Studies on diastereoselective reduction of cyclic β-ketoesters with boron hydrides. Part 4: The reductive profile of functionalized cyclohexanone derivatives

Reduction of 2-allyl-2-carboalkoxycyclohexanones (3d-f), 2-propyl-2-carboethoxycyclohexanone (3g) and 2-benzyl-2-carboethoxycyclohexanone (3h) with boron hydrides in the presence and absence of several chelating agents were studied. Molecular modeling studies using semiempirical PM3 method were performed in order to find a suitable explanation of the diastereoselection of ketone carbonyl faces during the reductive process, which yielded trans-2-allyl-2-carboethoxycyclohexanol (6e) and cis-2-allyl-2-carboethoxycyclohexanol (7e) in good diastereomeric excess by using inexpensive sodium and tetrabutylammonium borohydrides.     

Molecular dynamics simulation of the spontaneous formation of a small DPPC vesicle in water in atomistic detail

Molecular dynamics simulations have been used to study the spontaneous aggregation of a concentrated solution of dipalmitoylphosphatidylcholine (DPPC) molecules in water into a small vesicle. The molecules were represented in atomistic detail. Starting from a DPPC solution in water, an oblong vesicle with a long axis of 15 nm and short axes of 10 nm was formed spontaneously. After 90 ns of simulation, the vesicle contained a number of water pores. Water pores were shown to facilitate exchange of lipids between inner and outer leaflets. Lipid tails were shown to be less ordered in the inner leaflet of the vesicle, as compared to those in the outer leaflet of the vesicle and an equilibrated lamellar bilayer.     

Individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wines by flow injection analysis

The individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wine by flow injection analysis is described. Individual determinations of 0.002–0.016% (v/v) ethanol or 1.0–8.0 μg ml^?1 acetaldehyde with r.s.d. 0.7% and 0.5%, respectively, are done with a single-beam spectrophotometer, based on the use of alcohol dehydrogenase and aldehyde dehydrogenase. A diode-array detector and dual reagent injections are used for the simultaneous determination of the two compounds. The errors are 〈 3.5% and 〈 2.0% for ethanol and acetaldehyde, respectively, when the method is applied to wine samples.     

Low-temperature destruction of carbon tetrachloride over lanthanide oxide-based catalysts: from destructive adsorption to a catalytic reaction cycle

The catalytic destruction of carbon tetrachloride in the presence of steam, CCl(4) + 2 H(2)O-->4 HCl + CO(2), was investigated at 200-350 degrees C over a series of lanthanide (La, Ce, Pr and Nd) and alkaline-earth metal (Mg, Ca, Sr and Ba) oxide-based catalysts with kinetic experiments, Raman spectroscopy, X-ray photoelectron spectroscopy, IR spectroscopy, X-ray diffraction, and DFT calculations. This new catalytic reaction was achieved by combining destructive adsorption of CCl(4) on a basic oxide surface and concurrent dechlorination of the resulting partially chlorinated solid by steam. The combination of the two noncatalytic reactions into a catalytic cycle provided a rare opportunity in heterogeneous catalysis for studying the nature and extent of surface participation in the overall reaction chemistry. The reaction is proposed to proceed over a terminal lattice oxygen site with stepwise donation of chlorine atoms from the hydrocarbon to the surface and formation of the gas-phase intermediate COCl(2), which is readily readsorbed at the catalyst surface to form CO(2). In a second step, the active catalyst surface is regenerated by steam with formation of gas-phase HCl. Depending on the reaction conditions, the catalytic material was found to transform dynamically from the metal oxide state to the metal oxide chloride or metal chloride state due to the bulk diffusion of oxygen and chlorine atoms. A catalyst obtained from a 10 wt % La(2)O(3)/Al(2)O(3) precursor exhibited the highest destruction rate: 0.289 g CCl(4) h(-1) g(-1) catalyst at 350 degrees C, which is higher than that of any other reported catalyst system.     

Comparison of single extraction procedures,using either conventional shaking or microwave heating,and the Tessier sequential extraction method for the fractionation of heavy metals from environmental samples

The conventional four-step sequential extraction method and the EDTA and acetic acid single extraction procedures were applied to sewage sludge and sediment samples. The results obtained with these samples for Cu, Cr, Ni, Pb and Zn using the Tessier method were compared with those supplied by the two single extraction procedures employed. In addition, the Tessier method was also applied to a reference material, CRM 483, and these results were also compared with the certified EDTA and acetic acid values for this sample. As a result, good agreement was found between the metal contents released in the first three fractions of the Tessier method and those leached by the simpler single extraction procedures for the most of the elements studied. Subsequently, the conventional EDTA and acetic acid extraction methods were accelerated by means of microwave energy, in order to reduce the operating time. The extraction efficiency of the first three fractions of the Tessier method was compared with that obtained using the optimised microwave single extraction procedures and only in sewage sludge and CRM 483 samples were satisfactory results found for all the elements studied, except Cr and Pb. This means that the microwave single extraction procedures optimised in this work could be employed as screening methods to evaluate rapidly the easiest mobilizable heavy metals in these samples, although more samples should be analysed to determine their general applicability. The application of the accelerated single extraction procedures to a reference material, CRM 483, provided satisfactory results for all the elements studied, except for Cr in both methods and for Pb in the acetic acid extracts.     

