Microwave spectra and structures of KrAuF, KrAgF, and KrAgBr; 83Kr nuclear quadrupole coupling and the nature of noble gas-noble metal halide bonding

Microwave spectra of the complexes KrAuF and KrAgBr have been measured for the first time using a cavity pulsed jet Fourier transform microwave spectrometer. The samples were prepared by laser ablation of the metal from its solid and allowing the resulting plasma to react with an appropriate precursor (Kr, plus SF6 or Br2) contained in the backing gas of the jet (usually Ar). Rotational constants; geometries; centrifugal distortion constants; vibration frequencies; and 197Au, 79Br, and 81Br nuclear quadrupole coupling constants have all been evaluated. The complexes are unusually rigid and have short Kr-Au and Kr-Ag bonds. The 197Au nuclear quadrupole coupling constant differs radically from its value in an AuF monomer. In addition 83Kr hyperfine structure has been measured for KrAuF and the previously reported complex KrAgF. The geometry of the latter has been reevaluated. Large values for the 83Kr nuclear quadrupole coupling constants have been found for both complexes. Both the 197Au and 83Kr hyperfine constants indicate a large reorganization of the electron distribution on complex formation. A thorough assessment of the nature of the noble gas-noble metal bonding in these and related complexes (NgMX; Ng is a noble gas, M is a noble metal, and X is a halogen) has been carried out. The bond lengths are compared with sums of standard atomic and ionic radii. Ab initio calculations have produced dissociation energies along with Mulliken populations and other data on the electron distributions in the complexes. The origins of the rigidity, dissociation energies, and nuclear quadrupole coupling constants are considered. It is concluded that there is strong evidence for weak noble gas-noble metal chemical bonding in the complexes.     

Vibrational spectrum, ab initio calculations, conformational equilibria and torsional modes of 1,3-dichloropropane

Ab initio calculations are reported for three of four possible conformers of 1,3-dichloropropane. The fourth conformer, with Cs symmetry, has a predicted enthalpy difference of more than 1500 cm(-1) from the most stable conformer from each calculation regardless of the basis set used, so there is little chance of observing it. Thus, there is no evidence in the infrared or Raman spectrum of the presence of a fourth conformer. The order of stability given by the ab initio calculations is C2(GG)>C1(AG)>C2v(AA)>Cs(GG'), where A indicates the anti form for one of the CH2Cl groups and G indicates the gauche conformation for the other CH2Cl group relative to the plane of the carbon atoms. Almost every band observed can be confidently assigned to one or another of the conformers. Many observed bands proved to be of a composite nature, with several nearly coincident vibrations of different conformers contributing to the band contour. Nonetheless, a complete assignment of fundamentals is possible for the most stable C2 conformer, and 5 of the fundamentals of the C2v conformer and 13 those of the C1 conformer can be confidently assigned.     

Covalent Schiff base catalysis and turnover by a DNAzyme: a M2+ -independent AP-endonuclease mimic

A DNAzyme, synthetically modified with both primary amines and imidazoles, is found to act as a M2+ -independent AP lyase-endonuclease. In the course of the cleavage reaction, this DNAzyme forms a covalent Schiff base intermediate with an abasic site on a complementary oligodeoxyribonucleotide. This intermediate, which is inferred from NaCNBH3 trapping as well as cyanide inhibition, does not evidently accumulate because the second step, dehydrophosphorylative elimination, is fast compared to Schiff base formation. The 5'-product that remains linked to the catalyst hydrolyzes slowly to regenerate free catalyst. The use of duly modified DNAzymes to perform Schiff base catalysis demonstrates the value of modified nucleotides for enhancing the catalytic repertoire of nucleic acids. This work suggests that DNAzymes will be capable of catalyzing aldol condensation reactions.     

