Selective flow injection analysis of ultra-trace amounts of Cr(VI), preconcentration of it by solvent extraction, and determination by electrothermal atomic absorption spectrometry (ETAAS)

A rapid, robust, sensitive and selective time-based flow injection (FI) on-line solvent extraction system interfaced with electrothermal atomic absorption spectrometry (ETAAS) is described for analyzing ultra-trace amounts of Cr(VI). The sample is initially mixed on-line with isobutyl methyl ketone (IBMK). The Cr(VI) is complexed by reaction with ammonium pyrrolidine dithiocarbamate (APDC), and the non-charged Cr(VI)–PDC chelate formed is extracted into IBMK in a knotted reactor made from PTFE tubing. The organic extractant is separated from the aqueous phase by a gravity phase separator with a small conical cavity and delivered into a collector tube, from which 55 μl organic concentrate is subsequently introduced via an air flow into the graphite tube of the ETAAS instrument. The operations of the FI-system and the ETAAS detector are synchronously coupled. A significant advantage of the approach is that matrix constituents, such as high salt contents, effectively are eliminated. The extraction procedure was optimized by a simplex approach. A central composite design was subsequently employed to verify the estimated operational optimum. An 18-fold enhancement in sensitivity of Cr(VI) was achieved after preconcentration for 99 s at a sample flow rate of 5.5 ml min⁻¹, as compared to direct introduction of 55 μl of sample, yielding a detection limit (3σ) of 3.3 ng l⁻¹. The sampling frequency was 24.2 samples h⁻¹. The proposed method was successfully evaluated by analyzing a NIST Cr(VI)-reference material, synthetic seawater and waste waters, and waste water samples from an incineration plant and a desulphurization plant, respectively.     

Experimental study of embedding of attractors in concentration space

The embedding of attractors and their stable and unstable manifolds can be studied experimentally by controlled addition of chemical species to bring about a particular response. For stable small amplitude oscillations near a Hopf bifurcation from a steady state the embedding can be completely determined even in systems where two of the species are not observable. A quenching of the oscillations by dilution candetermine the steady state concentrations. A species that cannot quench the oscillations almost certainly cannot be an essential component of the oscillation. The method can be extended to a study of attractor associated with subharmonic and quasiperiodic bifurcations and of attractors corresponding to nonperiodic motion. We present preliminary results for a subharmonic bifurcation.     

Synthetic protocols and building blocks for molecular electronics

Simple and readily accessible aryl bromides are useful building blocks for thiol end-capped molecular wires. Thus, 4-bromophenyl tert-butyl sulfide and 1-bromo-4-(methoxymethyl)benzene serve as precursors for a variety of oligo(phenylenevinylene) and oligo(phenyleneethynylene) wires via efficient synthetic transformations as presented in this paper.     

Validation of a high performance liquid chromatography analysis for the determination of noradrenaline and adrenaline in human urine with an on-line sample purification

A high performance liquid chromatography (HPLC) method with fluorescence detection including an on-line purification was established for determination of catecholamines in human urine. The method was evaluated using samples of pooled urine spiked with catecholamines and validated for measurements of catecholamines in urine of healthy individuals in a field study. The laboratory method evaluation study showed that the recovery of the method was 0.82 (confidence interval (CI): 0.79-0.86) and 0.92 (CI: 0.89-0.95) for noradrenaline and adrenaline, respectively. Thus, correction factors of 0.82(-1) and 0.92(-1) were applied to correct the measurement results for this systematic effect. Furthermore, an uncertainty budget was generated for the analytical method using the BIPM-approach recommended by the International Organization for Standardization. The relative uncertainty of the method was estimated to be 10-12%, which was consistent with the observed relative variability found in the method evaluation. The method was evaluated in accordance with EURACHEM Guidance Document No 1 concerning accreditation for chemical laboratories with respect to accuracy and precision. The field study showed that the standard deviation of the method was sufficiently low to distinguish between persons working with two different processes of garbage collection, i.e. collection using four wheeled containers versus collection using bins.     

