Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

Determination of impurities in uranium oxide by inductively coupled plasma mass spectrometry (ICPMS) by the matrix matching method

An analytical procedure was developed to determine the concentration of some elements regarded as trace impurities in nuclear fuel using inductively coupled plasma mass spectrometry (ICPMS) associated to the matrix matching method. The assessment of this approach was carried out using a set of certified reference materials produced by the New Brunswick Laboratory (NBL). Eighteen out of the twenty-four elements in the reference materials could be easily determined. It was found that the mean values for reproducibility and accuracy were 5.0% and 15.0%. The remaining six elements provided mean values of 11.0% and 37.0%, respectively. They could not be adequately determined due to the effects of analyte signal suppression and spectral interference.     

Collaborative monitoring study of airborne particulate matters among seven Asian countries

Summary Seven Asian countries have been collaborating in collecting airborne particulate matter (APM) in their individual countries and analyzing them by neutron activation analysis as a common analytical tool. APM samples were collected into two fractions of fine and coarse grains (PM2 and PM2-10, respectively). Analytical data were compared from several viewpoints such as particulate sizes, locality of sampling sites (either urban or rural) and geographical location of participating countries. Chemical composition and their monthly variations as well as mass concentrations appear to be highly characteristic for individual sampling sites, suggesting that NAA data are suitable for evaluating the air quality in each site.     

Application of preparative high-speed counter-current chromatography for the separation of flavonoids from the leaves of Byrsonima crassa Niedenzu (IK)

The methanolic extract of the leaves of the medicinal plant Byrsonima crassa (Malpighiaceae) contain flavonoids with antioxidant activity. They were separated in a preparative scale using high-speed counter-current chromatography. The optimum solvent system used was composed of a mixture of ethyl acetate-n-propanol-water (140:8:80 (v/v/v)) and led to a successful separation between monoglucosilated flavonoids (quercetin-3-O-alpha-L-arabinoside, quercetin-3-O-beta-D-galactoside) and the biflavonoid amentoflavone in only 3.5 h. The purities of quercetin-3-O-alpha-L-arabinoside (95 mg), quercetin-3-O-beta-D-galactoside (16 mg) and the biflavonoid amentoflavone (114 mg) were all isolated at purity over 95%. Identification was performed by 1H NMR, 13C NMR and UV analyses.     

Thermal study of CoxZn7-xSb2O12 spinel obtained by pechini method using different alcohols

With the aim of obtaining materials with applications in pigments, Co_xZn_7-xSb₂O₁₂ spinels were synthesized using the Pechini method. This method consists in the formation of a polymeric net, where the metallic cations are homogeneously distributed. In this work, two types of alcohol (ethyl glycol and ethylene glycol) were used for the synthesis of a zinc antimoniate spinel, Co_xZn_7-xSb₂O₁₂ (x=0-7). The materials were characterized by termogravimetry (TG) and differential thermal analysis (DTA). TG results indicated a decrease in total mass loss when cobalt was added to the solution substituting zinc, for samples prepared using the two different alcohols. Decomposition temperatures, obtained by TG and DTA, presented a decreasing behavior as cobalt was added to the material. In relation to the alcohols, all results indicated a better polymerization of the resin when ethylene glycol was used, being the most indicated one for cation immobilization. X-ray diffraction did not show differences between the two alcohols - both presented the spinel phase (Co, Zn)_2.33Sb₀.₆₇O₄. Samples with higher quantity of cobalt also presented ilmenite phase (Co, Zn)Sb₂O₆. This revised version was published online in August 2006 with corrections to the Cover Date.     

Lifetime prediction of ABS polymers based on thermoanalytical data

The service life of ABS polymer, stabilized by 2-(3,5-di-tert-butyl-4-hydroxyanilino)-4,6-bis(octylthio)-1,3,5-triazine and containing 50% of a modifying rubber component, was estimated from oxidative induction times measured by DSC in isothermal mode in the temperature interval 140–170°C. The lifetime of ABS powder at the actual temperature of drying was predicted by linear extrapolation according to Arrhenius. However, the extrapolated value was much longer than the real lifetime determined from the long-term oven aging tests at 70 and 90°C, simulating the industrial drying process. The effect of changes in the apparent activation energy of oxidation due to antioxidant consumption during polymer aging is discussed.     

Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.     

Electron transport in corona charged 12 μm teflon FEP with saturable deep traps

Surface-potential measurements carried out in negatively corona charged 12 m samples of fluorethylenepropylene (Teflon FEP) showed the following characteristics: 1) with a constant charging current, the potential initially rises linearly, and then sublinearly; 2) the potential saturates irrespectively of the charging process and 3) practically no potential decay is observed after switching off the corona. These results have been interpreted in terms of an usual model (field-independent trapping time) for charge transport in insulators, with saturable deep traps in both surface and bulk of the sample and a relatively high electron mobility in order to prevent free-space charge accumulation. The partial differential equations derived from the model are numerically solved and it was found that only the product of the mobility with the trapping time is relevant to the fitting of experimental results, provided that >10^–8 cm²/Vs. A field-dependent trapping time model leads to poorer fittings.