Generation of 3-pyridyl biaryl systems via palladium-catalyzed Suzuki cross-couplings of aryl halides with 3-pyridylboroxin

The synthesis of 3-pyridyl biaryl systems can be readily achieved by means of palladium-catalyzed Suzuki cross-coupling reactions between aryl halides and 3-pyridylboroxin. A series of cross-couplings were conducted in order to investigate the scope and limitations of this protocol.     

Fluorescence detection of surface-bound intermediates produced from UV photoreactivity of alkylsiloxane SAMs

Detection and quantification of submonolayer coverage surface species is not trivial. We have developed a novel method sensitive to surface-bound chemical functional groups as low as 10(11) molecules/cm(2) by specific covalent attachment of fluorescent chromophores. This enables the intermediates of the UV photochemistry of alkylsiloxane self-assembled monolayers to be identified.     

Direct observation of phenylalanine orientations in statherin bound to hydroxyapatite surfaces

Extracellular biomineralization proteins such as salivary statherin control the growth of hydroxyapatite (HAP), the principal component of teeth and bones. Despite the important role that statherin plays in the regulation of hard tissue formation in humans, the surface recognition mechanisms involved are poorly understood. The protein-surface interaction likely involves very specific contacts between the surface atoms and the key protein side chains. This study demonstrates for the first time the power of combining near-edge X-ray absorption fine structure (NEXAFS) spectroscopy with element labeling to quantify the orientation of individual side chains. In this work, the 15 amino acid N-terminal binding domain of statherin has been adsorbed onto HAP surfaces, and the orientations of phenylalanine rings F7 and F14 have been determined using NEXAFS analysis and fluorine labels at individual phenylalanine sites. The NEXAFS-derived phenylalanine tilt angles have been verified with sum frequency generation spectroscopy.     

Using an electrical potential to reversibly switch surfaces between two states for dynamically controlling cell adhesion

Smart surfaces presenting both antifouling molecules with a charged functional group at their distal end, and molecules that are terminated by RGD peptides for cell adhesion, were fabricated and characterized (see picture). By applying potentials of +300 or -300?mV, the surfaces could be dynamically switched to make the peptide accessible or inaccessible to cells.     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Facile carbon-fluorine bond activation and subsequent functionalisation of 1,1-difluoroethylene and tetrafluoroethylene promoted by adjacent metal centres

The bridging fluoroolefin ligands in the complexes [Ir(2)(CH(3))(CO)(2)(μ-olefin)(dppm)(2)][OTf] (olefin = tetrafluoroethylene, 1,1-difluoroethylene; dppm = μ-Ph(2)PCH(2)PPh(2); OTf(-) = CF(3)SO(3)(-)) are susceptible to facile fluoride ion abstraction. Both fluoroolefin complexes react with trimethylsilyltriflate (Me(3)SiOTf) to give the corresponding fluorovinyl products by abstraction of a single fluoride ion. Although the trifluorovinyl ligand is bound to one metal, the monofluorovinyl group is bridging, bound to one metal through carbon and to the other metal through a dative bond from fluorine. Addition of two equivalents of Me(3)SiOTf to the tetrafluoroethylene-bridged species gives the difluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-OTf)(μ-C=CF(2))(dppm)(2)][OTf]. The 1,1-difluoroethylene species is exceedingly reactive, reacting with water to give 2-fluoropropene and [Ir(2)(CO)(2)(μ-OH)(dppm)(2)][OTf] and with carbon monoxide to give [Ir(2)(CO)(3)(μ-κ(1):η(2)-C≡CCH(3))(dppm)(2)][OTf] together with two equivalents of HF. The trifluorovinyl product [Ir(2)(κ(1)-C(2)F(3))(OTf)(CO)(2)(μ-H)(μ-CH(2))(dppm)(2)][OTf], obtained through single C-F bond activation of the tetrafluoroethylene-bridged complex, reacts with H(2) to form trifluoroethylene, allowing the facile replacement of one fluorine in C(2)F(4) with hydrogen.