Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

Preparation and electrochemical behavior of ordered rh adlayers on Pt(100) electrodes

Rhodium adlayers on Pt(100) substrates have been prepared by electrodeposition from dilute Rh(III) acidic solutions. The initially disordered layer is electrochemically annealed by applying a polarization program consisting of high-sweep-rate multicycle sequences between 0.05 and 0.78 V(RHE) in 0.1 M H(2)SO(4). In this way, a pseudomorphic Rh monolayer can be prepared on Pt(100) substrates. The degree of order of the electrochemically annealed layer has been evidenced not only through voltammetric experiments but also by means of scanning tunneling microscopy with atomic resolution for iodine-protected adlayers, which show a c(2 x 2) structure. The electrochemically induced ordering of the Rh adlayer appears to be a consequence of the repeated cycles of adsorption/desorption of H and, especially, oxygenated species. Voltammetry in sulfuric acid solutions permits examination of the energetics of H/anions and OH/O adsorption as a function of the Rh coverage. The first monolayer adsorbs both hydrogen and oxygenated species more strongly than the second one. This can be explained through an electronic effect caused by the underlying Pt(100) substrate.     

Proton nuclear magnetic resonance characterisation of glycosaminoglycans using chemometric techniques

Various types of glycosaminoglycans (GAGs) including heparins, chondroitin sulfates, dermatan sulfate and hyaluronic acid were studied from their proton nuclear magnetic resonance (1H NMR) spectra using chemometric techniques. Despite the complexity of the 1H NMR signals, data analysis using principal component analysis enabled the different GAG classes to be distinguished and permitted their classification according to their chemical structure. The analysis of the composition of the major disaccharide unit and other relevant chemical structures in the heparin samples was performed using partial least squares regression.     

Losartan potassium,a non‐peptide agent for the treatment of arterial hypertension

In the title compound, potassium 2‐butyl‐4‐chloro‐1‐{[2′‐(5‐tetrazolido)­bi­phenyl‐4‐yl]­methyl}‐1H‐imidazol‐5‐yl­methanol, K⁺·C₂₂H₂₂ClN₆O^?, the imidazole and tetrazole rings are at angles of 85.0 (2) and 51.8 (1)°, respectively, to the phenyl rings to which they are attached, while the dihedral angle between the latter two rings is 46.7 (1)°. The coordination sphere of the metal cation consists of six tetrazoyl N atoms, the methanol O atom and the π cloud of one of the phenyl rings. These interactions determine the formation of columns of molecular anions that lie parallel to the b axis, while hydrogen bonding contributes to intercolumnar cohesion. Far from the centre of the columns, the hydro­carbon chain is immersed in a hydro­phobic environment.     

Inorganic-metalorganic hybrids based on copper(II)-monosubstituted Keggin polyanions and dinuclear copper(II)-oxalate complexes. Synthesis, X-ray structural characterization, and magnetic properties

Reaction of in situ generated copper(II)-monosubstituted Keggin polyoxometalates and copper(II)-bipyridine-oxalate complexes in the corresponding alkaline acetate buffer led to the formation of hybrid metal organic-inorganic compounds K(2)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(H(2)O)(2)(mu-ox)}(2)].14H(2)O (1), K(14)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}](2)[SiW(11)O(39)Cu(H(2)O)].55H(2)O (2), (NH(4))(4)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}].10H(2)O (3), and Rb(4)[{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}].10H(2)O (4). Their structures have been established by single-crystal X-ray diffraction. The main structural feature of these compounds is the presence of copper(II)-monosubstituted alpha-Keggin polyoxoanions as inorganic building blocks, on which the mu-oxalatodicopper metalorganic blocks are supported. Compound 1contains the discrete hybrid polyanion [{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(H(2)O)(2)(mu-ox)}(2)](2)(-), whereas the polymeric hybrid polyanion [{SiW(11)O(39)Cu(H(2)O)}{Cu(2)(bpy)(2)(mu-ox)}(2)](n)(4)(n)(-) gives a monodimensional character to compounds 2-4. Magnetic and EPR results are discussed with respect to the crystal structure of the compounds. DFT calculations on both the [Cu(2)(bpy)(2)(H(2)O)(4)(mu-ox)](2+) cationic complex and the metalorganic blocks have been performed in order to determine the optimized geometry and the magnetic coupling constants, respectively.     

