How Carbon Nanotube Crushing can Improve Flame Retardant Behaviour in Polymer Nanocomposites?

Nanocomposites based on an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) and multiwall carbon nanotubes (MWNTs) have been prepared by melt blending and their thermal degradation and flame retardant properties have been evaluated. Special attention has been paid to the influence of the nanotube nature on the flammability properties and more particularly on the time to ignition (TTI) as measured by cone calorimetry. It has been shown that there is a strong influence of the nature of carbon nanotubes on the fire behaviour of the composites, especially previous MWNTs crushing proved to substantially delay the TTI while maintaining much reduced heat release rate (HRR). Such a remarkable behaviour might be explained by the chemical reactivity of radical species present at the surface/extremities of crushed MWNTs during the combustion process.

     

Isobaric volume and enthalpy recovery of glasses. II. A transparent multiparameter theory

A multiordering parameter model for glass-transition phenomena has been developed on the basis of nonequilibrium thermodynamics. In this treatment the state of the glass is determined by the values of N ordering parameters in addition to T and P; the departure from equilibrium is partitioned among the various ordering parameters, each of which is associated with a unique retardation time. These times are assumed to depend on T, P, and on the instantaneous state of the system characterized by its overall departure from equilibrium, giving rise to the well-known nonlinear effects observed in volume and enthalpy recovery. The contribution of each ordering parameter to the departure and the associated retardation times define the fundamental distribution function (the structural retardation spectrum) of the system or, equivalently, its fundamental material response function. These, together with a few experimentally measurable material constants, completely define the recovery behavior of the system when subjected to any thermal treatment. The behavior of the model is explored for various classes of thermal histories of increasing complexity, in order to simulate real experimental situations. The relevant calculations are based on a discrete retardation spectrum, extending over four time decades, and on reasonable values of the relevant material constants in order to imitate the behavior of polymer glasses. The model clearly separates the contribution of the retardation spectrum from the temperature-structure dependence of the retardation times which controls its shifts along the experimental time scale. This is achieved by using the natural time scale of the system which eliminates all the nonlinear effects, thus reducing the response function to the Boltzmann superposition equation, similar to that encountered in the linear viscoelasticity. As a consequence, the system obeys a rate (time) -temperature reduction rule which provides for generalization within each class of thermal treatment. Thus the model establishes a rational basis for comparing theory with experiment, and also various kinds of experiments between themselves. The analysis further predicts interesting features, some of which have often been overlooked. Among these are the impossibility of extraction of the spectrum (or response function) from experiments involving cooling from high temperatures at finite rate; and the appearance of two peaks in the expansion coefficient, or heat capacity, during the heating stage of three-step thermal cycles starting at high temperatures. Finally, the theory also provides a rationale for interpreting the time dependence of mechanical or other structure-sensitive properties of glasses as well as for predicting their long-range behavior.     

A simple phenomenological approach to the thermal behavior of glasses during uniform heating or cooling

Thermal behavior of glasses, as observed from the isobaric variations of volume, v, and enthalpy, H, is analyzed in terms of retardation kinetics. A phenomenological theory involving a single retardation time, τ, is developed, assuming that molecular mobility is controlled essentially by the actual free volume, or configurational entropy of the glassy specimen. The characteristic features of the v and H isobars, as derived from the theory, are examined as a function of the thermal history of a typical glassy specimen. The respective contributions of temperature and structural parameters to τ, are also discussed in terms of the characteristic parameters of the isobars. The theoretical predictions are compared with some dilatometric data obtained with an atactic polystyrene. The comparison reveals the limitations of the theoretical treatment and suggests that glass-transition phenomena involve more than one retardation mechanism.     

Patterns in the vocalizations of male harbor seals

Comparative analyses of the roar vocalization of male harbor seals from ten sites throughout their distribution showed that vocal variation occurs at the oceanic, regional, population, and subpopulation level. Genetic barriers based on the physical distance between harbor seal populations present a likely explanation for some of the observed vocal variation. However, site-specific vocal variations were present between genetically mixed subpopulations in California. A tree-based classification analysis grouped Scottish populations together with eastern Pacific sites, rather than amongst Atlantic sites as would be expected if variation was based purely on genetics. Lastly, within the classification tree no individual vocal parameter was consistently responsible for consecutive splits between geographic sites. Combined, these factors suggest that site-specific variation influences the development of vocal structure in harbor seals and these factors may provide evidence for the occurrence of vocal dialects.     