Photo/thermochromic macrocycles based on dihydroazulenes,dithienylethenes, and spiropyrans

Suitably functionalized dihydroazulenes (DHAs), dithienylethenes (DTEs), and spiropyrans (SPs) are photo-active molecules that upon irradiation undergo isomerization by ring-opening/closure reactions, which involve carbon-carbon or carbon-heteroatom bond formation/breakage. These photo-isomers may return to the original ones under light or thermal activation. Introducing molecular photoswitches into macrocyclic structures can have strong implications for the forward and backward switching properties. In this report we summarize synthetic protocols for making macrocycles based on one or more units of DHA, DTE, and SP and the resulting properties of these macrocycles.     

5‐(2‐Pyridyl)‐1,3‐di­thia­ne‐2‐thione

The title compound, C₉H₉NS₃, crystallizes with two mol­ecules in the asymmetric unit. In both mol­ecules, the di­thia­ne‐2‐thione rings adopt a symmetric half‐boat conformation with the C atom opposite the C—S_thione bond out of the plane. The pyridine ring is in an equatorial position and is twisted out of the plane of the half‐boat by 82.7 (2) and 84.5 (2)° in the two mol­ecules, so that the N atom is trans to the axial C—H bond in both cases.     

Simultaneous determination of chromium(III) and chromium(VI) in aqueous solutions by ion chromatography and chemiluminescence detection.

A method for the simultaneous determination of chromium(iii) and chromium(vi) in a flow system based on chemiluminescence was developed. A Dionex cation-exchange guard column was used to separate chromium(iii) from chromium(vi), and chromium(vi) was reduced by potassium sulfite, whereupon both species were detected by use of the luminol-hydrogen peroxide chemiluminescence system. Linear calibration for both species was established over the concentration range 1-1000 micrograms l-1. The precision at the 20 micrograms l-1 level was 3.5% for chromium(iii) and 3.3% for chromium(vi), respectively. The detection limit was 0.5 micrograms l-1 for both species. Data were in agreement with Zeeman-effect background corrected atomic absorption spectrometry measurements.     

Pulse radiolysis and fourier transform infrared study of neopentyl peroxy radicals in the gas phase at 297 K

The ultraviolet absorption spectrum of the neopentyl peroxy radical (CH₃)₃CCH₂O₂, and the kinetics and products of its self reaction have been studied in the gas phase at 298 K. Absorption cross sections were quantified over the wavelength range 230–290 nm. The measured cross section at 250 nm was; Errors represent statistical (2σ) together with our estimate of potential systematic errors(15%). The kinetics of the decay of the UV absorption following the generation of the neopentyl peroxy radicals was complicated by the rapid decomposition of the (CH₃)₃CCH₂O radicals formed in channel (4a). By measuring the yield of t-butyl peroxy radicals, the branching ratio k_4a/(k_4a + k_4b) was determined to be 0.39 ± 0.03. The rate constant for the self reaction of neopentyl peroxy radicals was k₄ = (1.07 ± 0.22) × 10^?12 cm³ molecule^?1 s^?1. Quoted errors represent 2σ. These results are discussed with respect to the available literature data. © John Wiley & Sons, Inc.     

Evaluation of the use of liquid dishwashing compounds to control bacteria in kitchen sponges

A test procedure for evaluating the effect of adding commercial liquid hand dishwashing detergents to kitchen sponges to control microbial growth is described. Claims for this type of application are being made on dishwashing detergents throughout the world. In this evaluation, commercially available kitchen sponges were stripped of antimicrobial compounds. Sponges were then inoculated with a pool of 7 microorganisms which consisted of gram positives, gram negatives, and yeast. Inoculated sponges were treated with the detergent as recommended by the manufacturer and allowed to incubate for 16 h at ambient temperature. Surviving microorganisms were then quantitated using either the spiral or pour plate method. Tests were run using both clean sponges and sponges soiled with 0.5% nonfat dry milk (NFDM). Untreated sponges showed stasis or slightly increased bacterial populations after the incubation period in the absence of NFDM. Significant increases of up to 3 log cfu/mL were observed for untreated sponges when soiled with NFDM. Statistically significant reductions were observed for clean sponges (99.8-99.9998%) and sponges soiled with NFDM (87.6-99.9%) when detergents making "antibacterial sponge" claims were added to the inoculated sponges. Statistically significant differences between detergents making "antibacterial sponge" claims were also observed.