Determination of propazine by differential pulse polarography in micellar and emulsified media

An electroanalytical study of the herbicide propazine's reduction process in micellar solutions and oil-in-water emulsions is reported. The anionic surfactant sodium pentanesulphonate was chosen as the most suitable. The differential pulse polarograms of micellar solutions had two reduction peaks below pH 2.0, whereas only one peak was obtained above pH 2.O. Ethyl acetate was chosen as the organic solvent to form propazine emulsions. Unlike in micellar solutions, the DPP polarograms of propazine emulsions showed only one peak even at pH < 2.0, suggesting that propazine hydrolysis was hindered in the emulsified medium. The limiting current is diffusion-controlled and the electrode process is irreversible. Propazine can be determined by differential pulse polarography over the 1.0 × 10^–1 – 1.0 × 10^–1moll^–1 and 1.0 × 10^–15 – 4.0 × 10^–1 moll^–1 concentration ranges and the limit of detection was 2.8 × 10^–1 moll^–1. Of the potential interferents simazine, methoprotryne and terbutryn (alls-triazines), thiram (a dithiocarbamate), dinoseb (nitrophenolic), and heptachlor (chlorinated cyclo-diene herbicide), only the first two were significant (10% error for equimolar concentrations). The method was applied to the determination of propazine in spiked drinking water. At a concentration level of 2.0 × 10^–1 moll^–1 a recovery of 94 ± 6% was obtained, after tenfold concentration on Sep-Pak.     

Mössbauer studies on one-dimensional iron phthalocyanines

Summary Magnetic moments and⁵⁷Fe Mössbauer spectra at room temperature and at liquid nitrogen temperature of polynuclear ligand-bridged iron phthalocyanines, FePcL (L = pyrazine and 4,4-bipyridyl), are reported. The experimental data are in agreement with a pseudo-octahedral environment around the iron(II) cation. Partially oxidized derivatives, FePc(pz)I_0.26 and FePc(bipy)I_1.06 have been synthesized and their⁵⁷Fe Mössbauer spectra and magnetic moments within the same temperature range obtained. Oxidation is shown to be metal centred and the iodine is found to be in I^– form for FePc(pz)_0.26 and as both I^– and I ₃ ^– species for FePc(bipy)I_1.06. While the magnetic moment of FePc(pz) increases upon oxidation, the opposite occurs for FePc(bipy).     

Accurate intermolecular ground state potential of the Ar-N2 van der Waals complex

After carrying out a systematic basis set convergence study, we evaluate several ground state potential energy surfaces of the Ar-N(2) van der Waals complex at the coupled cluster singles and doubles model including connected triples corrections. We use the aug-cc-pVXZ (X=5,Q,D) and the daug-cc-pVQZ basis sets augmented with a set of 3s3p2d1f1g (denoted 33211) and 3s3p2d2f1g (denoted 33221) midbond functions, respectively. aug-cc-pVTZ-33211 results were available in the literature. The aug-cc-pV5Z-33211 (daug-cc-pVQZ-33221) surface is characterized by a T-shaped minimum at R(e)=3.709 (3.701) A and of 99.01 (102.50) cm(-1), and a linear saddle point at 4.260 (4.257) A and D(e)=75.28 (79.73) cm(-1). These results are compared with the values provided by the semiempirical potentials available, and those of previous theoretical studies. The basis set convergence of the intermolecular potentials is also analyzed. From the potentials the rovibronic spectroscopic properties are determined. We study the basis set convergence of the rotational frequencies. The binding parameters that characterized the aug-cc-pVTZ-33211 surface are reasonable, but the surface is not good enough to evaluate the microwave spectra. The aug-cc-pVQZ-33211 basis set results considerably improve the triple zeta and are close to the aug-cc-pV5Z-33211. Considering the small differences between the quadruple and the quintuple zeta surfaces, the latter results can be expected to be close to convergence. At this level the differences with respect to the accurate experimental frequencies are in the order of 0.7%. In the case of the daug-cc-pVXZ-33211,33221 (X=5,Q,T,D) series, the convergence of the interaction energies with respect to basis set improvement is not so smooth. The errors in the frequencies obtained with the daug-cc-pVQZ-33221 basis set with respect to experiment are in the order of 0.4%.     

Theoretical study of alkyl-pi and aryl-pi interactions. Reconciling theory and experiment

Quantum mechanical and quantum mechanical/molecular mechanical calculations in conjunction with continuum solvation models have been used to analyze CH-pi interactions in model systems of aryl- and alkyl-aromatic interactions, as well as in a model folding system designed to study those interactions. High level calculations reproduced accurately the interaction of CH-pi interactions in both alkyl- and aryl-based model systems. Dispersion effects dominate the interaction, but the electrostatics term is also relevant for aryl CH-pi interactions. Theoretical calculations were also used to examine the influence of CH-pi interactions in determining the conformational flexibility of folding models. Finally, a critical comparison of the results obtained from high level calculations on model systems and the experimental data derived for folding models in apolar solvents was carried out, which allowed us to reconcile the apparent discrepancy found between both data.