Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Cyclic chronopotentiometry of nickel(II) at mercury electrodes in acidic perchlorate solutions: Case of higher order nonregenerative reactions following electron transfer

The reduction of Ni²⁺ ions at mercury electrodes in acidic perchlorate solutions, at perchlorate concentrations below 0.2 M, is characterized by absence of kinetic control in the preceding step, and by a complex reaction mechanism following the electron transfer. This reaction sequence is known to involve intermetallic compound formation between Ni and Hg and is best described, as shown here, by a parallel second and third order kinetic scheme. Apparent rate coefficients for this kinetic scheme were determined using cyclic chronopotentiometric data and fitting by digital simulation. A linearization test of computed kinetic rate coefficients versus the number of transitions permits quantitative tests of validity of assumptions made.     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

IAEA quality control studies on determining trace elements in bioindicators

Twenty laboratories from 17 countries around the world participated in two analytical quality control exercises, coded NAT-5 and NAT-6, on determining trace and minor elements in plant bioindicator samples. 1398 laboratory mean values for 51 elements were submitted for two lichen and two moss materials. The submitted measurement results were evaluated as interlaboratory comparison (IC) exercises and as proficiency tests (PT) following standard procedures developed by the International Atomic Energy Agency (IAEA). The evaluations confirmed good performance of the participating laboratories for many elements. Furthermore, the laboratories performance based on IC criteria improved from the first exercise to the second one. Subsequent NAT-5 evaluation revealed systematic differences between the analytical values obtained non-destructively or after the total sample dissolution and the measurements following nitric acid sample dissolution (without the use of hydrofluoric acid) for some elements. The most critical elements for this kind of discrepancies appeared to be Al, Ca, Cr, Fe, Na, Ni, and Pb. After changing analytical methodologies in the concerned laboratories, more consistent values for those elements were obtained in NAT-6. This revised version was published online in August 2006 with corrections to the Cover Date.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

Peroxides of higher aliphatic ethers

The oxidation of higher aliphatic ethers with oxygen at 50° yields two peroxides as the main oxidation products for each ether, namely a dihydroperoxy-dialkyl ether and a dihydroperoxy-dialkyl peroxide. The mass spectra of these compounds are recorded and the main fragmentation pattern is discussed.     

Thermal decomposition of N2H6GeF6 · H2O,isolation and characterization of intermediates

The thermal behaviour of N₂H₆GeF₆ · H₂O was investigated by TG, DTG and DTA measurements. The decomposition proceeded in three steps, in which anhydrous N₂H₆GeF₆ and N₂H₅GeF₅; were isolated and characterized by chemical analysis and vibrational spectroscopy. The X-ray powder photographs of the intermediates were indexed, namely, for N₂H₆GeF₆ on the basis of a monoclinic cell with a = 8.86(9), b = 9.29(2), c =7.40(0) Å, β = 85° and for N₂H₅GeF₅ on the basis of an ortrhorhombic cell with a = 8.43(5),b = 9.19(9), c = 7.43(6) Å.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Aromatic substitution

It is demonstrated that a previously developed topological expression for the total π-electron energy of aromatic molecules provides a good qualitative account of localization energies. The logarithm of the ratio of the algebraic structure counts for the ground state and the localized reaction intermediate is the principle energy determining factor. This expression fails for hydrocarbons with unusually small HOMO-LUMO separations. An alternative topological expression that includes a correction for this situation provides an excellent non-empirical explanation for the successful empirical use of Dewar reactivity numbers in correlating exact localization energies. The present analysis provides an explanation for the success of the traditional resonance structure counting technique in predicting relative rates of aromatic substitution. The analysis develop applied only to alternant hydrocarbons.