Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Conductometric study of complex formation between benzylbisthiosemicarbazone and metal cations in acetonitrile,dimethylformamide, and their binary mixtures

We report on conductometric study of complexation between benzylbisthiosemicarbazone [(2E,2′E)-2,2′-(1,2-diphenylethane-1,2-diylidene)bis(hydrazine-1-carbothioamide)] with Zn²⁺, Cr³⁺, Co²⁺, and Ni²⁺ cations at different temperatures in acetonitrile-dimethylformamide binary solvents of varied composition. The equilibrium constant and standard thermodynamic parameters (Δ_c H ⁰ and Δ_c S ⁰) of the complexes formation have been determined and found to be dependent on the binary solvent composition, the metal ion nature, and temperature.     

Multiple functions of microfluidic platforms: Characterization and applications in tissue engineering and diagnosis of cancer

Microfluidic system, or lab-on-a-chip, has grown explosively. This system has been used in research for the first time and then entered in the clinical section. Due to economic reasons, this technique has been used for screening of laboratory and clinical indices. The microfluidic system solves some difficulties accompanied by clinical and biological applications. In this review, the interpretation and analysis of some recent developments in microfluidic systems in biomedical applications with more emphasis on tissue engineering and cancer will be discussed. Moreover, we try to discuss the features and functions of microfluidic systems.     

Overcoming acid–base copolymer neutralization using mesoporous carbon and its catalytic activity in the tandem deacetalization–Knoevenagel condensation reaction

Research on Chemical Intermediates - Acid–base copolymer materials are of considerable interest because of their fundamental implications for acid–base bifunctional catalysis...     

Adaptive fuzzy voltage-based backstepping tracking control for uncertain robotic manipulators subject to partial state constraints and input delay

Nonlinear Dynamics - The aim of this paper is to tackle the problem of adaptive fuzzy voltage-based tracking control for uncertain electrically driven robotic manipulators subject to input delay...     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method

In this paper, a lattice Boltzmann method is employed to simulate the conjugate radiation–forced convection heat transfer in a porous medium. The absorbing, emitting, and scattering phenomena are fully included in the model. The effects of different parameters of a silicon carbide porous medium including porosity, pore size, conduction–radiation ratio, extinction coefficient and kinematic viscosity ratio on the temperature and velocity distributions are investigated. The convergence times of modified and regular LBMs for this problem are 15 s and 94 s, respectively, indicating a considerable reduction in the solution time through using the modified LBM. Further, the thermal plume formed behind the porous cylinder elongates as the porosity and pore size increase. This result reveals that the thermal penetration of the porous cylinder increases with increasing the porosity and pore size. Finally, the mean temperature at the channel output increases by about 22% as the extinction coefficient of fluid increases in the range of 0–0.03.

     

Modification of an implicit approach based on nonstandard rules for structural dynamics analysis

The present study aims to modify a recently suggested implicit approach consisted of the approximate Euler method and closed-form exponential mapping (herein referred to as the Liu scheme) for the dynamic analysis of structures. Such modification has been developed based upon nonstandard rules. The equation of motion is formulated in the augmented dynamic space to apply the exponential mapping as a group preserving scheme. The formulation of the proposed method involves the hyperbolic sine and cosine functions. The method is therefore prone to divergence due to the behavior of the hyperbolic functions in structures with a high ratio of stiffness to mass. In the present study, to consider the properties of the structural equation into the formulation of the time step size and thereby avoid the divergence, a parameter, known as stability parameter, is thus derived from the exact solution of the equation of motion based on nonstandard rules. Embedding this parameter into the proposed method improves its stability. Afterward, for evaluating the performance of the proposed method, it is applied to several structures with different loading patterns while implemented in programing environment of the Matlab software. The results are compared to those of several commonly used numerical methods in structural applications. It is found that the proposed method has acceptable convergence and accuracy, and low time consumption compared to several commonly used methods. Furthermore, its stability is guaranteed by embedding the stability parameter into the proposed method.     

GA-based optimization of a MIMO ANC system considering coupling of secondary sources in a telephone kiosk

In this paper a multi-input, multi-output (MIMO) active noise control system with the aim of global reduction of broadband noise in a telephone kiosk is addressed. The model selected for this optimization problem is the acoustic environment of an enclosure taking into account the effect of coupling of secondary sources used for control purpose. This optimization involves finding the best locations for loudspeakers and microphones inside the enclosure as well as optimizing the control signals considering secondary source coupling.Previous results show that in order to be able to reduce acoustic noise globally inside the enclosure, the frequency range of 50-300 Hz must be selected for control purpose. The mean of acoustic potential energy of the enclosure, when excited in this frequency range, is adopted as a performance measure. This performance index is penalized with the power of the signal required to excite secondary loudspeakers, in order to avoid placements that may need high voltage power amplifier for a desired performance. To find the solution of this problem, i.e. the global minimum of the performance index, several genetic algorithms are proposed and compared. In order to attain the best achievable performance in reaching the global minimum, the parameters of these genetic algorithms are tuned, and used for optimization purpose. Numerical simulations of the acoustical potential energy as well as the sound pressure at different heights of the kiosk, when active noise control (ANC) system operates, confirm the optimality of the locations proposed by the genetic algorithm.     

B12N12纳米笼：潜在的二氧化氮检测传感器

利用密度泛函理论通过计算吸附能量、HOMO/LUMO能隙变化、电荷转移、结构扭曲等研究二氧化氮分子在B12N12纳米笼的吸附．此外,通过计算B₁₂N₁₂的电子结合能、Gibbs自由能、态密度和分子表面的静电势研究其稳定性和其它特性．B₁₂N₁₂纳米笼吸附二氧化氮显示三种构型．B₁₂N₁₂团簇的HOMO/LUMO能隙变化对二氧化氮分子的存在非常敏感,从自由团簇的6.84 eV降为NO₂/团簇稳定团簇的3.23 eV．团簇的导电性被极大地提高,表明B₁₂N₁₂纳米簇可能是潜在的二氧化氮气体分子检测传感器.