Investigation of the surfactant type and concentration effect on the retention factors of glutathione and its analogues by micellar electrokinetic chromatography

In the present study, a micellar electrokinetic chromatographic method was used to determine the retention factors of hydrophilic monomeric and homodimeric forms of glutathione analogues. Ionic‐liquid‐based surfactant, 1‐tetradecyl‐3‐methylimidazolium chloride, as well as cetyltrimethylammonium bromide and phosphate buffer (pH 7.4) were employed in the experiments. Since the studied peptides possess a negative charge under physiological conditions, it is expected that the peptides interact with the oppositely charged 1‐tetradecyl‐3‐methylimidazolium chloride and cetyltrimethylammonium bromide micelles via hydrophobically assisted electrostatic forces. The dependence of the retention factor on the micellar concentration of 1‐tetradecyl‐3‐methylimidazolium chloride and cetyltrimethylammonium bromide is nonlinear and the obtained curves converge to a limiting value. The retention factor values of GSH analogues were in the range of 0.36–2.22 for glutathione analogues and –1.21 to 0.37 for glutathione when 1‐tetradecyl‐3‐methylimidazolium chloride was used. When cetyltrimethylammonium bromide was employed, the retention factor values were in the range of 0.27–2.17 for glutathione analogues and –1.22 to 0.06 for glutathione. If sodium dodecyl sulfate was used, the retention factor values of glutathione analogues with carnosine moiety were in the range of –1.54 to 0.38.     

Study of Electrochemical Oxidation of Xanthohumol by Ultra-Performance Liquid Chromatography Coupled to High Resolution Tandem Mass Spectrometry and Ion Mobility Mass Spectrometry

Electrochemically assisted oxidation off-line combined with UPLC/ESI–MS and ion mobility mass spectrometry enabled us to gain insight into the oxidation mechanisms of xanthohumol. Several types of monomeric oxidation products were identified, i.e., monohydroxylated and dehydrogenated derivatives and related quinones. Besides, high contents of dimers were observed. The structures of four main oxidative condensation products of two xanthohumol molecules were proposed based on combination of retention time, exact mass measurement, fragmentation pattern, data from on-line ion mobility mass spectrometric experiments and with the support of independent electrochemical experiments. To the best of our knowledge, this is the first evidence on formation of xanthohumol dimers. The effect of the pH on the generation of oxidation products was further investigated. The monomeric and dimeric oxidation products are favored at pH of 5.5 and 4.5, respectively.

     

Click approaches in sol–gel chemistry

The combination of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction with sol–gel processing enables the versatile preparation of sol–gel materials under different shapes with targeted functionalities through a diversity-oriented approach. In this account, the development of the CuAAC reaction under anhydrous conditions for the synthesis of sol–gel precursors and for the assembling of magnetic nanoparticles on self-assembled monolayers is related, as well as the use of the classical CuAAC methodologies for the functionalization of mesoporous silica nanoparticles and microdots arrays. Coupling CuAAC and Sol–Gel will result in simplified preparations of multifunctional materials with controlled morphologies.     

Whole-cell Gluconobacter oxydans biosensor for 2-phenylethanol biooxidation monitoring

A microbial biosensor for 2-phenylethanol (2-PE) based on the bacteria Gluconobacter oxydans was developed and applied in monitoring of a biotechnological process. The cells of G. oxydans were immobilized within a disposable polyelectrolyte complex gel membrane consisting of sodium alginate, cellulose sulphate and poly(methylene-co-guanidine) attached onto a miniaturized Clark oxygen electrode, forming whole cell amperometric biosensor. Measured changes in oxygen concentration were proportional to changes in 2-PE concentration. The biosensor sensitivity was 864 nA mM⁻¹ (RSD = 6%), a detection limit of 1 μM, and the biosensor response towards 2-PE was linear in the range 0.02–0.70 mM. The biosensor preserved 93% of its initial sensitivity after 7 h of continuous operation and exhibited excellent storage stability with loss of only 6% of initial sensitivity within two months, when stored at 4 °C. The developed system was designed and successfully used for an off-line monitoring of whole course of 2-PE biooxidation process producing phenylacetic acid (PA) as industrially valuable aromatic compound. The biosensor measurement did not require the use of hazardous organic solvent. The biosensor response to 2-PE was not affected by interferences from PA and phenylacetaldehyde at concentrations present in real samples during the biotransformation and the results were in a very good agreement with those obtained via gas chromatography.     

