Simultaneous determination of arsenic, antimony and selenium by gas-phase diode array molecular absorption spectrometry, after preconcentration in a cryogenic trap

This paper describes a method for the simultaneous determination of As(III), Sb(III) and Se(IV) by combining hydride generation and gas phase molecular absorption spectrometry. A system for continuous hydride generation has been designed and developed, based on the use of a double process of gas-liquid separation, and optimal compromise operation conditions for the three compounds have been found. After generation, the hydrides are collected in a liquid nitrogen cryogenic trap, and then evaporated and driven to the flow cell of a diode array spectrophotometer, in which the transient signals over the 190–250 nm wavelength interval are measured. Under the recommended conditions (sample flow: 35 ml min⁻¹, 0.5 M HCl; reductor flow: 4 ml min⁻¹ of 4% NaBH₄, solution) linear response ranges above 50 μg 1⁻¹ for As(III), 30 μg 1⁻¹ for Sb(III) and 200 μg 1⁻¹ for Se(IV) are obtained with detection limits of 22 μg 1⁻¹, 15 μg 1⁻¹ and 65 μg 1⁻¹, respectively. Multiwavelength linear regression equations were used for the simultaneous determination of the three elements in different synthetic samples, with good precision and accuracy and to study simultaneously the interference from different chemical species for the three compounds. Results were similar to those obtained by other techniques using hydride generation.     

A convenient synthesis of novel pyrido(1′,2′:1,2)imidazo[5,4‐d]‐1,2,3‐triazinones from imidazo[1,2‐a]pyridines

The imidazo[1,2‐a]pyridine system was investigated as a synthon for the building of very attractive fused triazines, a planar, angular tri‐heterocycle with potential biological activity. Thus ethyl 3‐nitroimidazo[1,2‐a]pyridine‐2‐carboxylate was treated with ammonia or with an excess of primary amines to generate the corresponding substituted nitro carboxamidoimidazopyridines. The nitro substituent in the latter products, was reduced to yield 3‐amino‐2‐carboxamidoimidazo[1,2‐a]pyridine derivatives, which in turn were treated with nitrous acid to furnish 1‐oxo‐2‐substituted pyrido(1′,2′:1,2)imidazo[5,4‐d]‐1,2,3‐triazines.     

Electrical conductivities of halide salts in aqueous formamide solutions

The electrical conductivities of sodium chloride and sodium iodide solutions in formamide-water mixtures of different composition have been measured at 25°C. From these data, the limiting equivalent conductances for these salts have been determined. The correspondingWalden products are compared together with the one reported for sodium bromide in the same solvent mixtures, and they are analysed as functions of the anion size. Further, the limiting ionic equivalent conductances are estimated for the different ions. The variation of the ionicWalden products with solvent composition is discussed in terms of ionic solvation and solvent structure.

---

Elektrische Leitfähigkeit von Halogensalzen in wäßrigen Formamid-Lösungen

Zusammenfassung Es wurden die elektrischen Leitfähigkeiten von Natriumchlorid- und Natriumjodidlösungen in Formamid-Wasser-Mischungen verschiedener Zusammensetzung bei 25°C gemessen. Aus diesen Daten wurden die Grenzäquivalenzleitfähigkeiten für diese Salze bestimmt. Die entsprechendenWalden-Produkte wurden mit den für Natriumbromid in den gleichen Lösungsmittelgemischen berichteten verglichen und hinsichtlich der Anionengrößen analysiert. Außerdem wurden die ionischen Grenzäquivalenzleitfähigkeiten für die einzelnen Ionen abgeschätzt. Die Variation der ionischenWalden-Produkte mit der Lösungsmittelzusammensetzung wurde bezüglich Ionensolvatation und Lösungsmittelstruktur diskutiert.

     

Organocatalytic ring expansion of beta-lactams to gamma-lactams through a novel N1-C4 bond cleavage. direct synthesis of enantiopure succinimide derivatives

Tetrabutylammonium cyanide (20 mol %) catalyzes ring expansion of 4-(arylimino)methylazetidin-2-ones 2 to 5-aryliminopyrrolidin-2-ones 3 through a novel N1-C4 bond cleavage of the beta-lactam nucleus. New, efficient one-pot protocols to enantiopure succinimide derivatives 3 and 4 from beta-lactam aldehydes 1 have also been developed. [reaction: see text]     

Accurate intermolecular ground state potential of the Ne-HCl van der Waals complex

From an accurate ground state intermolecular potential energy surface we evaluate the rovibrational spectrum of the Ne-HCl van der Waals complex. The intermolecular potential is obtained by fitting a considerable number of interaction energies obtained at the coupled cluster singles and doubles including connected triple excitations level and with the augmented correlation consistent polarized valence quintuple zeta basis set extended with a set of 3s3p2d1f1g midbond functions. This basis set is selected after a systematic basis set study carried out at geometries close to those of the three main surface stationary points. The surface is characterized by two linear minima, i.e. Ne-ClH and Ne-HCl, with distances from the Ne atom to the HCl center of mass of 3.398 and 3.833 angstroms, respectively; and binding energies of -65.10 and -66.85 cm(-1), respectively. These results agree well with the experimental data available in contrast to previous theoretical results. The rovibrational spectra calculated for the different isotopic species are also compared to the experiments.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

