Complex copper(II) fluorides. XV. The Ternary System BaF2?CuF2?ScF3

The liquid-solid phase diagram of the binary system BaF₂? ScF₃ is established by D.T.A. and radiocrystallography. Three fluorides are disclosed: Ba₃Sc₂F₁₂, Ba₅Sc₃F₁₉ and a cubic high temperature phase Ba_1?xSc_xF_2+x (x = 0.17), the structure of which derives from that of BaF₂. A solid solution between BaF₂ and ScF₃ is also evidenced at high temperature. The ternary system BaF₂? CuF₂? ScF₃ is investigated by radiocrystallography and an isothermal section at 670°C is given. It shows the existence of four phases: a complex quaternary fluoride Ba₁₀Cu₁₂ScF₄₇, two “polytypic” phases the structure of which derives from that of BaCuF₄ and a tetragonal solid solution Ba₅Sc_3?xCu_xF_19?x with 0 ≤ x ≤ 1.     

Cyclocopolymerization of dicyclic dienes and maleic anhydride to fused ring systems

The cyclocopolymerization of maleic anhydride and four 1,5- and 1,6-dienes (bicyclopentene, bicyclohexene, dicyclopentenyl ether, and dicyclohexenyl ether) and one tetraene (quartercyclopentene) is described. Soluble, low molecular weight copolymers were obtained from all five compounds. Their compositions approach 2:1 copolymer ratios. Fused ring structures are proposed as the main repeating units. Among the compounds listed, bicyclopentene copolymerized most easily and gave good conversions for monomer ratios of 2:1. Quartercyclopentene and dicyclopentyl ether, the other five-membered ring compounds, also polymerized to good-to-fair yields. However, a monomer ratio of about 4:1 was required to obtain conversions comparable to a 2:1 maleic anhydride—bicyclopentene polymerization. The six-membered systems, bicyclopentene and dicyclopentenyl ether, gave consistently low conversions, even with a 4:1 monomer ratio. The influence of the initiator system, initiator concentration, and reaction medium was studied on copolymerizations of bicyclopentene. Best results were obtained in acetic anhydride with azobisisobutyronitrile as the initiator.     

(Z)‐1‐Ferrocenyl‐3‐(3‐hydroxy­anilino)­but‐2‐en‐1‐one and (Z)‐1‐ferrocenyl‐3‐(4‐hydroxy­anilino)­but‐2‐en‐1‐one

The title compounds, both [Fe(C₅H₅)(C₁₅H₁₄NO₂)], crystallize with Z′ = 2 in the centrosymmetric space group P. In each compound, there is an intra­molecular N—H⋯O=C hydrogen bond, and pairs of inter­molecular O—H⋯O=C hydrogen bonds link the mol­ecules into chains, parallel to [10] in the 3‐hydr­oxy compound and parallel to [10] in the 4‐hydr­oxy compound.     

Synthesis,characterization and biological activity of some 1,2,4‐triazine derivatives

4‐Amino‐6‐methyl‐3‐(2H)‐thioxo‐5‐(4H)‐oxo‐1,2,4‐triazine ( 1 ) was condensed with 2‐methyl (or phenyl)‐4H‐3,1‐benzoxazin‐4‐one ( 5a,b ) in boiling acetic acid to give compounds 8‐11 . Reacting 1 with chloroacetyl chloride afforded the corresponding chloroacetamido and triazinothiadiazine derivatives 12 and 13 . Condensing 2 with succinic anhydride and/or phthalic anhydride yielded compounds 14 and 15 . Benzoylation of 4‐amino‐6‐methyl‐3‐(2H)‐thioxo‐5‐(4H)‐oxo‐2‐(2,3,4,5‐tetra‐O‐acetyl‐α‐D‐glucopyra‐nosyl)‐1,2,4‐triazine ( 19 ) afforded the corresponding 4‐N,N‐dibenzoyl derivative 20 . Deblocking of the N‐2 glycoside 21 and the S‐glycoside 22 by methanolic ammonia gave compounds 23 and 24 . Acetylation of 4‐amino glycoside 25a afforded the corresponding 4‐mono‐ and 4‐diacetyl derivatives 26 and 27 . Deamination of 25a,b yielded compounds 28a,b . Methylation of compound 28b afforded the corresponding N4‐ and S‐methyl derivatives 29 and 30 .     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.     

Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Spectroscopic characterization and preparation of low molecular,water‐soluble chitosan with free‐amine group by novel method

Low molecular, water‐soluble chitosan (LMWSC) with a free amine group was prepared by the novel salts‐removal method described in this study. A weight‐average molecular weight and degree of deacetylation (DDA) of LMWSC were determined by viscometry and Kina titration, resulting in 18,579 Da and 93% DDA, respectively. In the Fourier transform infrared spectroscopic, ¹H NMR, and ¹³C NMR spectra the absorption band by the carboxyl group derived from lactic acid and the impurities formed in the enzymatic process disappeared or were significantly lower than that of the control chitosan. Also, from the ¹H NMR and ¹³C NMR spectra the empirical value for the area ratio of the proton and carbon corresponds nearly to its theoretical values. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum identified the difference in the two adjacent peaks as 161. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3796–3803, 2002     

Enaminosucres et sucres halogénoacétyléniques. Communication préliminaire

Enamino- and Halogenoacetylenic sugars Traitment of an aldehydosugar ( 1 ) with secondary amines gave in an essentially quantitative yield the expected enamines ( 4–6 ). Chloro- and bromo-acetylenic sugars ( 11–14 ) were obtained in good yields by reacting with lithium methylphenylamide the corresponding gem-dihalo-olefinic sugars ( 7–10 ), whereas a Z-gem-fluoro-enamine ( 17 ) was formed when the difluoro-olefinic sugar 15 was submitted to the same reaction. The fluoro-enamine 17 is a useful synthetic intermediate allowing the preparation of several kinds of C-glycosylic compounds bearing heterocycles like isoxazole, chromone or coumarin.     

Synthesis and 1H NMR study of 3,4-di ethyl-1,2,3,3a,4,5-hexahydro-canthinone-6

The racemic mixtures of the two epimers of 3,4-diethyl-l,2,3,3a,4,5-hexahydro-canthinone-6 (3,4-diethyl-2,3,3a,4,5,6-hexahydro-6-oxo-1H-indolo-(3,2,1 ,de) (1,5)naphtyridine) have been prepared. They were separated by crystallization of one of the synthesis intermediates. Identification of the configuration was possible by 1h NMR spectroscopy after running a 2D J-resolved spectrum of the “cis”-isomer.     

Angular to linear rearrangement of an isoindolo[2,1-a]quinazoline skeleton

Demethylation of the angular 3-methoxyisoindolo[2,1-a]quinazolin-11(5H)-one by pyridinium chloride led to the rearranged linear 8-hydroxyisoindolo[1,2-b]quinazolin-12(10H)-one.