Bio-compatible in-tube solid-phase microextraction capillary for the direct extraction and high-performance liquid chromatographic determination of drugs in human serum

A restricted access material (RAM), alkyl-diol-silica (ADS), was used to prepare a highly bio-compatible solid-phase microextraction (SPME) capillary for the automated and direct in-tube extraction of several benzodiazepines from human serum. The bifunctionality of the ADS extraction phase prevented fouling of the capillary by protein adsorption while simultaneously trapping the analytes in the hydrophobic porous interior. This the first report of a restricted access material utilized as an extraction phase for in-tube SPME. The approach simplified the required apparatus in comparison to existing RAM column switching procedures, and more importantly eliminated the excessive use of extraction solvents. The biocompatibility of the ADS material also overcame the existing problems with in-tube SPME that requires an ultrafiltration or other deproteinization step prior to handling biological samples, therefore further minimizing the sample preparation requirements. The calculated oxazepam, temazepam, nordazepam and diazepam detection limits were 26, 29, 22 and 24 ng/ml in serum, respectively. The method was linear over the range of 50-50 000 ng/ml with an average linear coefficient (R2) value of 0.9998. The injection repeatability and intra-assay precision of the method were evaluated with five injections of a 10-microg/ml serum sample (spiked with all compounds), resulting in an average RSD<7%. The ADS extraction column was robust, providing many direct injections of biological fluids for the extraction and subsequent determination of benzodiazepines.     

Me2Zn‐Mediated Catalytic Enantio‐ and Diastereoselective Addition of TosMIC to Ketones

The first catalytic asymmetric addition of TosMIC to unactivated ketones is presented. A combination of Me₂Zn and aminoalcohol catalyst promoted the aldol addition/cyclization reaction to render oxazolines possessing a fully substituted stereocenter with excellent yields (up to 92 %), high enantioselectivities (up to 96 %), and complete diastereoselectivity. The chiral oxazolines were then used to give, after a straightforward acid hydrolysis, enantioenriched building blocks bearing tertiary alcohol motifs such as hydroxylaldehydes, hydroxylacids, and hydroxylesters without racemization.     

Thermal Transformations of CuNH4PO4⋅H2O

The isothermal and non-isothermal transformations of polycrystalline CuNH₄PO₄⋅H₂O in vacuum and in various gas atmospheres (in open air and in gaseous ammonia atmosphere) were studied at 20–800°C by means of differential thermal analysis, thermogravimetry, X-ray diffraction, paper chromatography, optical microscopy and chemical analyses. The effects of the gas phase composition on the kinetic peculiarities of total gas evolution and on the partial processes of dehydration, ammonia removal and rearrangement of the anionic sub-lattice were considered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Factors Influencing the Course of the Macrocyclization of α,ω‐Diamines with Esters of α,ω‐Dicarboxylic Acids

The efficient synthesis of eight new macrocyclic amides (lactams) via reaction of diesters with diamines under normal dilution conditions is described. The role of intermolecular H‐bond formation and steric hindrance is discussed based on ¹H‐ and ¹⁵N‐NMR studies of appropriate model compounds. Principles for the optimal choice of esters that can be efficiently transformed into diamides have been developed.     

Cold fiber solid-phase microextraction device based on thermoelectric cooling of metal fiber

A new cold fiber solid-phase microextraction device was designed and constructed based on thermoelectric cooling. A three-stage thermoelectric cooler (TEC) was used for cooling a copper rod coated with a poly(dimethylsiloxane) (PDMS) hollow fiber, which served as the solid-phase microextraction (SPME) fiber. The copper rod was mounted on a commercial SPME plunger and exposed to the cold surface of the TEC, which was enclosed in a small aluminum box. A heat sink and a fan were used to dissipate the generated heat at the hot side of the TEC. By applying an appropriate dc voltage to the TEC, the upper part of the copper rod, which was in contact to the cold side of the TEC, was cooled and the hollow fiber reached a lower temperature through heat transfer. A thermocouple was embedded in the cold side of the TEC for indirect measurement of the fiber temperature. The device was applied in quantitative analysis of off-flavors in a rice sample. Hexanal, nonanal, and undecanal were chosen as three off-flavors in rice. They were identified according to their retention times and analyzed by GC-flame ionization detection instrument. Headspace extraction conditions (i.e., temperature and time) were optimized. Standard addition calibration graphs were obtained at the optimized conditions and the concentrations of the three analytes were calculated. The concentration of hexanal was also measured using a conventional solvent extraction method (697+/-143ng/g) which was comparable to that obtained from the cold fiber SPME method (644+/-8). Moreover, the cold fiber SPME resulted in better reproducibility and shorter analysis time. Cold fiber SPME with TEC device can also be used as a portable device for field sampling.     

Photodynamic Therapy Efficacy Enhanced by Dynamics: The Role of Charge Transfer and Photostability in the Selection of Photosensitizers

Progress in the photodynamic therapy (PDT) of cancer should benefit from a rationale to predict the most efficient of a series of photosensitizers that strongly absorb light in the phototherapeutic window (650–800 nm) and efficiently generate reactive oxygen species (ROS=singlet oxygen and oxygen‐centered radicals). We show that the ratios between the triplet photosensitizer–O₂ interaction rate constant (k_D) and the photosensitizer decomposition rate constant (k_d), k_D/k_d, determine the relative photodynamic activities of photosensitizers against various cancer cells. The same efficacy trend is observed in vivo with DBA/2 mice bearing S91 melanoma tumors. The PDT efficacy intimately depends on the dynamics of photosensitizer–oxygen interactions: charge transfer to molecular oxygen with generation of both singlet oxygen and superoxide ion (high k_D) must be tempered by photostability (low k_d). These properties depend on the oxidation potential of the photosensitizer and are suitably combined in a new fluorinated sulfonamide bacteriochlorin, motivated by the rationale.     

