Behaviour of Extractives in Norway Spruce (Picea abies) Bark during Pile Storage

The current practices regarding the procurement chain of forest industry sidestreams, such as conifer bark, do not always lead to optimal conditions for preserving individual chemical compounds. This study investigates the standard way of storing bark in large piles in an open area. We mainly focus on the degradation of the most essential hydrophilic and hydrophobic extractives and carbohydrates. First, two large 450 m³ piles of bark from Norway spruce (Picea abies) were formed, one of which was covered with snow. The degradation of the bark extractives was monitored for 24 weeks. Samples were taken from the middle, side and top of the pile. Each sample was extracted at 120 °C with both n-hexane and water, and the extracts produced were then analysed chromatographically using gas chromatography with flame ionisation or mass selective detection and high-performance liquid chromatography. The carbohydrates were next analysed using acidic hydrolysis and acidic methanolysis, followed by chromatographic separation of the monosaccharides formed and their derivatives. The results showed that the most intensive degradation occurred during the first 4 weeks of storage. The levels of hydrophilic extractives were also found to decrease drastically (69% in normal pile and 73% in snow-covered pile) during storage, whereas the decrease in hydrophobic extractives was relatively stable (15% in normal pile and 8% in snow-covered pile). The top of the piles exhibited the most significant decrease in the total level of extractives (73% in normal and snow-covered pile), whereas the bark in the middle of the pile retained the highest amount of extractives (decreased by 51% in normal pile and 47% in snow-covered pile) after 24-week storage.     

Phase retrieval of reflectance for nanoparticle optical identification

We present a method for optical identification of dielectric and metal nanoparticles in a liquid matrix using phase retrieval of reflectance with TE- and TM-polarized light. A formula is derived for extracting the effective complex dielectric function of a nanoparticle colloid based on different complex reflectance components. The phase retrieval is performed using the maximum entropy method. We observe excellent accuracy both for dielectric and metallic nanoparticles with volume fractions up to 10%.     

XPS and SEM study of calcite bearing rock powders in the case of reactivity measurement with HCl solution

The dissolution of seven natural limestones and calcareous rocks in hydrochloric acid solution was examined to investigate their capability for wet flue gas desulphurisation. All samples were crushed, ground and sieved to a size‐fraction of 150–250 µm. Thereafter they were subjected to a dissolution experiment utilising stepwise titration with hydrochloric acid. The dissolution rates of three calcareous rocks were found to be controlled by reaction kinetics, while the limestones showed mass transfer control. The surface characterisation was implemented before and after dissolution experiments using X‐ray photoelectron spectroscopy and scanning electron microscopy. Additional characterisation was carried out with X‐ray diffraction, X‐ray fluorescence and polarizing microscope. Initial reactivities have been shown to decrease in the order limestone, calcareous rock with high calcium concentration, calcareous rock with low calcium concentration. Coarse grain structure is proposed to decrease the initial reactivity. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface-enhanced Raman scattering active substrates by liquid flame spray deposited and inkjet printed silver nanoparticles

Surface-enhanced Raman scattering (SERS) active substrates were made via liquid flame spray deposition and inkjet printing of silver nanoparticles. Both processes are suitable for cost-effective fabrication of large-area SERS substrates. Crystal violet (CV) solutions were used as target molecules and in both samples the detection limit was approximately 10 nM. In addition, sintering temperature of the inkjet printed silver nanoparticles was found to have a large effect on the SERS activity with the higher curing temperature of 200 °C resulting in contamination layer on silver and cancelation of the SERS signal. This layer was characterized using an X-ray photoelectron spectroscopy (XPS).     

Adjustable wettability of paperboard by liquid flame spray nanoparticle deposition

Liquid flame spray process (LFS) was used for depositing TiO_x and SiO_x nanoparticles on paperboard to control wetting properties of the surface. By the LFS process it is possible to create either superhydrophobic or superhydrophilic surfaces. Changes in the wettability are related to structural properties of the surface, which were characterized using scanning electron microscope (SEM) and atomic force microscope (AFM). The surface properties can be ascribed as a correlation between wetting properties of the paperboard and the surface texture created by nanoparticles. Surfaces can be produced inline in a one step roll-to-roll process without need for additional modifications. Furthermore, functional surfaces with adjustable hydrophilicity or hydrophobicity can be fabricated simply by choosing appropriate liquid precursors.