Peculiarities of the environmental influence on the optical properties of push-pull nonlinear optical molecules: a theoretical study

Gas-phase geometry optimization of NLO-active molecules is one of the standard approaches in the first principle computational methodology, whereas the important role of the environment is usually not considered during the evaluation of structural parameters. With a wide variety of environmentally influenced models in most cases only the high quality single point calculations are prepared. Among different approaches, the most used polarizable continuum model (PCM) seems to be promising. In this study, we have compared the electronic properties of gas-phase optimized geometries of imidazole-derived push-pull compounds with those optimized using PCM solvation approach including CH(2)Cl(2) and PMMA as media. We have focused particularly on the linear optical properties of investigated molecules, namely on the UV-vis absorption spectra. The analysis of presented results shows the applicability of the different quantum chemical (QC) methods for the UV-vis spectra calculations of linear NLO molecules. Herein we also present the need of molecule geometry optimization affected by the environment. Following the performed calculations, the electronic properties of gas-phase optimized molecules give conformable results with respect to those obtained by more time-consuming continuum optimizations. All computational data are supported by experimental investigations.     

Utilization of IR spectral detailed analysis for coordination mode determination in novel Zn-cyclen-aminoacid complexes

The infrared spectra, elemental and thermal (TG/DTG and DTA) analyses of novel [Zn(cyclen-κ4N1,4,7,10)(HGly-κ2O,O')](ClO4)2 (1), and [Zn2(cyclen-κ4N1,4,7,10)2(μ-S-Ala-κ2N,O)](ClO4)(3)·2H2O (2) complexes (cyclen - 1,4,7,10-tetraazacyclododecane) were recorded and analyzed in the relation to their structural peculiarities. IR spectral data indicate both mono- or bidentate coordination mode of a carboxylate group in the prepared complexes (at pH≈9). The results indicate unusual bidentate carboxylate coordination mode (in complex (1)) toward to Zn2+-cyclen unit. Therefore the crystal structure determination of the crystalline complex [Zn(cyclen-κ4N1,4,7,10)(NO3-κ2O,O')](NO3) was attached in order to support the coordination mode assignment in complex (1).     

Vibrational analysis of 1-methyl-pyridinium-2-aldoxime and 1-methyl-pyridinium-4-aldoxime cations

Pyrimidinium aldoximes are administered intravenously in cases of acute organophosphate poisoning. Since questions regarding their morphology and active conformation in the solution are still open, an effort was made to establish correspondence between their crystal state conformers and vibrational spectra, thus facilitating the future work on the assignment of bands in solution. Normal coordinate analysis including the potential energy distribution for all modes was performed for 1-methyl-pyridinium-2-aldoxime (PAM2AN) and 1-methyl-pyridinium-4-aldoxime (PAM4AN) cations (charge=+e, spin=0). Positions of infrared and Raman bands of corresponding chloride salts agree rather well with predicted values, except for modes taking part in hydrogen bonding to anions. The strength of hydrogen bonding is estimated to be of medium strength in both salts, the bonding in PAM2AN being stronger. The calculated and observed values of the characteristic stretching modes for the aldoxime moiety have been in accordance with the stronger acidity of PAM2AN structural isomer.     

Differential scanning calorimetry study of the solidification sequence of austenitic stainless steel

The solidification sequence of austenitic stainless steels can be predicted with thermodynamic calculations. Another way is to use models where the value of the Cr_eq./Ni_eq. ratio determines the relationship between the solidification mode and the composition factor. In this study the solidification of AISI 304LN stainless steel at different cooling rates was studied using differential scanning calorimetry (DSC). The samples were linearly heated above the liquidus temperature to 1550 °C at heating rates of 5, 10, and 25 K/min. The solidification (cooling) scans from 1550 °C involved the same selected ramps. After the DSC measurements the samples were metallographically analyzed to reveal the variations in the solidification microstructures. The microhardness of the solidified samples was also measured. It was found that the cooling rate critically influenced the solidification. The solidification behavior, which depends on the cooling rate, determines the evolution of the microstructure. At the slowest cooling rates a relief-cell morphology was observed, and at the fastest cooling rate the formation of dendrites was evident. With an increasing cooling rate the liquidus temperature decreased and the reaction enthalpy increased.     

