Synthesis of Pyrimidine Annelated Heterocycles [1]. Regioselective Heterocyclization of 6-Cyclopent-2-enyl-5-hydroxy-1,3-dimethyl-pyrimidine-2,4( 1H, 3H)-dione and 5-Cyclopent-2-enyl-6-hydroxy-1,3-dimethylpyrimidine-2,4( 1H, 3H)-dione

Summary. Two hitherto unreported pyrimidine annelated heterocycles were synthesized from 6-cyclopent-2-enyl-5-hydroxy-1,3-dimethylpyrimidine-2,4(1H,3H)-dione and 5-cyclopent-2-enyl-6-hydroxy-1,3-dimethylpyrimidine-2,4(1H,3H)-dione by reaction with pyridine hydrotribromide or hexamethylenetetramine hydrotribromide. The first one was also obtained by reaction with concentrated sulfuric acid.Received October 28, 2002; accepted October 30, 2002 Published online June 2, 2003     

Preparation,quality control and stability of <Superscript>99m</Superscript>Tc-cefuroxime axetil

Cefuroxime axetil, a cephalosporin antibiotic used to treat bacterial infections, was investigated to label with ^99mTc. Radiolabeling of cefuroxime axetil was carried out by using stannous chloride method. Effects of pH and stannous chloride amount on the radiolabeling yield were investigated. The radiochemical purity of ^99mTc-cefuroxime axetil was determined by thin layer radio chromatography (TLRC), electrophoresis and high performance liquid chromatography. The maximum radiolabeling yield was 98±1%.     

Determination of chondroitin sulfate content in raw materials and dietary supplements by high-performance liquid chromatography with ultraviolet detection after enzymatic hydrolysis: single-laboratory validation

A method to quantify chondroitin sulfate in raw materials and dietary supplements at a range of about 5 to 100% (w/w) chondroitin sulfate has been developed and validated. The chondroitin sulfate is first selectively hydrolyzed by chondroitinase ACII enzyme to form un-, mono-, di-, and trisulfated unsaturated disaccharides; the resulting disaccharides are then quantified by ion-pairing liquid chromatography with ultraviolet detection. The amounts of the individual disaccharides are summed to yield the total amount of chondroitin sulfate in the material. Single-laboratory validation has been performed to determine the repeatability, accuracy, selectivity, limit of detection, limit of quantification, ruggedness, and linearity of the method. Repeatability precision for total chondroitin sulfate content was between 1.60 and 4.72% relative standard deviation, with HorRat values between 0.79 and 2.25. Chondroitin sulfate recovery from raw material negative control was between 101 and 102%, and recovery from finished product negative control was between 105 and 106%.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

“Anti-electrostatic” halogen bonding in solution

Halogen-bonded (XB) complexes between halide anions and a cyclopropenylium-based anionic XB donor were characterized in solution for the first time. Spontaneous formation of such complexes confirms that halogen bonding is sufficiently strong to overcome electrostatic repulsion between two anions. The formation constants of such “anti-electrostatic” associations are comparable to those formed by halides with neutral halogenated electrophiles. However, while the latter usually show charge-transfer absorption bands, the UV-Vis spectra of the anion–anion complexes examined herein are determined by the electronic excitations within the XB donor. The identification of XB anion–anion complexes substantially extends the range of the feasible XB systems, and it provides vital information for the discussion of the nature of this interaction.

Spontaneous formation of “anti-electrostatic” complexes in solution demonstrates that halogen bonding can be sufficiently strong to overcome anion–anion repulsion when the latter is attenuated by the polar medium.

