Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.     

Effective and selective aerobic oxidation of primary and secondary alcohols using CoFe2O4@HT@Imine‐CuII and TEMPO in the air atmosphere

In this study, we present a versatile and easy procedure for modifying a cobalt ferrite nanoparticle step by step. A new nanocatalyst was prepared via Cu^II immobilized onto CoFe₂O₄@HT@Imine. The catalyst was fully characterized by Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), and vibrating sample magnetometer (VSM) analyses. The current procedure as a green protocol offers benefits including a simple operational method, an excellent yield of products, mild reaction conditions, minimum chemical wastes, and short reaction times. Without any significant reduction in the catalytic performance, up to five recyclability cycles of the catalyst were obtained. The optimization results suggest that the best condition in the oxidation of benzyl alcohol derivatives is 0.003 g of the CoFe₂O₄@HT@Imine‐Cu^II catalyst, TEMPO, at 70°C under solvent‐free condition and air.     

Enantioselective analysis of venlafaxine and its active metabolites: A review on the separation methodologies

Venlafaxine (VFX) is a serotonin and norepinephrine reuptake inhibitor chiral drug used in therapy as an antidepressant in the form of a racemate consisting of R‐ and S‐VFX. The two enantiomers of VFX exhibit different pharmacological activities: R‐VFX inhibits both norepinephrine and serotonin synaptic reuptake, whereas S‐VFX inhibits only the serotonin one. R‐ and S‐VFX are metabolized in the liver to the respective R‐ and S‐O‐desmethylvenlafaxine (ODVFX), R‐ and S‐N‐desmethylvenlafaxine (NDVFX), and R‐ and S‐N,O‐didesmethylvenlafaxine (NODVFX). The pharmacological profile of ODVFX is close to that of VFX, whereas the other two chiral metabolites (NDVFX and NODVFX) have lower affinity for the receptor sites. The pharmacokinetics of the VFX enantiomers appear stereoselective, including the metabolism process. In the past 20 years, several studies describing the enantioselective analysis of R‐ and S‐VFX in pharmaceutical formulations and its chiral metabolites in biological matrices were published. These methods encompass liquid chromatography coupled with UV detection, mass spectrometry, or tandem mass spectrometry, and capillary electrophoresis. This paper reviews the published methods used for the determination of the individual enantiomers of VFX and its chiral metabolites in different matrices.     

Living ring-opening metathesis polymerization of norbornenes bay-functionalized perylene diimides

Ring-opening metathesis polymerization (ROMP)-derived poly(oxanorbornene imide)s bearing bay-linked mono - alkoxy -M1 and 1,7-di-alkoxy M2 functionalized perylene diimides (PDIs) were synthesized using Grubb's third ( G3 ) and Hoveyda-Grubbs second generation ( HG2 ) ruthenium-alkylidene metathesis initiators. The mono-alkoxy-derived PDI-based non-ladderphane polymer poly M1 displayed 67% to 77% of the trans olefin content in the polymer chain depending on the initiator used for the polymerization. When using the symmetrical 1,7-di-alkoxy-derived PDI-based polymer poly M2 having the ladderphane type-structure, this displayed a significant amount of cis and trans olefin contents in the polymer chains, irrespective of the type of initiators used for the polymerization. ROMP of both monomers M1 and M2 proceeded in a well-controlled manner with a linear dependence of molecular weight on the monomer/initiator ratio using G3 as initiator. Optical properties of the ladderphane-based poly M2 and non-ladderphane-based poly M1 were characterized in both solution and the film state. X-ray diffraction (XRD) analysis for all the polymers showed significant π-stacking in the thin film state with ordered molecular packing and closer values of d-spacing for both poly M1 and poly M2 . Film morphology examined by AFM elucidated homogenous smooth polymer surface for both polymers in general, but with some irregularities observed for poly M1 . In addition, CV analysis revealed both polymers could be good candidates as electron-accepting materials, with excellent film-forming ability, and thermal stability.     

Coumarin-based D–π–A dyes for efficient DSSCs: DFT and TD-DFT study of the π-spacers influence on photovoltaic properties

Research on Chemical Intermediates - A series of D–π–A architectures dyes with Coumarin-based derivatives as difluorenylaminocoumarin (DF) and diphenylaminocoumarin (DP) have been...     

