Influence of annealing temperature on morphological and magnetic properties of La0.9Sr0.1MnO3

The nanocrystalline samples of La_0.9Sr_0.1MnO₃ (LSMO) have been prepared by the combustion method. The thermo gravimetric analysis of precursor was carried out. The X-ray diffraction study confirms the rhombohedral crystal structure without any other impurity phases. The morphology and magnetic properties change with annealing temperature. The saturation magnetization increases linearly and coercivity of the nanoparticles varies significantly as annealing temperature increases. The maximum saturation magnetization and lower coercivity found for the sample heat treated at 1200 °C are 52.5 emu/g and 10.7 Oe respectively.     

New Chromogenic Spray Reagent for Detection and Identification of Carbosulfan

JPC – Journal of Planar Chromatography – Modern TLC - A new chromogenic spray reagent has been used for detection and identification of carbosulfan in HPTLC. Alkaline hydrolysis of...     

Ultrasound Promoted and Ionic Liquid Catalyzed Cyclocondensation Reaction for the Synthesis of 4(3H)-Quinazolinones

4(3H)‐Quinazolinones were synthesized in high yields by one‐pot three‐component condensation of anthranilic acid, carboxylic acid and aniline in the presence of ionic liquid such as 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄) as catalyst under solvent free and neutral conditions.     

From beads-to-wires-to-fibers of tungsten oxide: electrochromic response

Suitable host lattice and morphology for easy intercalation and deintercalation process are crucial requirements for electrochromic device. In this investigation, the evolution of structural and morphological changes and their effect on electrochromic (EC) properties of spray-deposited WO₃ thin films are studied. Films of different morphologies were deposited from an ammonium tungstate precursor solution using a novel pulsed spray pyrolysis technique (PSPT) on tin-doped indium oxide (ITO) coated glass substrates by varying quantity of spraying solution. Interesting morphological transition from beads-to-wires-to-fibers as a function of quantity of sprayed solution has been demonstrated. The porosity, crystallinity and “open” structures in the films consisting of beads, wires, and fiber-like morphology enabled us to correlate these aspects to their EC performance. WO₃ films comprising wire-like morphology (20 cc spraying quantity) exhibited better EC properties both in terms of coloration efficiency (42.7 cm²/C) and electrochemical stability (10³ colored/bleached cycles) owing to their adequate open structure, porosity, and amorphicity, compared with the films having bead/fiber-like morphology.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Interfacial Engineering of CdO–CdSe 3D Microarchitectures with in situ Photopolymerized PEDOT for an Enhanced Photovoltaic Performance

In the present work, porous 3D CdO‐microstructured electrode obtained by pyrolysis of 3D CdCO₃ microstructures is self‐sensitized with CdSe using an ion exchange reaction. After sensitization, an interfacial treatment of the CdO–CdSe interface is performed by depositing a thin film of PEDOT using a photoinduce polymerization route. The microstructured electrode before and after interfacial treatment is characterized using field‐emission scanning microscope, energy dispersive X‐ray analyzer, contact angle measurement, UV–Visible absorption spectrophotometer and X‐ray photoelectron spectrometer. After constructing a liquid junction solar cell with a Pt counter electrode, the photovoltaic performance and interfacial charge transfer kinetics across the CdO–CdSe interface before and after PEDOT treatment are investigated. The results exhibit an improved interfacial charge‐transfer resistance after the PEDOT treatment, which leads to enhance the short‐circuit current by 15.81% and the power conversion efficiency by 19.82%.     

Reliable and reproducible colorimetric detection of mercury ions (Hg2+) using green synthesized optically active silver nanoparticles containing thin film on flexible plastic substrate

Journal of Solid State Electrochemistry - Green synthesis of optically active silver nanoparticles (Ag) containing thin film on flexible plastic strip substrate has been carried using guava leaf...     

A visual strip sensor for determination of iron

A visual strip has been developed for sensing iron in different aqueous samples like natural water and fruit juices. The sensor has been synthesized by UV-radiation induced graft polymerization of acrylamide monomer in microporous poly(propylene) base. For physical immobilization of iron selective reagent, the in situ polymerization of acrylamide has been carried out in the presence of 1,10-phenanthroline. The loaded strip on interaction with Fe(II) in aqueous solution turned into orange red color and the intensity of the color was found to be directly proportional to the amount of Fe(II) in the aqueous sample. The minimal sensor response with naked eye was found for 50 ng mL⁻¹ of Fe in 15 min of interaction. However, as low as 20 ng mL⁻¹ Fe could be quantified using a spectrophotometer. The detection limit calculated using the 3s/S criteria, where ‘s’ is the standard deviation of the absorbance of blank reagent loaded strip and ‘S’ is the slope of the linear calibration plot, was 1.0 ng mL⁻¹. The strip was applied to measure Fe in a variety of samples such as ground water and fruit juices.