Halogen bonding (XB) is an attractive interaction between a Lewis base (LB) and a halogenated compound, exhibiting an electrophilic region on the halogen atom.¹ It is most commonly related to electrostatic interaction between an electron-rich species (XB acceptor) and an area of positive electrostatic potential (σ-holes) on the surface of the halogen substituent in the electrophilic molecule (XB donor).² Provided that mutual polarization of the interacting species is taken into account, the σ-hole model explains geometric features and the variation of stabilities of XB associations, especially in the series of relatively weak complexes.³ Based on the definition of halogen bonding and its electrostatic interpretation, this interaction is expected to involve either cationic or neutral XB donors. Electrostatic interaction of anionic halogenated species with electron-rich XB acceptors, however, seems to be repulsive, especially if the latter are also anionic. Yet, computational analyses predicted that halogen bonding between ions of like charges, called “anti-electrostatic” halogen bonding (AEXB),⁴ can possibly be formed^5–12 and the first examples of AEXB complexes formed by different anions, i.e. halide anions and the anionic iodinated bis(dicyanomethylene)cyclopropanide derivatives 1 (see Scheme 1) or the anionic tetraiodo-p-benzoquinone radical, were characterized recently in the solid state.^13,14 The identification of such complexes substantially extends the range of feasible XB systems, and it provides vital information for the discussion of the nature of this interaction. Computational results, however, significantly depend on the used methods and applied media (gas phase vs. polar environment and solvation models) and the solid state arrangements of the XB species might be affected by crystal forces and/or counterions. Unambiguous confirmation of the stability of the halogen-bonded anion–anion complexes and verification of their thermodynamic characteristics thus requires experimental characterization of the spontaneous formation of such associations in solution. Still, while the solution-phase complexes formed by hydrogen bonding between two anionic species were reported previously,^15–17 there is currently no example of “anti-electrostatic” XB in solution.Open in a separate windowScheme 1Structures of the XB donor 1 and its hydrogen-substituted analogue 2.To examine halogen bonding between two anions in solution, we turn to the interaction between halides and 1,2-bis(dicyanomethylene)-3-iodo-cyclopropanide 1 (Scheme 1).^‡ Even though this compound features a cationic cyclopropenylium core, it is overall anionic, and calculations have demonstrated that its electrostatic potential is universally negative across its entire surface.¹³ The solution of 1 (with tris(dimethylamino)cyclopropenium (TDA) as counterion) in acetonitrile is characterized by an absorption band at 288 nm with ε = 2.3 × 10⁴ M⁻¹ cm⁻¹ (Fig. 1). As LB, we first applied iodide anions taken as a salt with n-tetrabutylammonium counter-ion, Bu₄NI. This salt does not show absorption bands above 290 nm, but its addition to a solution of 1 led to a rise of absorption in the 290–350 nm range (Fig. 1). Subtraction of the absorption of the individual components from that of their mixture produced a differential spectrum which shows a maximum at about 301 nm (insert in Fig. 1). At constant concentration of the XB donor (1) and constant ionic strength, the intensity of the absorption in the range of 280–300 nm (and hence differential absorbance, ΔAbs) rises with increasing iodide concentration (Fig. S1 in the ESI^†). This suggests that the interaction of iodide with 1 results in the formation of the [1, I⁻]-complex which shows a higher absorptivity in this spectral range (eqn (1)):1 + X⁻ ⇌ [1, X⁻]1Open in a separate windowFig. 1Spectra of acetonitrile solutions with constant concentration of 1 (0.60 mM) and various concentrations of Bu₄NI (6.0, 13, 32, 49, 75, 115 and 250 mM, solid lines from the bottom to the top). The dashed lines show spectra of the individual solutions 1 (c = 0.60 mM, red line) and Bu₄NI (c = 250 mM, blue line). The ionic strength was maintained using Bu₄NPF₆. Insert: Differential spectra of the solutions obtained by subtraction of the absorption of the individual components from the spectra of their corresponding mixtures.To clarify the mode of interaction between 1 and iodide in the complex, we also performed analogous measurements with the hydrogen-substituted compound 2 (see Scheme 1). The addition of iodide to a solution of 2 in acetonitrile did not increase the absorption in the 280–300 nm spectral range. Instead, some decrease of the absorption band intensity of 2 with the increase of concentration of I⁻ anions was observed (Fig. S2 in the ESI^†). Such changes are related to a blue shift of this band resulting from the hydrogen bonding between 2 and iodide (formation of hydrogen-bonded [2, I⁻] complex is corroborated by the observation of the small shift of the NMR signal of the proton of 2 to the higher ppm values in the presence of I⁻ anions, see Fig. S3 in the ESI^†).^§ Furthermore, since H-compound 2 should be at least as suitable as XB donor 1 to form anion–π complexes with the halide, this finding (as well as solid-state and computational data^¶) rules out that any increase in absorption in this region observed with the I-compound 1 may be due to this alternative interaction.Likewise, the addition of NBu₄I to a solution of TDA cations taken as a salt with Cl⁻ anions did not result in an increase in the relevant region. Hence, we could also rule out anion–π interactions with the TDA counter-ions as source of the observed changes, which is in line with previous reports on the electron-rich nature of TDA.¹⁸All these observations (supported by the computational analysis, vide infra) indicate that the [1, I⁻] complex (eqn (1)) is formed via halogen bonding of I⁻ with iodine substituents in 1. The changes in the intensities of the differential absorption ΔAbs as a function of the iodide concentration (with constant concentration of XB donor (1) as well as constant ionic strength) are well-modelled by the 1 : 1 binding isotherm (Fig. S1 in the ESI^†). The fit of the absorption data produced a formation constant of K = 15 M⁻¹ for the [1, I⁻] complex (Table 1).^|| The overlap with the absorption of the individual XB donor hindered the accurate evaluation of the position and intensity of the absorption band of the corresponding complex which is formed upon LB-addition to 1. As such, the values of Δλ_max shown in Table 1 represent a wavelength of the largest difference in the absorptivity of the [1, I⁻] complex and individual anion 1, and Δε reflects the difference of their absorptivity at this point (see the ESI^† for the details of calculations).Equilibrium constants and spectral characteristics of the complexes of 1 with halide anions X⁻

