Superconductivity and resistance behaviour of σ-phase alloys: Nb−Rh and Ta−Rh

Superconductivity, structure and electrical resistance behaviour of -phase alloys of Nb–Rh and Ta–Rh are investigated. The Ta–Rh alloys do not become superconducting above 1.2 K. The andH _c2 (0) values of a homogeneous alloy with the composition Nb_65.2Rh_34.8 are 2.95 K, 13.9 kG/K and 23 kG, respectively, whereas for an inhomogeneous alloy with the composition Nb_63.7Rh_36.3 these values are 4.24 K, 5.5 kG/K and 14 kG, respectively. Splat quenching results in a substantial increase in the andH _c2 (0) values of the Rh-rich sample. Annealing (900°C, 100 h) of the Rh-rich sample leads only to small changes in the superconducting properties but a small amount of Nb–Rh solid solution has been formed. The electrical resistance of Nb_65.2Rh_34.8 decreases with decreasing temperature and varies asT ^0.5 between 150 and 240 K and asT between 60 and 140 K. For Ta_70.0Rh_30.0 the temperature coefficient changes to negative values below 170K. values are calculated for Nb–Rh using McMillan's formula. An estimatedT _c value of Ta–Rh is 0.2 K. TheH _c2 (0) values of Nb–Rh are in good agreement with the theoreticalH _c ^2** (0) values.Dedicated to Prof. Dr. W. Buckel on the occasion of his 60th birthday     

Theβ-decay of100Y: Discovery of a very low lying 0+ state in100Zr

Theβ-decay of¹⁰⁰Y has been investigated at the gas filled recoil separator JOSEF by means ofγ-ray and conversion electron spectroscopy. Twoβ-decay modes, of half lives 0.94±0.03 s and 0.55±0.15 s, have been observed. Using Xγ-, Xce-, γγ- andγce-coincidences the level scheme of¹⁰⁰Zr has been constructed. An excited 0 ₂ ⁺ state at 331.3 keV has been discovered in this nucleus. Theβ-decay from the 0.55 s decay mode in¹⁰⁰Y shows a strong preference for the ground state compared to the 0 ₂ ⁺ state in¹⁰⁰Zr. The structure of¹⁰⁰Zr and the nature of the 0 ₂ ⁺ level is discussed in the light of the present results.     

Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

The α‐ and β‐epoxides of 3β‐acet­oxy‐5α‐lanost‐9(11)‐en‐7‐one

The structures of 3β‐acet­oxy‐9α,11α‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one and 3β‐acet­oxy‐9β,11β‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one, C₃₂H₅₂O₄, differ in their respective substituted cyclo­hexa­none rings but adopt similar conformations in the other three rings. In both of the crystal structures, weak inter­molecular C—H⋯O inter­actions are present.     

Multielectron atom transfer reactions of perchlorate and other substrates catalyzed by rhenium oxazoline and thiazoline complexes: reaction kinetics, mechanisms, and density functional theory calculations

The title complexes, the Re(O)L(2)(Solv)(+) complexes (L = hoz, 2-(2'-hydroxyphenyl)-2-oxazoline(-) or thoz, 2-(2'-hydroxyphenyl)-2-thiazoline(-); Solv = H(2)O or CH(3)CN), are effective catalysts for the following fundamental oxo transfer reaction between closed shell molecules: XO + Y --> X + YO. Among suitable oxygen acceptors (Y's) are organic thioethers and phosphines, and among suitable oxo donors (XO's) are pyridine N-oxide (PyO), t-BuOOH, and inorganic oxyanions. One of the remarkable features of these catalysts is their high kinetic competency in effecting perchlorate reduction by pure atom transfer. Oxo transfer to rhenium(V) proceeds cleanly to afford the cationic dioxorhenium(VII) complex Re(O)(2)L(2)(+) in a two-step mechanism, rapid substrate (XO) coordination to give the precursor adduct cis-Re(V)(O)(OX)L(2)(+) followed by oxygen atom transfer (OAT) as the rate determining step. Electronic variations with PyO derivatives demonstrated that electron-withdrawing substituents accelerate the rate of Re(VII)(O)(2)L(2)(+) formation from the precursor adduct cis-Re(V)(O)(OX)L(2)(+). The activation parameters for OAT with picoline N-oxide and chlorate have been measured; the entropic barrier to oxo transfer is essentially zero. The potential energy surface for the reaction of Re(O)(hoz)(2)(OH(2))(+) with PyO was defined, and all pertinent intermediates and transition states along the reaction pathway were located by density functional theory (DFT) calculations (B3LYP/6-31G). In the second half of the catalytic cycle, Re(O)(2)L(2)(+) reacts with oxygen acceptors (Y's) in second-order reactions with associative transition states. The rate of OAT to substrates spans a remarkable range of 0.1-10(6) L mol(-)(1) s(-)(1), and the substrate reactivity order is Ph(3)P > dialkyl sulfides > alkyl aryl sulfides > Ph(2)S approximately DMSO, which demonstrates electrophilic oxo transfer. Competing deactivation and inhibitory pathways as well as their relevant kinetics are also reported.     