Stigmasterol-based novel low molecular weight/mass organic gelators

Conjugates consisting of stigmasterol and L-phenylalanine, interconnected through short-chained dicarboxylic acyls by ester and amide bonds, respectively, were synthesized as potential low molecular weight/mass organic gelators (LMWGs/LMMGs). Their physico-chemical properties were subjected to investigation, especially their ability to form gels reversibly based on changes of the environmental conditions. Other self-assembly properties detectable by UV-VIS traces were measured in systems consisting of two miscible solvents (water/acetonitrile) with varying solvent ratios and using constant concentrations of the studied compounds. Partition and diffusion coefficients and solubility in water were calculated for the target conjugates. The conjugate 3a was the only compound from this series capable of forming a gel in 1-octanol. All three conjugates 3a-3c displayed supramolecular characteristics in the UV-VIS spectra.     

Ruthenium nanoparticles in ionic liquids: structural and stability effects of polar solutes

Ionic liquids are a stabilizing medium for the in situ synthesis of ruthenium nanoparticles. Herein we show that the addition of molecular polar solutes to the ionic liquid, even in low concentrations, eliminates the role of the ionic liquid 3D structure in controlling the size of ruthenium nanoparticles, and can induce their aggregation. We have performed the synthesis of ruthenium nanoparticles by decomposition of [Ru(COD)(COT)] in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C(1)C(4)Im][NTf(2)], under H(2) in the presence of varying amounts of water or 1-octylamine. For water added during the synthesis of metallic nanoparticles, a decrease of the solubility in the ionic liquid was observed, showed by nanoparticles located at the interface between aqueous and ionic phases. When 1-octylamine is present during the synthesis, stable nanoparticles of a constant size are obtained. When 1-octylamine is added after the synthesis, aggregation of the ruthenium nanoparticles is observed. In order to explain these phenomena, we have explored the molecular interactions between the different species using (13)C-NMR and DOSY (Diffusional Order Spectroscopy) experiments, mixing calorimetry, surface tension measurements and molecular simulations. We conclude that the behaviour of the ruthenium nanoparticles in [C(1)C(4)Im][NTf(2)] in the presence of 1-octylamine depends on the interaction between the ligand and the nanoparticles in terms of the energetics but also of the structural arrangement of the amine at the nanoparticle's surface.     

Quantitative analysis of energy transfer between fluorescent proteins in CFP-GBP-YFP and its response to Ca2+

This article reports the full characterisation of the optical properties of a biosynthesised protein consisting of fused cyan fluorescent protein, glucose binding protein and yellow fluorescent protein. The cyan and yellow fluorescent proteins act as donors and acceptors for intramolecular fluorescence resonance energy transfer. Absorption, fluorescence, excitation and fluorescence decays of the compound protein were measured and compared with those of free fluorescent proteins. Signatures of energy transfer were identified in the spectral intensities and fluorescence decays. A model describing the fluorescence properties including energy transfer in terms of rate equations is presented and all relevant parameters are extracted from the measurements. The compound protein changes conformation on binding with calcium ions. This is reflected in a change of energy transfer efficiency between the fluorescent proteins. We track the conformational change and the kinetics of the calcium binding reaction from fluorescence intensity and decay measurements and interpret the results in light of the rate equation model. This visualisation of change in protein conformation has the potential to serve as an analytical tool in the study of protein structure changes in real time, in the development of biosensor proteins and in characterizing protein-drug interactions.     

Trends in water monomer adsorption and dissociation on flat insulating surfaces

The interaction of water with solid surfaces is key to a wide variety of industrial and natural processes. However, the basic principles that dictate how stable and in which state (intact or dissociated) water will be on a given surface are not fully understood. Towards this end, we have used density functional theory to examine water monomer adsorption on the (001) surfaces of a broad range of alkaline earth oxides, alkaline earth sulfides, alkali fluorides, and alkali chlorides. Some interesting general conclusions are arrived at: (i) on all the surfaces considered only a few specific adsorption structures are favoured; (ii) water becomes more stable upon descending the oxide and fluoride series but does not vary much upon going down the chloride and sulfide series; (iii) water is stabilised both by an increase in the lattice constant, which facilitates hydrogen bonding to the substrate, and by the flexibility of the substrate. These are also factors that favour water dissociation. We hope that this study is of some value in better understanding the surface science of water in general, and in assisting in the interpretation and design of future experiments.     

Oxygen-isotope labeled titania: Ti(18)O2

(18)O-isotope labelled titania (anatase, rutile) was synthesized. The products were characterized by Raman spectra together with their quantum chemical modelling. The interaction with carbon dioxide was investigated using high-resolution FTIR spectroscopy, and the oxygen isotope exchange at the Ti(18)O(2)/C(16)O(2) interface was elucidated.