New cold-fiber headspace solid-phase microextraction device for quantitative extraction of polycyclic aromatic hydrocarbons in sediment

A new automated headspace solid-phase microextraction (HS-SPME) sampling device was developed, with the capability of heating the sample matrix and simultaneously cooling the fiber coating. The device was evaluated for the quantitative extraction of polycyclic aromatic hydrocarbons (PAHs) from solid matrices. The proposed device improves the efficiency of the release of analytes from the matrix, facilitates the mass transfer into the headspace and significantly increases the partition coefficients of the analytes, by creating a temperature gap between the cold-fiber (CF) coating and the hot headspace. The reliability and applicability of previously reported cold-fiber devices are significantly enhanced by this improvement. In addition, it can be easily adopted for full automation of extraction, enrichment and introduction of different samples using commercially available autosampling devices. Sand samples spiked with PAHs were used as solid matrices and the effect of different experimental parameters were studied, including the extraction temperature, extraction time, moisture content, and the effect of sonication and modifier under optimal experimental conditions, linear calibration curves were obtained in the range of 0.0009-1000 ng/g, with regression coefficients higher than 0.99 and detection limits that ranged from 0.3 to 3 pg/g. Reproducible, precise and high throughput extraction, monitoring and quantification of PAHs were achieved with the automated cold-fiber headspace solid-phase microextraction (CF-HS-SPME) device coupled to GC-flame ionization detection. Determination of PAHs in certified reference sediments using the proposed approach exhibited acceptable agreement with the standard values.     

Silicone‐urethane membranes for lithium batteries. Part 1. Moisture‐cured poly(siloxane‐urethane‐urea) elastomers containing polyethylene oxide (PEO) segments – synthesis and characterization as potential membrane materials

Poly(siloxane‐urethane‐urea) elastomers containing both polysiloxane and polyethylene oxide (PEO) segments in the polymer chain were obtained by moisture‐curing of NCO‐terminated poly(siloxane‐urethane) prepolymers synthesized from isophorone diisocyanate and mixtures of polyoxyethylene diols and polysiloxane diols with various molecular weights. Mechanical properties of the moisture‐cured films and their swelling ability in solvent mixtures commonly used in lithium batteries were investigated, and it was found that they were greatly influenced by PEO content in the polymer. PEO content in the polymer was also found to affect very much the electric conductivity of the films after immersion in lithium salt solution in ethylene carbonate–dimethyl carbonate solvent mixture. At high contents of PEO in the polymer chain specific conductivities of the films in a range of 10^?3, Scm^?1 could be achieved at room temperature. Based on the results of Scanning Electron Microscopy with X‐ray Analysis (SEM/EDS) investigations and wide‐angle X‐ray scattering and small‐angle X‐ray scattering studies, it could be anticipated that the reason for good conductivity of the films might be their specific supramolecular structure that potentially facilitated lithium ion mobility. Copyright © 2015 John Wiley & Sons, Ltd.     

Proton hydration in aqueous solution: Fourier transform infrared studies of HDO spectra

This paper attempts to elucidate the number and nature of the hydration spheres around the proton in an aqueous solution. This phenomenon was studied in aqueous solutions of selected acids by means of Fourier transform infrared spectroscopy of semiheavy water (HDO), isotopically diluted in H(2)O. The quantitative version of difference spectrum procedure was applied for the first time to investigate such systems. It allowed removal of bulk water contribution and separation of the spectra of solute-affected HDO. The obtained spectral data were confronted with ab initio calculated structures of small gas-phase and polarizable continuum model (PCM) solvated aqueous clusters, H+(H2O)n, n=2-8, in order to help in establishing the structural and energetic states of the consecutive hydration spheres of the hydrated proton. This was achieved by comparison of the calculated optimal geometries with the interatomic distances derived from HDO band positions. The structure of proton hydration shells outside the first hydration sphere essentially follows the model structure of other hydrated cations, previously revealed by affected HDO spectra. The first hydration sphere complex in diluted aqueous solutions was identified as an asymmetric variant of the regular Zundel cation [The Hydrogen Bond: Recent Developments in Theory and Experiments, edited by P. Schuster, G. Zundel, and C. Sandorfy (North-Holland, Amsterdam, 1976), Vol. II, p. 683], intermediate between the ideal Zundel and Eigen structures [E. Wicke et al., Z. Phys. Chem. Neue Folge 1, 340 (1954)]. Evidence was found for the existence of strong and short hydrogen bonds, with oxygen-oxygen distance derived from the experimental affected spectra equal 2.435 A on average and in the PCM calculations about 2.41-2.44 A. It was also evidenced for the first time that the proton possesses four well-defined hydration spheres, which were characterized in terms of hydrogen bonds' lengths and arrangements. Additionally, an outer hydration layer, shared with the anion, as well as loosely bound water molecules interacting with free electron pairs of the central complex were detected in the affected spectra.     

On characterization of Poisson and Jacobi structures

We characterize Poisson and Jacobi structures by means of complete lifts of the corresponding tensors: the lifts have to be related to canonical structures by morphisms of corresponding vector bundles. Similar results hold for generalized Poisson and Jacobi structures (canonical structures) associated with Lie algebroids and Jacobi algebroids.