Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.     

Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Unified and generalized Fresnel numbers

The concept of Fresnel number is discussed and expressions are derived for misaligned optical systems. For the case of perfectly aligned optical elements, the usual number,N, based on a Fresnel zone concept is found to be given byN = (a ²/)(D ₁/B ₁ +A ₂/B ₂), whereB ₁,D ₁ andB ₂,A ₂ are the transfer matrix elements of the optical systems before and after a circular aperture of radiusa respectively. A modified definition of the Fresnel number is proposed for Gaussian beam propagation. This parameterN _G, is related to the complex beam parameter and may be represented by the angle = tan^–1 N _G, found in the familiar Collins chart and its dual representation. A general relation for the transformation of this Fresnel number is found. The expressions for Gaussian beam transformation are thus simplified, since the waist-waist transform is given byN _G1 =N _G2 = 0. Finally, these two kinds of Fresnel numbers are written as tensors when applied to cases involving elliptical apertures, astigmatic beams and nonsymmetrical systems.     

New oxamidato-bridged Cu(II)-Ni(II) complexes: supramolecular structures with thiocyanate ligands and hydrogen bonds. Magnetostructural studies: DFT calculations

Four new supramolecular compounds of Cu(II)-Ni(II) have been synthesized and characterized: [Cu(Me(2)oxpn)Ni(mu-NCS)(H(2)O)(tmen)](2)(ClO(4))(2) (1), [Cu(Me(2)oxpn)Ni(mu-NCS)(H(2)O)(tmen)](2)(PF(6))(2) (2), [Cu(oxpn)Ni(mu-NCS)(NCS) (tmen)](n) (3), and [Cu(Me(2)oxpn)Ni(mu-NCS)(NCS)(tmen)](n) (4), where oxpn = N,N'-bis(3-aminopropyl)oxamidate, Me(2)oxpn = N,N'-bis(3-amino-2,2'-dimethylpropyl)oxamidate, and tmen = N,N,N',N'-tetramethylethylenediamine. Their crystal structures were solved. Complexes 1 and 2 have the same tetranuclear cationic part but a different counteranion. The cationic part consists of two [Cu(Me(2)oxpn)Ni] moieties linked by SCN(-) bridged ligands and intra-tetranuclear hydrogen bonds. In the case of complex 3, a two-dimensional system was built, the thiocyanate ligand linking the dinuclear units gives a chain, and the chains are linked together by hydrogen bonds; intrachain hydrogen bonds are also present. For complex 4, the thiocyanate ligands produce intermolecular linkages between the dinuclear entities, giving a one-dimensional system; intrachain hydrogen bonds are also present. The magnetic properties of the four complexes were studied by susceptibility measurements vs temperature. DFT calculations were made to study the contribution of the SCN(-) and hydrogen bond bridges in the magnetic coupling.     

Pressurized liquid extracts from Spirulina platensis microalga. Determination of their antioxidant activity and preliminary analysis by micellar electrokinetic chromatography

In this work, different extracts from the microalga Spirulina platensis are obtained using pressurized liquid extraction (PLE) and four different solvents (hexane, light petroleum, ethanol and water). Different extraction temperatures (115 and 170 degrees C) were tested using extraction times ranging from 9 to 15 min. The antioxidant activity of the different extracts is determined by means of an in vitro assay using a free radical method. Moreover, a new and fast method is developed using micellar electrokinetic chromatography with diode array detection (MEKC-DAD) to provide a preliminary analysis on the composition of the extracts. This combined application (i.e., in vitro assays plus MEKC-DAD) allowed the fast characterization of the extracts based on their antioxidant activity and the UV-vis spectra of the different compounds found in the extracts. To our knowledge, this work shows for the first time the great possibilities of the combined use of PLE-in vitro assay-MEKC-DAD to investigate natural sources of antioxidants.     

Two problematic human polymorphic Alu insertions

Analysis of two previously described polymorphic Alu insertions (Sb19.3 and NBC3) in world-wide human populations generated genotypic frequencies grossly in violation of Hardy-Weinberg equilibrium expectations. GenBank searches at the National Center for Biotechnology Information (NCBI) and sequencing analyses revealed that samples homozygous for the Sb19.3 Alu insertion amplify a band indistinguishable in size to the lack of insertion amplicon, corresponding to a paralogous locus on chromosome 4. This locus displays a very similar sequence (84%) to that flanking the Sb19.3 Alu insertion located at chromosome 19. Moreover, we have determined that NBC3, a different Alu insertion, is not located in the pseudoautosomal region of the Y-chromosome, as previously reported, but in position Yq11.2. Also, the band that mimics the lack of insertion amplicon corresponds to a paralogous locus located at chromosome X with a similarity of 92% to the sequence flanking the NBC3 Alu insertion. Finally, the utilization of newly designed primers avoided amplification from the paralogous loci and allowed a reliable assignation of genotypes for both loci. Unlike previously reported, using our new primers the Y-specific locus NBC3 was found not to be polymorphic in the populations analyzed.     

Fluorometric sensors based on chemically modified enzymes Glucose determination in drinks

In this paper an enzymatic fluorometric sensor for glucose determination in drinks is presented. The sensor film was obtained by immobilisation of glucose oxidase chemically modified with a fluorescein derivative (GOx-FS) in a polyacrylamide polymer. During the enzymatic reaction the changes in the fluorescence intensity of the GOx-FS are related to the glucose concentration. Working in FIA mode, the optimum conditions found were: 0.7 ml min(-1) flow rate, 300 mul sample injection and pH 6.5. The sensor responds to glucose concentrations ranging from 400 to 2000 mg l(-1), the reproducibility is around 3% and the life-time is at least 3 months (more than 350 measurements). The sensor was applied to direct glucose determination in drinks with good accuracy; interference caused by the filter effect was avoided by the kinetics of the reaction.     

A Preprocessing Perspective for Quantum Machine Learning Classification Advantage in Finance Using NISQ Algorithms

Quantum Machine Learning (QML) has not yet demonstrated extensively and clearly its advantages compared to the classical machine learning approach. So far, there are only specific cases where some quantum-inspired techniques have achieved small incremental advantages, and a few experimental cases in hybrid quantum computing are promising, considering a mid-term future (not taking into account the achievements purely associated with optimization using quantum-classical algorithms). The current quantum computers are noisy and have few qubits to test, making it difficult to demonstrate the current and potential quantum advantage of QML methods. This study shows that we can achieve better classical encoding and performance of quantum classifiers by using Linear Discriminant Analysis (LDA) during the data preprocessing step. As a result, the Variational Quantum Algorithm (VQA) shows a gain of performance in balanced accuracy with the LDA technique and outperforms baseline classical classifiers.