Bulk derivatization and cation exchange restricted access media-based trap-and-elute liquid chromatography–mass spectrometry method for determination of trace estrogens in serum

Estrone (E1), estradiols (α/β-E2), and estriol (E3) are four major metabolically active estrogens exerting strong biological activities at very low circulating concentrations. This paper reports a sensitive and efficient method with automated, on-line clean-up and detection to determine trace estrogens in a small volume of serum samples using liquid chromatography–electrospray ionization–tandem mass spectrometry directly, without off-line liquid–liquid or solid-phase extraction pretreatments. Serum aliquots (charcoal stripped fetal bovine serum, 100 μL) were spiked with four estrogen standards and their corresponding isotope-labeled internal standards, then bulk derivatized with 2-fluoro-1-methyl-pyridium p-toluenesulfonate (2-FMP) to establish the calibration curves and perform method validation. Calibration was established in the concentration ranges of 5–1000 pg mL⁻¹, and demonstrated good linearity of R² from 0.9944 to 0.9997 for the four derivatized estrogens. The lower detection limits obtained were 3–7 pg mL⁻¹. Good accuracy and precision in the range of 86–112% and 2.3–11.9%, respectively, were observed for the quality control (QC) samples at low, medium, and high concentration levels. The stability tests showed that the derivatized serum samples were stable 8 h after derivatization at room temperature and at least to 48 h if stored at −20 °C. The method was applied to measure trace estrogens in real human and bovine serum samples, and three of four estrogen compounds studied were observed and quantified.     

Total and Semi‐Syntheses of Antimicrobial Thuggacin Derivatives

The total and semi‐synthesis of 13 new macrolactones derived from thuggacin, which is a secondary metabolite from the myxobacterium Sorangium cellulosum, are reported. The thuggacins have attracted much attention due to their strong antibacterial activity, particularly towards Mycobacterium tuberculosis. This study focuses on 1) thuggacin derivatives that cannot equilibrate by transacylation between the three natural thuggacins A–C, 2) the roles of the thiazole ring, and 3) the hexyl side chain at C2. Semi‐synthetic O‐methylation at C17 suppressed the transacylations without a substantial loss of antibacterial activity. Exchanging the C17–C25 side chain for simplified hydrophobic chains led to complete loss of antibacterial activity. Exchange of the thiazole by an oxazole ring or removal of the hexyl side chain at C2 had no substantial effect on the biological properties.     

A Synthetic Route to Chiral Dihydrobenzothiazines through Ring Opening of Activated Aziridines with 2‐Halothiophenols/Copper‐Powder‐Mediated C−N Cyclization

A simple protocol for the synthesis of dihydrobenzothiazines through regio‐ and stereoselective S_N2‐type ring opening of N‐tosylaziridines with sulfur nucleophiles followed by copper‐powder‐mediated intramolecular C?N cyclization in excellent yields (up to 95 %) with high diastereo‐ and enantioselectivity (up to >99 %) is reported.     

Interfacing of microbial cells with nanoparticles: Simple and cost-effective preparation of a highly sensitive microbial ethanol biosensor

Various types of carbon nanoparticles were directly mixed with microbial cells of Gluconobacter oxydans within a 3-D bionanocomposite in order to prepare a highly sensitive ethanol biosensor with a short response time. From all carbonaceous nanomaterials tested, single- or multi-walled carbon nanotubes provided the highest sensitivity of detection (117–121 µA cm^?2 mM^?1), but from a practical point of view, Ketjen black 300 and 600 provide very low detection limit (2–6 µM) and high sensitivity for the ethanol analysis (84–88 µA cm^?2 mM^?1)with a shortresponse time (14–33 s). Moreover, the price of Ketjen black is a few orders of magnitude lower compared to that of carbon nanotubes. Finally, the study showed that the morphology of nanoparticles rather than their surface modification is the key element in achieving high sensitivity of ethanol detection.