A new access to polyhydroxy piperidines of the azasugar class: synthesis and glycosidase inhibition studies

A new synthetic strategy has been devised to access a variety of polyhydroxylated piperidines belonging to the azasugar class of glycosidase inhibitors. The key precursor (3aR, 7aR)-5-benzyl-2,2-dimethyl-7-methylenehexahydro[1,3]dioxo[4,5-c]pyridine is obtained by photoinduced electron transfer (PET) cyclization of the corresponding alpha-trimethylsilylmethylamine radical cation to the tethered acetylene functionality. The new molecules have been evaluated for inhibitory properties for certain beta-glycosidases and have been found to be moderate to weak inhibitors of the enzymes under study.     

Synthesis and pharmacological activity of 4-(4'-(chlorophenyl)-4-hydroxypiperidine) derivatives

A new series of 4-(4'-chlorophenyl)-4-hydroxypiperidine derivatives (2-5), substituted at nitrogen, were synthesized and tested as potential analgesic compounds as well as evaluated for their effect on hypotensive activity. Results showed that all the derivatives exhibit significant analgesic activity in male Wistar rats at a dose of 50 mg/kg of body weight after intramuscular injection, when tested by thermal stimuli (tail flick test). Pethidine was used as reference drug. Compounds 2, 3 and 5 produced reduction in blood pressure in normotensive rat.     

Organotin(IV) derivatives as biocides: An investigation of structure by IR, solution NMR, electron impact MS and assessment of structure correlation with biocidal activity

A brief account is given of the synthesis, structural chemistry and the antibacterial, antifungal and cytotoxic effects of organotin complexes of 2-[(2,4-dichloroanilinocarbonyl)]benzoic acid. The unimolar and bimolar substitution products have been characterized by elemental analysis and spectral studies, including IR, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR, and mass spectra. The data support the binding of the oxygen atom to the tin atom in [R₂Sn(OOCR’)₂] and [R₃Sn(OOCR’)] (R = Me, Bu, and Ph, R’ = 2-[(2,4-dichloroanilinocarbonyl)]benzoic acid). Based on these studies, with a coordination number of four, a distorted tetrahedral geometry has been proposed for the resulting derivatives in solution. The free ligand (R’/COOH) and its respective tin complexes were tested in vitro against a number of microorganisms to assess their biocidal properties and to correlate them with the structures of the derivatives.     

Oxidation of triethylamine by molecular oxygen catalyzed by Ru(III)-ion

The kinetics of Ru(III) catalyzed oxidation of triethylamine by molecular oxygen has been investigated in the pH range 1.5 to 2.5 at 35°C and I=0.1 M KCl. The reaction is first order with respect to substrate, catalyst and molecular oxygen concentrations. The rate of the reaction increases with the increase of pH from 1.5 to 2.5 and then there is a slight decrease in the rate above pH 2.5. Based on the kinetic data, a mechanism for the catalytic oxidation of triethylamine is proposed. The major products in the oxidation of triethylamine are the N-oxide, diethylamine and acetaldehyde.

---

, Ru(III), pH=1,5+2,5 35°C I=0,1M KCl. , . pH 1,5 2,5, pH 2,5. , . N-, .