New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Generation of Glycosyl Radicals from Glycosyl Sulfoxides and Its Use in the Synthesis of C‐linked Glycoconjugates

We here report glycosyl sulfoxides appended with an aryl iodide moiety as readily available, air and moisture stable precursors to glycosyl radicals. These glycosyl sulfoxides could be converted to glycosyl radicals by way of a rapid and efficient intramolecular radical substitution event. The use of this type of precursors enabled the synthesis of various complex C‐linked glycoconjugates under mild conditions. This reaction could be performed in aqueous media and is amenable to the synthesis of glycopeptidomimetics and carbohydrate‐DNA conjugates.     

Structure–property relationship in PCL/starch blend compatibilized with starch‐g‐PCL copolymer

The polycaprolactone (PCL)/starch blends were prepared by using the starch‐g‐PCL (SGCL) graft copolymers as compatibilizers, and their mechanical properties were correlated with the compatibilizing effect of the SGCL copolymers having various molecular structures. The modulus and strength of the PCL/starch blend were decreased, whereas the percent elongation and the toughness were increased remarkably with the addition of SGCL having appropriate graft structure. These property changes were analyzed in terms of the PCL crystallinity and the interfacial adhesion between the PCL matrix and starch dispersion phases, which were dominated by the compatibilizing effects of the SGCL copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2430–2438, 1999     

A Novel Route to the Fused Maleic Anhydride Moiety of CP Molecules

A seven‐step cascade reaction —in which selective mesylation, epoxide formation, epoxide lysis, cyclization, reiterative oxidation, and nitrogen–oxygen exchange occur sequentially—facilitates the construction of the maleic anhydride moiety of CP molecules 1 and 2 (>93% yield per step). Unstable intermediates of this reaction sequence were detected, providing evidence for the proposed mechanism and resulting in the discovery of a new chemical entity.     

New amphiphilic polymers: Poly(N-alkylacrylamide-CO-vinylpyridinium)

A series of new amphiphilic polymers containing various amounts of N-methyl-4-vinylpyridinium units as hydrophilic part and N-dodecylacrylamide or N-decylacrylamide units as hydrophobic part have been prepared by quaternizing the cognate copolymers. Their behaviour in aqueous solutions has been studied by viscometry, as well as by fluorescence spectroscopy and tensiometry. Results are discussed in detail and a conformational model of the macromolecules at the interface (water/methylcyclohexane) is proposed in relation to the formation of microdomains in the aqueous media.     

Three‐Component One‐Pot Synthesis of Indolo[3,4‐a]acridine Derivatives with High Regioselectivity under Catalyst‐Free Conditions

Three‐component reaction of aldehyde, 9‐ethyl‐9H‐carbazol‐3‐amine, and 5,5‐dimethyl cyclohexane‐1,3‐dione under catalyst‐free conditions in EtOH, regioselectivity gave corresponding indolo[3,4‐a]acridine rather than indolo[2,3‐b]acridine derivatives in high yields, which is confirmed by X‐ray diffraction analysis.     

Light-induced cis/trans isomerization of cis-[Pd(L-S,O)2] and cis-[Pt(L-S,O)2] complexes of chelating N,N-dialkyl-N′-acylthioureas: key to the formation and isolation of trans isomers

Irradiation cis-[M(Lⁿ-S,O)₂] complexes (M = Pt^II, Pd^II) derived from N,N-dialkyl-N′-benzoylthioureas (HLⁿ) with various sources of intense visible polychromatic or monochromatic light with λ < 500 nm leads to light-induced cis?→?trans isomerization in organic solvents. In all cases, white light derived from several sources or monochromatic blue-violet laser 405 nm light, efficiently results in substantial amounts of the trans isomer appearing in solution, as shown by ¹H NMR and/or reversed-phase HPLC separation in dilute solutions at room temperature. The extent and relative rates of cis/trans isomerization induced by in situ laser light (λ = 405 nm) of cis-[Pd(L²-S,O)₂] was directly monitored by ¹H NMR and ¹⁹⁵Pt NMR spectroscopy of selected cis-[Pt(L-S,O)₂] compounds in chloroform-d; both with and without light irradiation allows the δ(¹⁹⁵Pt) chemical shifts cis/trans isomer pairs to be recorded. The cis/trans isomers appear to be in a photo-thermal equilibrium between the thermodynamically favored cis isomer and its trans counterpart. In the dark, the trans isomer reverts back to the cis complex in what is probably a thermal process. The light-induced cis/trans process is the key to preparing and isolating the rare trans complexes which cannot be prepared by conventional synthesis as confirmed by the first example of trans-[Pd(L-S,O)₂] characterized by single-crystal X-ray diffraction, deliberately prepared after photo-induced isomerization in acetonitrile solution.     

Nitrogen‐Doped Ordered Mesoporous Carbon Supported Bimetallic PtCo Nanoparticles for Upgrading of Biophenolics

Hydrodeoxygenation (HDO) is an attractive route for the upgrading of bio‐oils produced from lignocellulose. Current catalysts require harsh conditions to effect HDO, decreasing the process efficiency in terms of energy and carbon balance. Herein we report a novel and facile method for synthesizing bimetallic PtCo nanoparticle catalysts (ca. 1.5 nm) highly dispersed in the framework of nitrogen‐doped ordered mesoporous carbon (NOMC) for this reaction. We demonstrate that NOMC with either 2D hexagonal (p6m) or 3D cubic (Im m) structure can be easily synthesized by simply adjusting the polymerization temperature. We also demonstrate that PtCo/NOMC (metal loading: Pt 9.90 wt %; Co 3.31 wt %) is a highly effective catalyst for HDO of phenolic compounds and “real‐world” biomass‐derived phenolic streams. In the presence of PtCo/NOMC, full deoxygenation of phenolic compounds and a biomass‐derived phenolic stream is achieved under conditions of low severity.     

Radical Hydrodeiodination of Aryl,Alkenyl, Alkynyl,and Alkyl Iodides with an Alcoholate as Organic Chain Reductant through Electron Catalysis

A simple and efficient method for radical hydrodeiodination is reported. The novel approach uses electron catalysis. In situ generated Na‐alcoholates are introduced as radical chain reducing reagents and reactions work with O₂ as cheap initiator. Hydrodeiodination works on aryl, alkenyl, alkynyl iodides and a tert‐alkyl iodide also gets reduced applying the method. Albeit less general, the method is also applicable to the reduction of aryl bromides. The novel reagent is successfully used to conduct typical reductive radical cyclization reactions and mechanistic studies are reported.     

Dry Reforming of Methane on a Highly‐Active Ni‐CeO2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Ni‐CeO₂ is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO₂ at temperatures as low as 300 K, generating CH_x and CO_x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO_2?x(111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH_x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.