Speciation analysis of mercury in sediments, zoobenthos and river water samples by high-performance liquid chromatography hyphenated to atomic fluorescence spectrometry following preconcentration by solid phase extraction

A high-pressure microwave digestion was applied for microwave-assisted extraction (MAE) of mercury species from sediments and zoobenthos samples. A mixture containing 3 mol L⁻¹ HCl, 50% aqueous methanol and 0.2 mol L⁻¹ citric acid (for masking co-extracted Fe³⁺) was selected as the most suitable extraction agent. The efficiency of proposed extraction method was better than 95% with R.S.D. below 6%. A preconcentration method utilizing a “homemade” C18 solid phase extraction (SPE) microcolumns was developed to enhance sensitivity of the mercury species determination using on-column complex formation of mercury-2-mercaptophenol complexes. Methanol was chosen for counter-current elution of the retained mercury complexes achieving a preconcentration factor as much as 1000. The preconcentration method was applied for the speciation analysis of mercury in river water samples. The high-performance liquid chromatography-cold vapour atomic fluorescence spectrometric (HPLC/CV-AFS) method was used for the speciation analysis of mercury. The complete separation of four mercury species was achieved by an isocratic elution of aqueous methanol (65%/35%) on a Zorbax SB-C18 column (4.6 mm × 150 mm, 5 μm) using the same complexation reagent (2-mercaptophenol). The limits of detection were 4.3 μg L⁻¹ for methylmercury (MeHg⁺), 1.4 μg L⁻¹ for ethylmercury (EtHg⁺), 0.8 μg L⁻¹ for inorganic mercury (Hg²⁺), 0.8 μg L⁻¹ for phenylmercury (PhHg⁺).     

Stereoselective total synthesis of protected sulfamisterin and its analogues

The stereoselective synthesis of sulfamisterin I and its unnatural analogues II and V in their protected form was achieved through a common strategy. The Wittig reaction of aldehydes VIII and IX with the C₁₄ hydrophobic side-chain X served as the key C-C connecting transformation. Subsequent functional group inter-conversions in the coupling products XI and XX completed the total synthesis.     

Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.     

Self-Assembled Monolayers of Molecular Conductors with Terpyridine-Metal Redox Switching Elements: A Combined AFM,STM and Electrochemical Study

Self-assembled monolayers (SAMs) of terpyridine-based transition metal (ruthenium and osmium) complexes, anchored to gold substrate via tripodal anchoring groups, have been investigated as possible redox switching elements for molecular electronics. An electrochemical study was complemented by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) methods. STM was used for determination of the SAM conductance values, and computation of the attenuation factor β from tunneling current–distance curves. We have shown that SAMs of Os-tripod molecules contain larger adlayer structures compared with SAMs of Ru-tripod molecules, which are characterized by a large number of almost evenly distributed small islands. Furthermore, upon cyclic voltammetric experimentation, Os-tripod films rearrange to form a smaller number of even larger islands, reminiscent of the Ostwald ripening process. Os-tripod SAMs displayed a higher surface concentration of molecules and lower conductance compared with Ru-tripod SAMs. The attenuation factor of Os-tripod films changed dramatically, upon electrochemical cycling, to a higher value. These observations are in accordance with previously reported electron transfer kinetics studies.     

Implementation of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the simultaneous determination of halogenated contaminants and polycyclic aromatic hydrocarbons in fish

In the presented study, comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC?×?GC-TOFMS) was shown to be a powerful tool for the simultaneous determination of various groups of contaminants including 18 polychlorinated biphenyls (PCBs), seven polybrominated diphenyl ethers (PBDEs), and 16 polycyclic aromatic hydrocarbons (PAHs). Since different groups of analytes (traditionally analyzed separately) were included into one instrumental method, significant time savings were achieved. Following the development of an integrated sample preparation procedure for an effective and rapid isolation of several groups of contaminants from fish tissue, the GC?×?GC-TOFMS instrumental method was optimized to obtain the best chromatographic resolution and low quantification limits (LOQs) of all target analytes in a complex mixture. Using large-volume programmable temperature vaporization, the following LOQs were achieved-PCBs, 0.01-0.25 μg/kg; PBDEs, 0.025-5 μg/kg; PAHs 0.025-0.5 μg/kg. Furthermore, several capillary column combinations (BPX5, BPX50, and Rxi-17Sil-ms in the first dimension and BPX5, BPX50, Rt-LC35, and HT8 in the second dimension) were tested during the experiments, and the optimal separation of all target analytes even of critical groups of PAHs (group (a): benz[a]anthracene, cyclopenta[cd]pyrene and chrysene; group (b): benzo[b]fluoranthene, benzo[j]fluoranthene and benzo[k]fluoranthene; group (c): dibenz[ah]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was observed on BPX5?×?BPX50 column setup. Moreover, since the determination of target analytes was performed using TOFMS detector, further identification of other non-target compounds in real life samples was also feasible.