The reactant state for substrate-activated turnover of acetylthiocholine by butyrylcholinesterase is a tetrahedral intermediate

Secondary beta-deuterium kinetic isotope effects have been measured as a function of substrate concentration for recombinant human butyrylcholinesterase-catalyzed hydrolysis of acetyl-L3-thiocholine (L = 1H or 2H). The isotope effect on V/K is inverse, D3V/K = 0.93 +/- 0.03, which is consistent with conversion of the sp2 hybridized carbonyl carbon of the scissile ester bond of the E + A reactant state to a quasi-tetrahedral structure in the acylation transition state. In contrast, the isotope effect on Vmax under conditions of substrate activation is markedly normal, D3(betaVmax) = 1.29 +/- 0.06, an observation that is consistent with accumulation of a tetrahedral intermediate as the reactant state for catalytic turnover. Generally, tetrahedral intermediates for nonenzymatic ester hydrolyses are high-energy steady-state intermediates. Apparently, butyrylcholinesterase displays an unusual ability to stabilize such intermediates. Hence, the catalytic power of cholinesterases can largely be understood in terms of their ability to stabilize tetrahedral intermediates in the multistep reaction mechanism.     

Changes in the reactivity of the fluorescent reagents carbazole-9-carbonyl chloride and 9-carbazolylacetic acid in the presence of cyclodextrins

Carbazole-9-carbonyl chloride (C9CC) and 9-carbazolylacetic acid (9CAA) were selected as model fluorescent reagents. The effect of different chemically modified cyclodextrins (CDs) added to the aqueous solutions of these reagents was studied in water and in buffered aqueous solutions at pH 4.5 and 8.8. The CDs employed were 2-hydroxypropyl-β-cyclodextrin (HP-βCD), 2,3-di-O-methyl-β-cyclodextrin (DM-βCD) and 2,3,6-tri-O-methyl-β-cyclodextrin (TM-βCD). The inclusion of these reagents inside the cavities of the CDs was verified and this process can affect the derivatization reaction because CDs can modify the reactivity of the guest molecules. The basic conditions necessary for the derivatization reaction between C9CC and amines lead to the formation of carbazole anion through hydrolysis followed by decarboxylation. In the presence of CDs, the hydrolysis-decarboxylation of carbazole-9-carbonyl chloride is faster than in buffered aqueous homogeneous solutions. The behaviour observed for these reagents in aqueous solutions of CDs was compared to the one observed in basic ethanolic solutions. These changes are particularly noticeable in the case of 2,3-di-O-methyl-β-CD and 2-hydroxypropyl-β-CD. The characteristics of the fluorescent reagents are compared to carbazole and 9-methylcarbazole as model compounds. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May 14–17, 2006.     

31P{1H}-n.m.r. as a tool for identification of ruthenium isomers containing PPh3 or 1,4-bis(diphenylphosphino)butane ligands. X-ray structures of the cis-{RuCl2(PPh3)2 [4,4′-(-X)2-2,2′-bipy]} complexes [X=-H, -Me, -SMe and (-Cl, -Me)]

A series of cis-{RuCl₂(PPh₃)₂[4,4-(X)₂-2,2-bipy]} [cis-chlorines; X=-H, -Me, -SMe, and (-Cl,-Me)] complexes have had their structures determined by single crystal X-ray diffraction. The geometry of these complexes, also determined in CH₂Cl₂ solution by ³¹P{¹H}-n.m.r. spectroscopy, showed that the chemical shifts for the phosphorus atoms are slightly dependent on the pKa of the 4,4-(-X)₂-2,2-bipy ligands.     

Electrochemistry of vanadium-doped tetragonal and monoclinic ZrO2 attached to graphite/polyester composite electrodes

The electrochemistry of monoclinic and tetragonal vanadium-doped zirconias (VZrO₂), prepared from gel precursors with vanadium loadings ranging from 0.5 to 15 mol%, has been studied using abrasive-conditioned graphite/polyester composite electrodes immersed in aqueous HCl and HClO₄ solutions. Isolated vanadium centers form a solid solution in the zirconia lattice with a solubility limit close to 5 mol%. Above 5 mol%, finely dispersed V₂O₅ is formed. Vanadium centers located at the boundary sites of the zirconia lattice display successive one-electron transfer processes near to +0.25 and +0.10 V vs. SCE, whereas finely dispersed V₂O₅ yields three successive reduction processes at +0.46, +0.30, and +0.16 V vs. SCE. Electrochemical data indicate the presence of both V⁵⁺ and V⁴⁺ centers in the lattice of monoclinic and tetragonal zirconias, the V⁵⁺/V⁴⁺ ratio decreasing as the vanadium loading increases. Electronic Publication