Efficient deep blue organic light emitting diodes based on [2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)-7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g]quinoline] derivatives

Abstract

In this study, as the ongoing effort to develop efficient blue OLEDs, two deep blue emitters based on indenoquinoline-substituted anthracene derivatives have been synthesized and characterized. Multilayer organic light emitting diodes were fabricated with the following sequence: indium-tin-oxide (ITO)/4,4’,4’’-tris[2-naphthyl(phenyl)amino (2-TNATA)/4,4’-bis(N-(1-naphthyl)-N-phenylamino) biphenyl (NPB)/Blue emitting materials/Bathophenanthroline (Bphen)/lithium quinolate (Liq)/Al. All the devices showed efficient blue emissions. Particularly, a device using ‘2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)?7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g] quinoline’ as an emitter showed a maximum external quantum efficiency (EQE) of 4.92% with the Commission Internationale De L’Énclairage (CIE) coordinates of (0.15, 0.10) at 8.0?V.     

Entropy Could Quantify Brain Activation Induced by Mechanical Impedance-Restrained Active Arm Motion: A Functional NIRS Study

Brain activation has been used to understand brain-level events associated with cognitive tasks or physical tasks. As a quantitative measure for brain activation, we propose entropy in place of signal amplitude and beta value, which are widely used, but sometimes criticized for their limitations and shortcomings as such measures. To investigate the relevance of our proposition, we provided 22 subjects with physical stimuli through elbow extension-flexion motions by using our exoskeleton robot, measured brain activation in terms of entropy, signal amplitude, and beta value; and compared entropy with the other two. The results show that entropy is superior, in that its change appeared in limited, well established, motor areas, while signal amplitude and beta value changes appeared in a widespread fashion, contradicting the modularity theory. Entropy can predict increase in brain activation with task duration, while the other two cannot. When stimuli shifted from the rest state to the task state, entropy exhibited a similar increase as the other two did. Although entropy showed only a part of the phenomenon induced by task strength, it showed superiority by showing a decrease in brain activation that the other two did not show. Moreover, entropy was capable of identifying the physiologically important location.     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.     

Role of the interface in multicomponent materials

Studies of the relationship between interfacial structure and mechanical properties in multicomponent materials are reviewed in this article. The following categories are considered for role of the interface in multicomponent systems: Interpenetrating polymer network(IPN), catalytic effect of silane coupling agent, morphological differences of filler surface, particle-particle interaction and particle size of the filler. The interfacial role in terms of the reinforcement mechanism of the composite and the behavior in the melt state is also discussed in the multicomponent system.     

Holography of massive M2-brane theory: non-linear extension

We investigate the gauge/gravity duality between the \(\mathcal{N} = 6\) mass-deformed ABJM theory with \(\hbox {U}_k(N)\times \hbox {U}_{-k}(N)\) gauge symmetry and the 11-dimensional supergravity on LLM geometries with SO(2,1)\(\times \)SO(4)/\({\mathbb {Z}}_k\) \(\times \)SO(4)/\({\mathbb {Z}}_k\) isometry, in terms of a KK holography, which involves quadratic order field redefinitions. We establish the quadratic order KK mappings for various gauge invariant fields in order to obtain the canonical 4-dimensional gravity equations of motion and to reduce the LLM solutions to an asymptotically AdS\(_4\) gravity solutions. The non-linearity of the KK maps indicates that we can observe the true purpose of the non-linear KK holography of the LLM solutions. We read the vacuum expectation value of conformal dimension two operator from the asymptotically AdS\(_4\) gravity solutions. For the LLM solutions which are represented by square-shaped Young diagrams, we compare the vacuum expectation value obtained from the holographic procedure with the result obtained from the field theory, which is given by \(\langle \mathcal{O}^{(\Delta =2)}\rangle =\sqrt{k}N^{\frac{3}{2}}f_{(\Delta =2)}+\mathcal{O}(N)\), where \(f_{\Delta }\) is independent of N. Based on this result, we examine the gauge/gravity duality in the large N limit and finite k. We also show that the vacuum expectation values of the massive KK graviton modes are vanishing as expected by the supersymmetry.     

Investigation of the transverse beam dynamics in the thermal wave model with a functional method

We investigated the transverse beam dynamics in a thermal wave model by using a functional method. It can describe the beam optical elements separately with a kernel for a component. The method can be applied to general quadrupole magnets beyond a thin lens approximation as well as drift spaces. We found that the model can successfully describe the PARMILA simulation result through an FODO lattice structure for the Gaussian input beam without space charge effects.     

Erratum to Formation and control of Au and Ag nanoparticles inside borate glasses using femtosecond laser and heat treatment

We report the spectroscopic properties of femtosecond laser-irradiated sodium-alumino-borate glass doped with silver and gold ions. We precipitated gold and silver nanoparticles by laser irradiation and annealing at 400°C for 30 min. The irradiation and annealing treatment produced different absorption and emission characteristics in Au³⁺ doped and Au³⁺, Ag⁺ codoped glasses, and the possible mechanisms of the observed results are discussed. The size of the nanoparticles was estimated by TEM and absorption band analysis.     

Cage motion of a probe atom in a vacancy complex in Pt

The perturbation function of a Cd probe atom bound in a hydrogen-decorated vacancy complex in Pt is found to exhibit dynamical relaxation at 294 K, as measured by the technique of perturbed γ-γ angular correlations. Based on other characteristics of the complex, a model is proposed for the structure of the complex. In the undecorated state, it consists of a probe atom at the center of a tetrahedron of vacancies in the fcc structure. In the decorated state at low temperature, the probe atom returns to one of the four vacant lattice sites. The relaxation at room temperature is attributed to motion of the probe atom in a cage formed by the four vacant sites.     

New interpretations for noncrossing partitions of classical types

We interpret noncrossing partitions of type B and type D in terms of noncrossing partitions of type A. As an application, we get type-preserving bijections between noncrossing and nonnesting partitions of type B, type C and type D which are different from those in the recent work of Fink and Giraldo. We also define Catalan tableaux of type B and type D, and find bijections between them and noncrossing partitions of type B and type D respectively.     

Magnetized SPR sensor for enhanced functionality

It is known that a magnetic field changes the RI and the SPR angle of specific analytes. We have applied an external magnetic field to a surface plasmon resonance (SPR) sensor to exploit this phenomenon. A gold film is used for excitation of SPR in the sensor with a Kretschmann configuration. According to the concentration of 4-type analyte, we observed unique changes of the SPR angle due to the magnetic field, providing better classification of material type than a conventional SPR sensor.