Anchoring of copper complex in MCM-41 matrix: a highly efficient catalyst for epoxidation of olefins by tert-BuOOH

A complex moiety containing copper (II) has been anchored covalently into the organic-modified Si-MCM-41 to prepare a new catalyst. The amine group containing organic moiety 3-aminopropyl-triethoxysilane has been first anchored on the surface of Si-MCM-41 via silicon alkoxide route. The amine group upon condensation with salicyldehyde affords a bidentate ligand in the mesoporous matrix for anchoring copper(II) ions. The prepared catalyst has been characterized by UV-vis, electron paramagnetic resonance (EPR), and infrared (IR) spectroscopic analysis, small-angle X-ray diffraction, and N2 sorption study. A remarkable difference in the pore structure has been observed after the immobilization of copper(II) complex in Si-MCM-41. The catalyst showed excellent catalytic efficiency in epoxidation reactions with various olefinic compounds including styrene and allyl alcohol, using tert-BuOOH as oxidant. Notably, styrene shows unprecedented high conversion (97%) as well as epoxide selectivity (89%) with tert-BuOOH over the Cu-MCM-41 catalyst.     

Implementation of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the simultaneous determination of halogenated contaminants and polycyclic aromatic hydrocarbons in fish

In the presented study, comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC?×?GC-TOFMS) was shown to be a powerful tool for the simultaneous determination of various groups of contaminants including 18 polychlorinated biphenyls (PCBs), seven polybrominated diphenyl ethers (PBDEs), and 16 polycyclic aromatic hydrocarbons (PAHs). Since different groups of analytes (traditionally analyzed separately) were included into one instrumental method, significant time savings were achieved. Following the development of an integrated sample preparation procedure for an effective and rapid isolation of several groups of contaminants from fish tissue, the GC?×?GC-TOFMS instrumental method was optimized to obtain the best chromatographic resolution and low quantification limits (LOQs) of all target analytes in a complex mixture. Using large-volume programmable temperature vaporization, the following LOQs were achieved-PCBs, 0.01-0.25 μg/kg; PBDEs, 0.025-5 μg/kg; PAHs 0.025-0.5 μg/kg. Furthermore, several capillary column combinations (BPX5, BPX50, and Rxi-17Sil-ms in the first dimension and BPX5, BPX50, Rt-LC35, and HT8 in the second dimension) were tested during the experiments, and the optimal separation of all target analytes even of critical groups of PAHs (group (a): benz[a]anthracene, cyclopenta[cd]pyrene and chrysene; group (b): benzo[b]fluoranthene, benzo[j]fluoranthene and benzo[k]fluoranthene; group (c): dibenz[ah]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was observed on BPX5?×?BPX50 column setup. Moreover, since the determination of target analytes was performed using TOFMS detector, further identification of other non-target compounds in real life samples was also feasible.     

Stable cellulose nanospheres for cellular uptake

Pure, perfectly spherical cellulose nanoparticles with sizes of ≈80-260 nm can be prepared by dialysis starting from trimethylsilylcellulose (TMSC). The aqueous suspensions obtained are storable for several months. Subsequent covalent labeling of the cellulose nanoparticles with FITC has no influence on particle size, shape, and stability. The particles can be sterilized and suspended in biological media without structural changes. Incorporation of FITC-labeled cellulose nanoparticles into living human fibroblasts is studied using confocal LSM. In contrast to cellulose nanocrystals, fast cellular uptake is found for the nanospheres without transfection reagents or attachment of a receptor molecule. This suggests an influence of the geometry of biocompatible nanomaterials on endocytosis.     

Native polyacrylamide electrophoresis in the presence of Ponceau Red to study oligomeric states of protein complexes

Native polyacrylamide electrophoresis in the presence of two reversible protein anionic stains (Ponceau S and Ponceau 2R) was used to study the oligomeric states of soluble proteins. A mild binding of the used protein stains to nondissociated protein oligomers imposed a charge shift on the proteins resulting into separation of protein species according to their size under physiological conditions. Adsorbed stains could be easily removed after electrophoresis by washing of polyacrylamide gel with buffer and protein complexes could be visualized either by the detection of their enzyme activity or by using a nonspecific protein stain. The specific detection of enzyme activity of glycosidases, lactate dehydrogenase, or phosphatases was shown as an example.     

