Composition and in vitro antibacterial activity of essential oils from four Satureja species growing in Iran

The composition and in?vitro antibacterial activity of essential oils from four Satureja species (S. bachtiarica, S. khuzistanica, S. mutica and S. rechingeri) growing in Iran were determined. According to the results of GC-FID and GC-MS analysis, all oil samples were principally composed of phenolic constituents (carvacrol and/or thymol) with the percentages ranging from 41.2% (S. bachtiarica) to 77.7% (S. rechingeri). Determining antibacterial activities by the disc diffusion method against two Gram-positive and two Gram-negative bacteria revealed the maximum activity against Bacillus cereus with a range of minimum inhibitory concentration values from 0.25 to 1?mg?mL(-1) and minimum bactericidal concentration values from 0.5 to 1?mg?mL(-1). The oils of S. khuzistanica and S. rechingeri appeared to be more active in general than those of other species. In conclusion, the essential oils of studied Satureja species have the potential to be considered as alternatives for synthetic food preservatives.     

Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

Pd-poly(N-vinyl-2-pyrrolidone)/KIT-6 nanocomposite: Preparation,structural study,and catalytic activity

The Pd-poly(N-vinyl-2-pyrrolidone)/KIT-6 nanocomposite was prepared by an in situ polymerization method and used as an efficient heterogeneous catalyst for C–C bond formation through the Heck coupling reaction of aryl iodides, bromides and chlorides with styrene. The physical and chemical properties of the catalyst were characterized by XRD, BET, FT-IR, TGA, UV-Vis and TEM techniques. The reactions were performed in methanol-water as solvent and the products were obtained in high yield and purity after a simple work-up. The stability of the nanocomposite catalyst was excellent and could be reused 8 times without much loss of activity in the Heck coupling reaction.     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Decoration of multi-walled carbon nanotubes with NiO nanoparticles and investigation on their catalytic activity to synthesize pyrimidinone heterocycles

A supported carbon material is shown to be a highly efficient, eco-friendly and recyclable solid acid catalyst for the Biginelli reaction of aldehyde, β-ketoester and urea or thiourea under microwave irradiation in the absence of solvent. This method offers significant advantages such as efficiency, the excellent yield, avoidance of the organic solvents, mild reaction conditions, easy separation and simple operation. In addition, because of employing microwave as heating source and reducing use of organic solvents, this novel method emerges as a green-approach leading to less harmful residues. Furthermore, a mechanism was proposed to rationalize the reaction and the role of NiO–MWCNTs was also investigated in these transformations.     

l‐Proline‐functionalized Fe3O4 nanoparticles as a novel magnetic chiral catalyst for the direct asymmetric Mannich reaction

l ‐Proline has been successfully anchored on the surface of magnetic nanoparticles and characterized using powder X‐ray diffraction, scanning electron microscopy, vibrating sample magnetometry and Fourier transform infrared spectroscopy. These nanoparticles as a chiral catalyst have been employed to promote the direct asymmetric Mannich reaction. The corresponding products are obtained in high yields with high level of diastereoselectivity (up to 99:1 dr) in the presence of Fe₃O₄– l ‐proline. Also this heterogeneous catalyst can be recovered easily and reused many times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Biginelli reaction for synthesis of novel trifluoromethyl derivatives of bis(tetrahydropyrimidinone)benzenes

A facile one-pot three-component condensation of terephthalic aldehyde with urea and fluorinated 1,3-dicarbonyl derivatives is developed using catalytic quantities of chlorotrimethylsilane at ambient temperature. As a consequence, efficient synthesis of novel trifluoromethyl derivatives of bis(tetrahydropyrimidinone)benzenes is observed within short time periods. The procedure is shown to be equally efficient when urea is replaced with thiourea or guanidine.     

KAl(SO4)2 · 12H2O (alum) a reusable catalyst for the synthesis of some 4-substituted coumarins via Pechmann reaction under solvent-free conditions

A simple, efficient, and practical procedure for the Pechmann condensation using KAl(SO₄)₂ · 12H₂O (alum) as a non-toxic, reusable, inexpensive, and easily available catalyst is described under solvent-free condition at 65°C. These improved reaction conditions allow the preparation of a wide variety of some new substituted coumarins in high yields (86–96%) and purity under mild reaction conditions. Compared to the classical Pechmann condensation, this new method consistently has the advantage of high yields. Correspondence: Ali A. Mohammadi, Department of Chemistry, Shahid Beheshti University, P.O. Box 19839-4716, Tehran, Iran.