Quantification of fenoprofen in human plasma using UHPLC–tandem mass spectrometry for pharmacokinetic study in healthy subjects

A rapid, simple and sensitive ultra-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method has been developed to quantify fenoprofen, a nonsteroidal anti-inflammatory drug in human plasma for a pharmacokinetic study in healthy subjects. Owing to high levels of protein binding, protein precipitation followed by solid-phase extraction was employed for the extraction of fenoprofen and fenoprofen-d3 (used as internal standard) from 200 μL human plasma. Separation was performed on a BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column using methanol−0.2% acetic acid in water (75:25, v/v) under isocratic elution. Electrospray ionization was operated in the negative mode for sample ionization. Ion transitions used for quantification in the selected reaction monitoring mode were m/z 241/197 and m/z 244/200 for fenoprofen and fenoprofen-d3, respectively. Under the optimized conditions, fenoprofen showed excellent linearity in the concentration range 0.02–20 μg/mL (r² ≥ 0.9996), adequate sensitivity, favorable accuracy (96.4–103.7%) and precision (percentage coefficient of variation ≤4.3) with negligible matrix effect. The validated method was successfully applied to a pharmacokinetic study of fenoprofen in healthy subjects. The significant features of the method include higher sensitivity, small plasma volume for processing and a short analysis time.     

X-Ray Crystal Structure Analysis of Novel 6-Amino-3-Phenyl-4-(Pyridin-4-yl)-2,4-Dihydropyrano[2,3-c]pyrazole-5-Carbonitrile

Crystallography Reports - The communication deals with the eco-friendly synthesis and X-ray crystal structure of an organic carbonitrile, namely...     

Synthesis,Characterization, and Crystal Structure of [3,3':3',3'-Terindolin]-2'-One Bis(dimethyl Sulfoxide)

Crystallography Reports - The indole derivative [3,3':3',3''-terindolin]-2'-one bis(dimethyl sulfoxide), C24H17N3O ⋅ 2(C2H6OS) has been synthesized using green protocol in...     

An experimental investigation on heat transfer enhancement in circular jet impingement on hot surfaces by using Al2O3/water nano-fluids and aqueous high-alcohol surfactant solution

The present article reports the heat transfer characteristics of a vertical stainless steel foil of 0.15 mm thickness (SS304) by circular impinging jets of various fluids such as pure water, nano-fluids (Al₂O₃-water, ф = 0.15%, 0.6%), and aqueous high-alcohol surfactant (HAS, i.e., 2-ethyl-hexanol, 100–400 ppm) studied using an infrared thermal imaging camera (A655sc, FLIR System). The enhancement in the heat transfer rates for Al₂O₃-water nano-fluids with ф = 0.15%, ф = 0.60%, and aqueous surfactant solution (150ppm) is found to be 140%, 207%, and 117% higher compared to pure water results, respectively. The surface characteristics of the foil after jet impingement by various fluids are also studied using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and surface wettability.     

Surface wave second harmonic generation over a n-type semiconductor

The sharp gradient in the intensity of a surface wave over a simiconductor-vacuum interface gives rise to a strong ponderomotive force on electrons and thus generates a second harmonic wave. The power of the second harmonic shows a resonance at $\text{ω =}\text{ω}{}_{\mathrm{p}}\text{2}$ (ω and ω_p being the wave and plasma frequencies) and tends to a saturation value at very high values of ω_p.     

Performance of a 4×10 Gbit/s optical time domain multiplexed system using SMZ switching

Optical time division multiplexing (OTDM) is emerging and promising alternative for future high-speed photonic networks because of its ability to accommodate higher bit rate and flexible bandwidth. Among other factors the performance of an OTDM system largely depends upon the switching characteristics of a de-multiplexer (DEMUX). Symmetric Mach-Zehnder (SMZ) have been found to be most suitable than all the available de-multiplexing switches because of compact size, thermal stability, and low power operation. In this paper, we simulate four-channel OTDM systems (all channel multiplexer (MUX) and DEMUX) with a Mach-Zehnder modulator and SMZ DEMUX to investigate the impact of signal power, pulse width and control signal power on BER.     

