Synthesis of 2-arylbenzimidazoles catalyzed by transition metal nitrates

A simple and practical procedure for synthesis of 2-arylbenzimidazoles by a one-pot condensation of o-phenylenediamine with aromatic aldehydes in the presence of a catalytic amount of M(NO₃)₂·6H₂O (M = Mn, Fe, Co, Ni, Cu) in ethanol at room temperature is described. Major advantages of this practical procedure are use of a readily available catalyst, high yields, short reaction times, and simplicity of the reaction and workup.     

Structural, theoretical and multinuclear NMR study of mercury(II) complexes with a new ambidentate phosphorus ylide

The reaction of the new ambidentate ylide, Ph₃PCHCOCH₂COOC₂H₅ (EAPPY), with HgX₂ (X = Cl, Br and I) in equimolar ratios using methanol as the solvent leads to binuclear complexes of the type [EAPPY·HgX₂]₂ (X = Cl (1), Br (2) and I (3)). Single crystal X-ray analysis reveals the presence of a centrosymmetric dimeric structure containing the ylide and HgX₂ (X = Br or I)_. The IR and NMR data of the product [(EAPPY)·HgCl₂]₂ (1), formed by the reaction of mercury(II) chloride with the same ylide, are similar to those of 2 and 3. Analytical data indicate a 1:1 stoichiometry between the ylide and Hg(II) halide in each of the three products. Theoretical studies indicate that the nature of the R group in ylides of the type Ph₃PCHCOR has a weak effect on the Hg-C(ylide) bond length in binuclear Hg₂L₂I₄ complexes.     

Second law of thermodynamics analysis for nanofluid turbulent flow inside a solar heater with the ribbed absorber plate

Journal of Thermal Analysis and Calorimetry - Employing rough surfaces and nanofluids in solar heater ducts are recognized as effective techniques to improve thermal performances of these devices....     

Starch nanoparticles as a bio-nanocatalyst in synthesis of diheteroaryl thioethers

Nanostarch is shown to be a highly efficient, eco-friendly and heterogenous organocatalyst for the synthesis of the diheteroaryl thioethers via one-pot reaction of methylcarbonyls, thiourea and iodine in DMSO. This method offers significant advantages such as available starting materials, higher purity and excellent yield of products, very easy reaction conditions and absence of any tedious purification. Furthermore, because of employing eco-friendly catalyst without using transition metal catalysts, this novel method emerges as a green-approach leading to less harmful residues. Moreover, a mechanism was proposed to rationalize the reaction and the role of starch nanoparticles was also investigated in these transformations.     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Fast and Efficient Nitration of Salicylic Acid and Some Other Aromatic Compounds over H_3PO_4/TiO_2-ZrO_2 Using Nitric Acid

TiO₂‐ZrO₂ (1/1)‐surf with Ti and Zr molar ratio of 1/1 was prepared with surfactant through a sol‐gel method. The optimum experimental condition was investigated for nitration of salicylic acid. Then, a number of nitration reactions were carried out with a variety of aromatic compounds in the optimum condition. The 25 wt% H₃PO₄/TiO₂‐ZrO₂ (1/1)‐surf catalyst showed good selectivity and yield in a short time for the nitration of salicylic acid and some other aromatic compounds.     

An efficient chemoselective synthesis of O-vinylaryl systems using acetylenic esters and dihydroxybenzenes in the presence of triphenylphosphine or alkyl isocyanides

<正>The addition of 2,4-dihydroxyaceto(and benzo)phenone to propiolic ester is catalyzed by triphenylphosphine or tert-butyl isocyanide to form O-vinyl aryl derivatives in fairly good yields.     

Preparation and biological evaluation of radiogallium labeled glucagon for SPECT imaging

In this work, recently prepared ⁶⁷Ga-labeled glucagon (⁶⁷Ga-DTPA-GCG) for imaging studies (radiochemical purity >94%; HPLC, S.A. 296–370 GBq/mM) was used in biological studies. The wild-type rat biodistribution results, 2 h post injection, demonstrated high tissue:muscle ratios for target tissues (liver, kidney, heart, spleen, fat intestine stomach and pancreas), 234, 18.45, 7.12, 1.75, 128.7, 4.9, 6.3 and 1.11, respectively. The tracer binding capacity using freshly prepared rat brain homogenate demonstrated significant specific binding of the tracer to neuronal GCG receptors (⁶⁷Ga-DTPA-GCG/⁶⁷Ga:3 and ⁶⁷Ga-DTPA-GCG/⁶⁷GaDTPA:2.2 at 90 min). SPECT images also demonstrated target specific binding of the tracer at 4 h. The data suggests the tracer is accumulated in GCGR rich tissues 2–4 h post injection, suggesting potentials of the tracer for future imaging studies in glocagonoma models.     

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.     

Determination of the effective atomic and mass numbers for mixture and compound materials in high energy photon interactions

In consideration the radiological properties of materials and studying the scattering processes in atomic and nuclear physics, the effective atomic and mass numbers is widely employed. These numbers have been calculated for any mixed or composite materials in interaction with high energy photons (Linac in radiation therapy). A pair equation in terms of these numbers is obtained. The first equation has been derived from the conservation of mass energy law and the second by minimizing the binding energy from the semiempirical mass formula (Myers and Swiatecki formula) that gives a relation between atomic and mass numbers for stable nuclei approximately. By these equations one can obtain the effective atomic and mass numbers for any compound or mixed materials uniquely. These numbers are calculated for some materials and compared with the other studies.