Elemental analysis of particulate matter in a metal workshop and of biological samples from exposed workers

During metal welding and cutting, large amounts of particulate matter (PM) are produced that might represent a significant health risk for the exposed workers. In the present pilot study, we performed an elemental analysis of fine PM collected in a metal workshop. Also, elemental analysis of the hair and nail samples collected from workers exposed to the workshop dust and control group was done. Concentrations of 15 elements in PM were measured with X‐Ray Fluorescence (XRF) and Particle Induced X‐ray Emission (PIXE), whereas inductively coupled plasma mass spectrometry (ICP‐MS) was used to determine 12 elements in hair and nail samples. Mean 8‐hr concentrations of PM_2.5, Fe, and Mn in the vicinity of welders were up to 1803, 860, and 30 μg/m³, respectively, whereas in the nearby city, daily PM_2.5 concentrations are on average 11 μg/m³. We found that several elements, especially Fe and Mn, had substantially higher concentrations in hair and nail samples of exposed workers than in the control group, which indicates the accumulation of metals in workers' tissues, although limit values were not exceeded.     

The polyphenolic profiles and antioxidant effects of Agastache rugosa Kuntze (Banga) flower,leaf, stem and root

Agastache rugosa Kuntze (Korean mint) is used as a spice and in folk medicine in East Asia. The present study identified a total of 18 polyphenols from the flower, leaf, stem and roots of this plant using high‐performance liquid chromatography–tandem mass spectrometry. Fourteen of these compounds had not previously been identified in these plant tissues. Each polyphenol was validated in comparison with external calibration curves constructed using structurally related compounds, with determination coefficients >0.9993. The limits of detection and quantification were 0.092–0.650 and 0.307–2.167 mg/L, respectively. Recoveries of 61.92–116.44% were observed at two spiking levels, with 0.91–11% precision, expressed as relative standard deviation (except anthraquinone spiked at 10 mg/L). Hydroxycinnamic acid was the most abundant compound in the root, while the flowers showed the highest total flavonoid level. Antioxidant activities, determined in terms of reducing power, Fe²⁺ chelating activity and the radical scavenging activities using α,α‐diphenyl‐β‐picrylhydrazyl and 2‐2?‐azino‐bis‐3‐ethylbenzothiazoline‐6‐sulfonic acid, increased in a concentration‐dependent manner; the highest activity was identified in the stems, followed by leaves > flowers > roots. These findings indicate that A. rugosa is a good source of bioactive compounds and can be used as a functional food. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,structure and catalytic polymerization activity of half‐sandwich cyclometallated iridium complexes

A series of mononuclear half‐sandwich cyclometallated iridium complexes with Schiff base ligands were synthesized in good yields. Five air‐stable C,N‐chelate mode complexes were obtained smoothly through metal‐mediated C─H bond activation. Treatments of dimeric metal complexes [Cp*IrCl₂]₂ with ligands L1–L5 afforded the corresponding C,N‐chelate mononuclear half‐sandwich iridium(III) complexes 1 – 5 . These iridium complexes exhibit high catalytic activity for norbornene polymerization. Both steric and electronic effects of the substituted groups have influences on the behaviors of the polymerization process. All complexes were characterized using infrared and NMR spectroscopies and elemental analysis. Molecular structures of complexes 1 , 2 and 5 were further confirmed using single‐crystal X‐ray analysis.     

Seed‐Mediated Synthesis of Gold Tetrahedra in High Purity and with Tunable,Well‐Controlled Sizes

We report a facile synthesis of Au tetrahedra in high purity and with tunable, well‐controlled sizes via seed‐mediated growth. The success of this synthesis relies on the use of single‐crystal, spherical Au nanocrystals as the seeds and manipulation of the reaction kinetics to induce an unsymmetrical growth pattern for the seeds. In particular, the dropwise addition of a precursor solution with a syringe pump, assisted by cetyltrimethylammonium chloride and bromide at appropriate concentrations, was found to be critical to the formation of Au tetrahedra in high purity. Their sizes could be readily tuned in the range of 30–60 nm by simply varying the amount of precursor added to the reaction solution. The current strategy not only enables the synthesis of Au tetrahedra with tunable and controlled sizes but also provides a facile and versatile approach to reducing the symmetry of nanocrystals made of a face‐centered cubic lattice.