Effect of ZnO on phase emergence, microstructure and surface modifications of calcium phosphosilicate glass/glass-ceramics having iron oxide

The effect of ZnO on phase emergence and microstructure properties of glass and glass-ceramics with composition 25SiO₂-50CaO-15P₂O₅-(10 − x)Fe₂O₃-xZnO (where x = 0, 2, 5, 7 mol%) has been studied. They have been characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Surface modifications of these glass-ceramics in simulated body fluid have been studied using Fourier transform infrared reflection spectroscopy (FTIR), XPS and SEM. Results have shown a decrease in the fraction of non-bridging oxygen with increase in zinc oxide content. Emergence of crystalline phases in glass-ceramics at different heat treatment temperatures was studied using XRD. When glass is heat treated at 800 °C calcium phosphate, hematite and magnetite are developed as major phases in the glass-ceramics samples with ZnO up to 5 mol%. In addition to these, calcium silicate (Ca₃Si₂O₇) phase is also observed when glass is heat treated at 1000 °C. The microstructure of the glass-ceramics heat treated at 800 °C exhibits the formation of nano-size (40-50 nm) grains. On heat treatment at 1000 °C crystallites grow to above 50 nm size and more than one phase are observed in the microstructure. The formation of thin flake-like structure with coarse particles is observed at high zinc oxide concentration (x = 7 mol%). In vitro studies have shown the surface modifications and formation of Ca-P-rich layer on the glass-ceramics when immersed in simulated body fluids (SBF) for different durations. The bioactive response was found to depend on ZnO content.     

Portfolio selection with a minimax measure in safety constraint

In this paper, we attempt to design a portfolio optimization model for investors who desire to minimize the variation around the mean return and at the same time wish to achieve better return than the worst possible return realization at every time point in a single period portfolio investment. The portfolio is to be selected from the risky assets in the equity market. Since the minimax portfolio optimization model provides us with the portfolio that maximizes (minimizes) the worst return (worst loss) realization in the investment horizon period, in order to safeguard the interest of investors, the optimal value of the minimax optimization model is used to design a constraint in the mean-absolute semideviation model. This constraint can be viewed as a safety strategy adopted by an investor. Thus, our proposed bi-objective linear programming model involves mean return as a reward and mean-absolute semideviation as a risk in the objective function and minimax as a safety constraint, which enables a trade off between return and risk with a fixed safety value. The efficient frontier of the model is generated using the augmented -constraint method on the GAMS software. We simultaneously solve the ratio optimization problem which maximizes the ratio of mean return over mean-absolute semideviation with same minimax value in the safety constraint. Subsequently, we choose two portfolios on the above generated efficient frontier such that the risk from one of them is less and the mean return from other portfolio is more than the respective quantities of the optimal portfolio from the ratio optimization model. Extensive computational results and in-sample and out-of-sample analysis are provided to compare the financial performance of the optimal portfolios selected by our proposed model with that of the optimal portfolios from the existing minimax and mean-absolute semideviation portfolio optimization models on real data from S&P CNX Nifty index.     

Study of effects of dopants on structure of vitreous semiconductors (GeSe3.5)100-xMx (M = Bi,Sb) using high pressure techniques

An investigation of the problem of controlled doping of amorphous chalcogenide semiconductors utilizing a Bridgman anvil high pressure technique, has been undertaken. Bulk amorphous semiconducting materials (GeSe_3.5)_100-x doped with M = Bi (x = 2, 4, 10) and M = Sb (x = 10) respectively are studied up to a pressure of 100 kbar down to liquid nitrogen temperature, with a view to observe the impurity induced modifications. Measurement of the electrical conductivity of the doped samples under quasi-hydrostatic pressure reveals that the pressure induced effects in lightly doped (2 at % Bi) and heavily doped (x = 4, 10) semiconductors are markedly different. The pressure effects in Sb-doped semiconductors are quite different from those in Bi-doped material.