Theoretical study of alkyl-pi and aryl-pi interactions. Reconciling theory and experiment

Quantum mechanical and quantum mechanical/molecular mechanical calculations in conjunction with continuum solvation models have been used to analyze CH-pi interactions in model systems of aryl- and alkyl-aromatic interactions, as well as in a model folding system designed to study those interactions. High level calculations reproduced accurately the interaction of CH-pi interactions in both alkyl- and aryl-based model systems. Dispersion effects dominate the interaction, but the electrostatics term is also relevant for aryl CH-pi interactions. Theoretical calculations were also used to examine the influence of CH-pi interactions in determining the conformational flexibility of folding models. Finally, a critical comparison of the results obtained from high level calculations on model systems and the experimental data derived for folding models in apolar solvents was carried out, which allowed us to reconcile the apparent discrepancy found between both data.     

Cooperative effects in phospholipid monolayers induced by a peptide from HIV-1 capsid protein

The study of interactions between biological molecules and model membranes is essential for the understanding of a number of physiological mechanisms involved in viral infections and dissemination. In this paper, the analysis of the interaction between a peptide from the p24 protein of Human Immunodeficiency Virus type 1 (HIV-1) and a phospholipid monolayer has pointed to a cooperative response in which very small amounts of peptide p24-1 (e.g. 0.05 mol%) can lead to measurable effects. Monolayer surface pressure and surface potential isotherms were affected for peptide concentrations as low as 0.05 mol%, with saturation at 0.5 mol%. The expansion effect from p24-1 is confirmed by changes in morphology of the monolayers using Brewster angle microscopy. Even though p24-1 is disordered in aqueous solutions, the interaction with dipalmitoyl phosphatidylcholine (DPPC) causes it to adopt an alpha-helix structure, as shown by circular dichroism (CD) data for multilamellar vesicles (MLV). The expansion of the phospholipid monolayer in a cooperative way may imply that p24-1 has potential antiviral activity, by participating in the cell rupture, with no need of specific receptors in the membrane.     

Ambiphilic boryl groups in a neutral Ni(ii) complex: a new activation mode of H2

The concept of metal–ligand cooperation opens new avenues for the design of catalytic systems that may offer alternative reactivity patterns to the existing ones. Investigations of this concept with ligands bearing a boron center in their skeleton established mechanistic pathways for the activation of small molecules in which the boron atom usually performs as an electrophile. Here, we show how this electrophilic behavior can be modified by the ligand trans to the boron center, evincing its ambiphilic nature. Treatment of diphosphinoboryl (PBP) nickel–methyl complex 1 with bis(catecholato)diboron (B₂Cat₂) allows for the synthesis of nickel(ii) bis-boryl complex 3 that promotes the clean and reversible heterolytic cleavage of dihydrogen leading to the formation of dihydroborate nickel complex 4. Density functional theory analysis of this reaction revealed that the heterolytic activation of H₂ is facilitated by the cooperation of both boryl moieties and the metal atom in a concerted mechanism that involves a Ni(ii)/Ni(0)/Ni(ii) process. Contrary to 1, the boron atom from the PBP ligand in 3 behaves as a nucleophile, accepting a formally protic hydrogen, whereas the catecholboryl moiety acts as an electrophile, receiving the attack from the hydride-like fragment. This manifests the dramatic change in the electronic properties of a ligand by tuning the substituent trans to it and constitutes an unprecedented cooperative mechanism that involves two boryl ligands in the same molecule operating differently, one as a Lewis acid and the other one as a Lewis base, in cooperation with the metal. In addition, reactivity towards different nucleophiles such as amines or ammonia confirmed the electrophilic nature of the Bcat moiety, allowing the formation of aminoboranes.

A bis(boryl)nickel complex promotes the facile and reversible activation of H₂ through a cooperative mechanism that involves the metal and both boryl moieties in a concerted five-center process.     

Application of molecular absorption properties of horseradish peroxidase for self-indicating enzymatic interactions and analytical methods

In this paper an in depth study is presented of the use of the horseradish peroxidase (HRP) enzyme as a self-indicating biorecognition reagent in UV-vis molecular absorption spectrometry. The HRP/H2O2 reaction mechanism in the absence of an external substrate has been clarified, and the interaction between HRP and glucose oxidase (GOx) has been studied. It has been demonstrated that GOx can act as a substrate of HRP; in both cases the kinetic constants have been obtained and mathematical models have been developed. Second, the HRP/H2O2 reaction is used to follow a H2O2-producing enzymatic reaction, the glucose reaction with GOx being used as a model. As an application of this, two methodologies have been proposed for glucose determination: with or without previous incubation of glucose with GOx. In both cases mathematical models relating HRP absorbance changes to glucose concentration have been developed and tested; both methods have been optimized, analytically characterized, and tested for glucose determination in samples. The methodology described could be applied to other heme-proteins and to other H2O2-producing enzymatic reactions. The models permit the reaction constants to be calculated. From the analytical chemistry point of view the models allow the prediction of the method sensitivity for other analytes involved in this type of reaction if the kinetic constants are known and can be used in the design of optical sensors.     

Tautomeric conjugate acids of 2-aminopyrroles: effect of substituents, solvation and cosolute

The tautomeric preferences of the conjugated acids of 2-aminopyrrole derivatives have been examined both in the gas phase and in aqueous solution by using a combination of quantum mechanical, self-consistent reaction field and Monte Carlo–free-energy perturbation methods. The results show that the nature of substituents, the solvent and the presence of cosolute are relevant factors in modulating the relative stability between the tautomeric conjugate acids protonated at the heterocyclic ring and at the exocyclic amino nitrogen. Thus, attachment of electron-withdrawing groups to the ring, solvation in polar solvents, and the presence of negatively charged cosolutes tend to favor protonation at the exocyclic amino nitrogen. Nevertheless, none of these factors alone suffice to change the tautomeric preference for the ring-protonated forms. The results point out that the concerted occurrence of the three factors is necessary to shift the tautomeric preference towards the conjugated species protonated at the exocyclic nitrogen.Contribution to the Jacopo Tomasi Honorary Issue     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

Primary Transformation Rate Measurements Through Differential Scanning Calorimetry

The primary crystallization of molten alloy systems at high undercooling is studied by a precise quantitative analysis of the calorimetric signal obtained during the transformation in terms of the reaction rate under isothermal and continuous heating regimes. It is shown that, under specific conditions, namely, stoechiometric primary precipitates, generalized relationships for the crystallization enthalpy and the reaction rate may be obtained.