A novel, environmentally friendly dispersive liquid-liquid microextraction procedure for the determination of copper

A novel, simple and environmentally friendly procedure for copper determination has been developed. The method is based on the formation of an ion associate of Cu(I) with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydroindol-2-ylidene)-penta-1,3-dienyl]-3H-indolium (DIDC) in the presence of chloride ions as ligand, followed by dispersive liquid-liquid microextraction (DLLME) of the formed ion associate into organic phase and UV-Vis spectrophotometric detection. The following experimental conditions were used: pH 3, 0.24 mol L^− 1 chloride ions, 0.06 mmol L^− 1 DIDC. The effect of the nature of the extraction solvent, auxiliary solvent and disperser solvent used was studied. A mixture of amyl acetate, tetrachloromethane, and methanol in a 1:1:3 v/v/v ratio was selected for the DLLME procedure. The absorbance of the coloured extracts at 640 nm wavelength obeys Beer's law in the range 0.020-0.090 mg L^− 1 of Cu. The limit of detection calculated from a blank test (n = 10) based on 3s is 0.005 mg L^− 1 of Cu. The developed procedure was applied to the analysis of water samples. The suggested DLLME is compared with two procedures previously reported from our laboratory based on (1) conventional liquid-liquid extraction, and (2) sequential injection extraction performed in a dual-valve sequential injection system. The advantages and disadvantages of each method are discussed.     

Utilization of Slovak bentonites in deposition of high-level radioactive waste and spent nuclear fuel

The basic strategic aims in the field of managing high-level radioactive waste and liquidation of nuclear power plants are all contained in the Energy policy of the Slovak Republic. Its aim is to resolve the concept of the backside of the nuclear energetics fuel cycle??long-term deposition of high-level radioactive waste and spent nuclear fuel (SNF). The most important form of high-level radioactive waste and SNF long-term deposition is their deposition in deep geological formations created by natural as well as engineering barriers used to isolate the long-lived radionuclides from the biosphere. The basic components of these barriers are clays, of which bentonite is generally referred to as the most suitable clay material. There are a few significant bentonite deposits in the Slovak Republic: Jel?ový potok, Kopernica, Lastovce, Lieskovec, Dolná Ves. The review article summarizes the information on geotechnical properties of Slovak bentonites published up-to-date, which is inevitable to know for the intention of their use. It highlights the advantages and shows drawbacks of five Slovak deposits. It suggests further research direction, to draw a thorough hydraulical, microbial and radiation profile of Slovak bentonites.     

Secondary ion mass spectrometry and alpha-spectrometry of electrodeposited thorium films

The main aim of this work was the preparation of samples with thorium content on the steel discs by electrodeposition for determination of natural thorium isotope by alpha spectrometry and secondary ion mass spectrometry and finding out their possible linear correlation between these methods. The analysis of the composition of surface was other aim of study. Discs were measured by alpha spectrometer. After that, alpha spectrometry discs were analyzed by TOF-SIMS IV, which is installed in the International Laser Centre in Bratislava. The integral and normalized intensities of isotope of ²³²Th and intensities of ions of ThO⁺, ThOH⁺, ThO₂H⁺, Th₂O₄H⁺, ThO₂ ^?, ThO₃H^?, ThH₃O₃ ^? a ThN₂O₅H^? were measured. The linear correlation is between surface’s weights of Th and intensities of ions of Th⁺ from identified in SIMS spectra. We found out the chemical binding between thorium and oxygen and hydrogen on the surface of samples by SIMS method. Obtained intensities of ions ²³²ThO⁺, ²³²ThOH⁺, ²³²ThO₂H⁺ prove the presence of oxidized forms of thorium in the upper layers of surface. The oxidized ions predominate in univalent form of thorium up to deep about 3,000 nm.     

Determination of activation effect of Ca(OH)<Subscript>2</Subscript> upon the hydration of BFS and related heat by isothermal calorimeter

Isothermal conduction calorimetry, differential thermal analysis (DTA)–thermogravimetric analysis (TG) analysis, and SEM observations have proved the activation effect of Ca(OH)₂ released from the C₃S hydration upon blast furnace slag (BFS). Five sample mixtures of BFS and C₃S and two samples of pure BFS and C₃S were submitted to reaction with water inside the calorimeter at room temperature. The values of hydration heat were recorded up to 7 days. Samples were stored in humidity during 28 days and then were submitted to DTA–TG and SEM analysis. The effect of Ca(OH)₂ upon heat evolution of sample mixtures has been quantified and its influence upon the formation of new hydrates and microstructure of pastes was evidenced.     

Sulfonyl Nitrene and Amidyl Radical: Structure and Reactivity

Photocatalytic generation of nitrenes and radicals can be used to tune or even control their reactivity. Photocatalytic activation of sulfonyl azides leads to the elimination of N₂ and the resulting reactive species initiate C−H activations and amide formation reactions. Here, we present reactive radicals that are generated from sulfonyl azides: sulfonyl nitrene radical anion, sulfonyl nitrene and sulfonyl amidyl radical, and test their gas phase reactivity in C−H activation reactions. The sulfonyl nitrene radical anion is the least reactive and its reactivity is governed by the proton coupled electron transfer mechanism. In contrast, sulfonyl nitrene and sulfonyl amidyl radicals react via hydrogen atom transfer pathways. These reactivities and detailed characterization of the radicals with vibrational spectroscopy and with DFT calculations provide information necessary for taking control over the reactivity of these intermediates.