrodes when the device was lifted out of a solution after an extraction. This design allowed the potential control to be maintained at all times. With the new integrated device, it was possible to perform potential controlled desorption into vials containing as little as 200 microl of solution. The required ion exchange capacity was obtained by electrodeposition of a polypyrrole coating on the surface of the glassy carbon working electrode. Solid-phase microextractions of several cations or anions were performed simultaneously under potentiostatic control by doping the polypyrrole coating with different anions such as perchlorate and p-toluenesulfonate. The efficiency of the extractions, which could be altered by varying the potential of the working electrode, could be increased by 150 to 200% compared to extractions using normal solid-phase microextraction conditions under open circuit conditions. A constant potential of +1.0 V and -0.5 V with respect to the silver pseudo reference electrode, was found to be well-suited for the extraction of samples containing ppm concentrations of anions (chloride, nitrite, bromide, nitrate, sulfate and phosphate) and cations (cadmium, cobalt and zinc), respectively.     

Estimates of the tail of the stationary density function of certain nonlinear autoregressive processes

We consider the Markov chainX _n+1=T(X _n )+ _n , where { _n ;n1} is a ^d -valued random sequence of independent identically distributed random variables, and the functionT: ^{d d} is measurable and satisfies a suitable growth condition. Under certain conditions involvingT and the probability distribution of _n , we show that this Markov chain is ergodic. Moreover, we obtain sharp upper bounds for the tail of the corresponding stationary probability density function. In our proofs, we make use of the Leray-Schauder fixed-point theorem.     

Perturbation about the mean field critical point

We consider two models that are small perturbations of Gaussian or mean field models: the first one is a double well /4⁴ — /2² perturbation of a massless Gaussian lattice field in the weak coupling limit (0, proportional to ). The other consists of a spin 1/2 Ising model with long-range Kac type interactions; the inverse range of the interaction, , is the small parameter. The second model is related to the first one via a sine-Gordon transformation. The lattice ^d has dimensiond3.In both cases we derive an asymptotic estimate to first order (in or ²) on the location of the critical point. Moreover, we prove bounds on the remainder of an expansion in or around the Gaussian or mean field critical points.The appendix, due to E. Speer, contains an extension of Weinberg's theorem on the divergence of Feynman graphs which is used in the proofs.Supported by NSF Grant # MCS 78-01885Supported by NSF Grant # PHY 78-15920     

Photopolymerized monolithic capillary columns for rapid micro high-performance liquid chromatographic separation of proteins

The preparation of monolithic poly(butyl methacrylate-co-ethylene dimethacrylate) capillary columns using photoinitiated in situ polymerization within 200 microm i.d. capillaries and their application for microHPLC separations of proteins have been studied. The low resistance to flow characteristic of monolithic columns, enabled the use of very high flow rates of up to 100 microL/min representing a flow velocity of 87 mm/s. Very good separations of a model protein mixture consisting of ribonuclease A, cytochrome c, myoglobin, and ovalbumin was achieved in less than 40 s using a very simple single step gradient of the mobile phase. Interestingly, no effect of the pore size on the separations of proteins was observed for these monolithic columns within the size range of 0.66-2.2 microm. The monolithic microHPLC columns are found very robust and no changes in the long term separation performance and back pressure were observed.     

Side-chain dynamics of an alpha-helical polypeptide monitored by fluorescence

The "blob" model, developed to analyze the fluorescence decays of polymers randomly labeled with pyrene, has been applied to a series of pyrene-labeled poly(glutamic acid)s (PyPGA) in DMF and carbonated buffer solutions at pH 9. Poly(glutamic acid) (PGA) exists in the ionized form in the buffer solutions as poly(sodium glutamate) (PGNa). PGA adopts an alpha-helical conformation in DMF, whereas in aqueous solution PGNa is a random coil. Fluorescence, UV-vis absorption, and circular dichroism measurements indicate that in our studies pyrene pendants attached themselves along PGA in a clustered manner. Simulations were carried out to establish that the geometry of the PGA alpha-helix induces the high level of pyrene clustering. Since the level of pyrene clustering decreased with lower pyrene content, information about naked PGA was retrieved by extrapolating the trends obtained by fluorescence to zero pyrene content. Analysis of the fluorescence decays demonstrated that during its lifetime an excited pyrene probes a 32 amino acid section of the PGA alpha-helix. This result was supported by molecular mechanics optimizations. This study establishes that the blob model, originally used to monitor the encounters between pyrenes attached randomly onto a polymer adopting a random coil conformation, can also be applied to study the dynamics of the side chains of structured proteins. Since the blob model helps in monitoring the encounters between amino acids in the initial state (i.e., random coil) and in the final state (i.e., structured protein) of the folding pathway of a protein, it could be applicable to the study of protein folding.     

Etude par spectrométrie de masse de la fragmentation du désoxy-3-di-O-isopropylidène-1,2: 5,6-méthylidène-3-α-D-hexofurannose et de quelques analogues substitués en C(3′)

Electron Impact Mass Spectrometry of the 3-Desoxy-1,2: 5,6-di-O-isopropylidene-3-methylidene-δ-D -hexofuranose and Some C(3′)-Substituted Analogues The mass spectra of the 3-desoxy-1,2:5, 6-di-O-isopropylidene-3-methylidene- α-D -ribo-hexofuranose and of some C(3′)-mono- and -disubstituted derivatives have been investigated. Deuterium labelled molecules allow fragmentation modes to be proposed.     

Infrared (1.2-1.6 microm) luminescence in Cr4+:Yb3Al5O12 single crystal with 940 nm diode pumping

Infrared (1.2-1.6 microm) luminescence in a ytterbium aluminium garnet (YbAG) crystal, doped with Cr (0.05at.%) ions, was investigated under CW laser diode pumping (lambda=940 nm). The Cr4+ emission band was observed with its peak at 1.34 microm and measured to be about 1.3 times with respect to Yb3+ IR luminescence (lambda=1.03 microm). We demonstrate that for the excitation wavelength of 940 nm Yb3+ ions act as sensitizers of the 3B2(3T2)-3B1(3A2) emission of Cr4+ ions. This crystal is promising as a high-efficient system for tunable laser (1.2-1.6 microm) output.     

Oligothienylenevinylenes incorporating 3,4-ethylenedioxythiophene (EDOT) units

A new series of π-conjugated oligomers based on various combinations of thiophene and EDOT units and double bonds has been synthesized by Wittig-Horner reactions from phosphonate anions carrying EDOT or bis-EDOT units. Optical and electrochemical results evidence the crucial role of the EDOT moiety for modulating the electronic properties of the oligomers. The insertion of bis-EDOT unit in the middle of the molecule leads to a self-rigidification of the conjugated system due to non covalent S?O intramolecular interactions. The strong electron donor effect of the EDOT units explains the determining role of the relative position of the EDOT units on the localization and stabilization of the positive charges in the radical cation or dication states.