Carbocyclic analogues of nucleosides from bis-(Hydroxymethyl)-cyclopentane: synthesis,antiviral and cytostatic activities of adenosine,inosine and uridine analogues

Six new carbocyclic nucleosides were prepared by constructing a purine base (in compounds 9-11) or pyrimidine base (in 6-8) on the amino groups of (+/-)-(1 beta,2 alpha,4 beta)-4-amino-1,2-cyclopentanedimethanol (4) and (+/-)-(1 beta,3 alpha,4 beta)-4-amino-1,3-cyclopentanedimethanol (5), and their activities against a variety of viruses and tumour cell lines were determined.     

Heats of formation of [2.2]paracyclophane-1-ene and [2.2]paracyclophane-1,9-diene - an experimental study

The enthalpies of formation [Delta(g)] of tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),10(14),11-heptaene (2, 1,2-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1-ene) and tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),8,10(14),11-octaene (3, 1,2,9,10-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1,9-diene) have been determined by measuring their heats of combustion in a microcalorimeter and their heats of sublimation by the transpiration method. Values of the strain energies (SE) [SE(2) = 34.7 kcal mol(-)(1), SE(3) = 42.0 kcal mol(-)(1)] have been derived from the gas-phase heats of formation and are compared with those from MM3 and PM3 calculations and with the corresponding value SE(1) = 30.1 kcal mol(-)(1) for the parent tricyclo[8.2.2.2(4,7)]hexadeca-1(13),4(16),5,7(15),10(14),11-hexaene (1, [2.2]paracyclophane). The higher strain energies of 2 and 3 (by 4.6 and 11.9 kcal mol(-)(1)) are in accord with the well-known increased reactivities of their aromatic rings as a consequence of their increased bending. As revealed by an X-ray crystal structure analysis, the bending in the monoene 2 corresponds to that of 1 and 3 at one of two bridging corners.     

Homeopathic ligand-free palladium as a catalyst in the heck reaction. A comparison with a palladacycle

[reaction: see text] Ligand-free Pd(OAc)(2) can be used as a catalyst in the Heck reaction of aryl bromides as long as the amount of catalyst is kept between 0.01 and 0.1 mol %. At higher concentrations palladium black forms and the reaction stops. The actual catalyst is monomeric. Palladacycles merely serve as a source of ligand-free palladium in Heck reactions of aryl bromides.     

Palladium-catalyzed synthesis of novel optically active tryptophan analogues

[reaction: see text] Both unsaturated proline derivatives and optically active tryptophan analogues have been obtained via Pd-catalyzed cyclization of aniline-containing acetylenic amino acids. The side chain length of the cyclization precursor determines which one of the two possible products will be formed.     

UVB irradiation of normal human skin favors the development of type-2 T-cells in vivo and in primary dermal cell cultures

To determine the effect of UVB exposure on the balance of type-1 or type-2 T-cells in skin, we examined the expression of key markers interferon (IFN)-gamma and interleukin (IL)-4 in cryostat sections. IFN-gamma mRNA was clearly detectable in nonirradiated control skin, and IFN-gamma protein was found in 2% of the dermal CD3pos T-cells, whereas IL-4 mRNA was hardly detectable, and no IL-4 protein was found. In contrast, IL-4 mRNA expression increased upon irradiation, and IL-4 was found in 2% of the T-cells at day 2 after UVB-exposure. Concomitantly, IFN-gamma mRNA expression decreased, and IFN-gamma protein became absent. We also analyzed T-cells present in primary dermal cell cultures, which were used as an in vitro equivalent of the in vivo situation. As compared with T-cells from control skin, T-cells in dermal cell cultures from UVB-exposed skin displayed an increased IL-4 and decreased IFN-gamma expression. No such skewing occurred when the T-cells from irradiated skin were cloned in the absence of a dermal microenvironment. Except for an occasional positive T-cell, type-1-associated cell-surface markers (CCR5, CXCR3) or type-2 markers (CCR3, CD30, CRTH2) were undetectable in situ. But these markers were expressed on cultured dermal T-cells from UVB-exposed and control skin at a comparable level, but did not correlate with the IFN-gamma and IL-4 production. Altogether, UVB-induced changes of the dermal microenvironment favor the development of type-2 T-cells.