Analysis of dopamine D4 receptor gene polymorphism using microchip electrophoresis

A microfabricated electrophoresis device was used for rapid polymerase chain reaction product analysis in genotyping the dopamine D4 receptor gene (DRD4) 48 base pairs repeat polymorphism. An allelic ladder, prepared from homozygous individuals, was used as internal standard during the microchip electrophoresis based analysis. Comparison of this novel separation method with the conventional slab gel and previously reported ultra-thin-layer techniques confirmed the reliability of this new method. Genotyping of 332 healthy Hungarian individuals gave the following allele frequencies: two-repeat: 0.089; three-repeat: 0.026; four-repeat: 0.674; five-repeat: 0.011; six-repeat: 0.002; seven-repeat: 0.189; eight-repeat: 0.011. The genotype frequencies obtained showed no deviation from the Hardy-Weinberg equilibrium (p>0.903), further underlying the reliability of this new genotyping technique.     

Measurements of side-chain 13C-13C residual dipolar couplings in uniformly deuterated proteins

13C-only spectroscopy was used to measure multiple residual (13)C-(13)C dipolar couplings (RDCs) in uniformly deuterated and (13)C-labeled proteins. We demonstrate that (13)C-start and (13)C-observe spectra can be routinely used to measure an extensive set of the side-chain residual (13)C-(13)C dipolar couplings upon partial alignment of human ubiquitin in the presence of bacteriophages Pf1. We establish that, among different broadband polarization transfer schemes, the FLOPSY family can be used to exchange magnetization between a J coupled network of spins while largely decoupling dipolar interactions between these spins. An excellent correlation between measured RDCs and the 3D structure of the protein was observed, indicating a potential use of the (13)C-(13)C RDCs in the structure determination of perdeuterated proteins.     

Investigation of Al diffusion in different oxide thin-film layers by SNMS/HFM method

Depth profiles of Ga₂O₃/a-SiO₂/Al₂O₃- substrate, Ga₂O₃/a-Si₃N₄/Al₂O₃- substrate, and Ga₂O₃/Al₂O₃ substrate thin layers were determined by the SNMS/HFM method. Al diffusion from the Al₂O₃ substrate was investigated after 50, and in some cases after 600 hours of heat treatment time at different temperatures (600 °C,850 °C,950 °C,1050 °C and 1150 °C). The diffusion coefficient of Al at 850 °C was found to be D _Al=8.7 * 10^–18 cm²/s in amorphous SiO₂; D _Al=1.5*10^–17 cm²/s in amorphous Si₃N₄ and D _Al=5.5* 10^–16 cm²/s in Ga₂O₃ at 600 °C, respectively. The possible diffusion mechanism is explained in terms of the metal-oxygen bond-strengths. Although the studied materials have high resistivity at room temperature, the applied SNMS/HFM method has proven to be an efficient surface analytical tool even in these cases.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Quantitation of the nearest-neighbour effects of amino acid side-chains that restrict conformational freedom of the polypeptide chain using reversed-phase liquid chromatography of synthetic model peptides with L- and D-amino acid substitutions

Side-chain backbone interactions (or "effects") between nearest neighbours may severely restrict the conformations accessible to a polypeptide chain and thus represent the first step in protein folding. We have quantified nearest-neighbour effects (i to i+1) in peptides through reversed-phase liquid chromatography (RP-HPLC) of model synthetic peptides, where L- and D-amino acids were substituted at the N-terminal end of the peptide sequence, adjacent to a L-Leu residue. These nearest-neighbour effects (expressed as the difference in retention times of L- and D-peptide diastereomers at pHs 2 and 7) were frequently dramatic, depending on the type of side-chain adjacent to the L-Leu residue, albeit such effects were independent of mobile phase conditions. No nearest-neighbour effects were observed when residue i is adjacent to a Gly residue. Calculation of minimum energy conformations of selected peptides supported the view that, whether a L- or D-amino acid is substituted adjacent to L-Leu, its orientation relative to this bulky Leu side-chain represents the most energetically favourable configuration. We believe that such energetically favourable, and different, configurations of L- and D-peptide diastereomers affect their respective interactions with a hydrophobic stationary phase, which are thus quantified by different RP-HPLC retention times. Side-chain hydrophilicity/hydrophobicity coefficients were generated in the presence of these nearest-neighbour effects and, despite the relative difference in such coefficients generated from peptides substituted with L- or D-amino acids, the relative difference in hydrophilicity/hydrophobicity between different amino acids in the L- or D-series is maintained. Overall, our results demonstrate that such nearest-neighbour effects can clearly restrict conformational space of an amino acid side-chain in a polypeptide chain.