Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes

In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium-based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10-50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.     

Accuracy and sensitivity of the determination of rate constants of interconversion in achiral and chiral environments by dynamic enantioselective electrophoresis

The method for determination of rate constants of interconversion of enantiomers in chiral and achiral environments of a dynamic enantioseparation system was investigated in order to reveal its accuracy, sensitivity and robustness. Two significantly different enantioseparation systems were selected, one with a single (well-defined) chiral selector (CS) and the second with a mixture of CSs, and the rate constants of interconversion for these two systems were compared statistically. While the rate constants of interconversion in the chiral environment were found to be significantly different, the rate constants in achiral environment were confirmed to be statistically the same. The accuracy of the method was independent of experimental conditions. Influence of a CS and temperature on the rate of interconversion were discussed within the scope of determined thermodynamic parameters and statistical evaluation. A certain temperature may exist at which two different types of CSs influence the rate of interconversion equally while the extent of their influence may largely differ at other temperatures.     

Patterning of sol gel thin films by capillary force assisted soft lithographic technique

Patterning of sol gel based silica and silica–titania films has been developed at room temperature by soft lithographic technique. Corresponding metal alkoxides have been utilized for the preparation of precursor sols. Elastomeric stamps of polydimethylsiloxane (PDMS) are used to emboss patterns of a master grating on the as-prepared silica and silica–titania films obtained by sol gel process. Pressure-less capillary force lithography has been used to fabricate both 1-D and 2-D ordered structures of simple stripe patterns. A modified solvent assisted lithography and micro-molding in capillaries yielded stable and high fidelity 1-D structures for silica and silica–titania films over a large area.     

TPR investigations on the reducibility of Cu supported on Al2O3, zeolite Y and SAPO-5

Reducibility of Cu supported on Al₂O₃, zeolite Y and silicoaluminophosphate SAPO-5 has been investigated in dependence on the Cu content using a method combining conventional temperature programmed reduction (TPR) by hydrogen with reoxidation in N₂O followed by a second the so-called surface-TPR (s-TPR). The method enables discrimination and a quantitative estimation of the Cu oxidation states +2, +1 and 0. The quantitative results show that the initial oxidation state of Cu after calcination in air at 400 °C, independent on the nature of the support, is predominantly +2. Cu²⁺ supported on Al₂O₃ is quantitatively reduced by hydrogen to metallic Cu⁰. Comparing the TPR of the samples calcined in air and that of samples additionally pre-treated in argon reveals that in zeolite Y and SAPO-5 Cu²⁺ cations are stabilized as weakly and strongly forms. In both systems, strongly stabilized Cu²⁺ ions are not auto-reduced by pre-treatment in argon at 650 °C, but are reduced in hydrogen to form Cu⁺. The weakly stabilized Cu²⁺ ions, in contrast, may be auto-reduced by pre-treatment in argon at 650 °C forming Cu⁺ but are reduced in hydrogen to metallic Cu⁰.     

A novel, environmentally friendly dispersive liquid-liquid microextraction procedure for the determination of copper

A novel, simple and environmentally friendly procedure for copper determination has been developed. The method is based on the formation of an ion associate of Cu(I) with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydroindol-2-ylidene)-penta-1,3-dienyl]-3H-indolium (DIDC) in the presence of chloride ions as ligand, followed by dispersive liquid-liquid microextraction (DLLME) of the formed ion associate into organic phase and UV-Vis spectrophotometric detection. The following experimental conditions were used: pH 3, 0.24 mol L^− 1 chloride ions, 0.06 mmol L^− 1 DIDC. The effect of the nature of the extraction solvent, auxiliary solvent and disperser solvent used was studied. A mixture of amyl acetate, tetrachloromethane, and methanol in a 1:1:3 v/v/v ratio was selected for the DLLME procedure. The absorbance of the coloured extracts at 640 nm wavelength obeys Beer's law in the range 0.020-0.090 mg L^− 1 of Cu. The limit of detection calculated from a blank test (n = 10) based on 3s is 0.005 mg L^− 1 of Cu. The developed procedure was applied to the analysis of water samples. The suggested DLLME is compared with two procedures previously reported from our laboratory based on (1) conventional liquid-liquid extraction, and (2) sequential injection extraction performed in a dual-valve sequential injection system. The advantages and disadvantages of each method are discussed.     

A dispersive liquid-liquid microextraction procedure for determination of boron in water after ultrasound-assisted conversion to tetrafluoroborate

A novel, simple and green procedure is presented for the determination of boron. The method is based on ultrasound-assisted conversion of boron to tetrafluoroborate anion and the formation of an ion pair between BF₄⁻ and Astra Phloxine reagent (R), followed by dispersive liquid-liquid microextraction of the ion pair formed and subsequent UV-vis spectrophotometric detection. The conversion of boron to tetrafluoroborate anion is performed in an acidic medium of 0.9 mol L⁻¹ H₂SO₄ in the presence of 0.1 mol L⁻¹ F^- by means of 10 min of ultrasonication. The extraction of the ion pair formed between BF₄⁻ and R (1 × 10⁻⁴ mol L⁻¹ R) is carried out by dispersive liquid-liquid microextraction using 0.5 mL of amyl acetate (as extraction solvent), tetrachloromethane (as auxiliary solvent) and acetonitrile (as dispersive solvent) in a ratio of 1:1:2. The absorbance of the coloured extracts obeys Beer's law in the range 0.22-18.7 mg L⁻¹ of B(III) at 553 nm wavelength. The limit of detection calculated from a blank test (n = 10) based on 3 s is 0.015 mg L⁻¹ of B(III). The method was applied to the determination of boron in mineral waters.     

Supramolecular templating in kirromycin biosynthesis: the acyltransferase KirCII loads ethylmalonyl-CoA extender onto a specific ACP of the trans-AT PKS

In the biosynthesis of complex polyketides, acyltransferase domains (ATs) are key determinants of structural diversity. Their specificity and position in polyketide synthases (PKSs) usually controls the location and structure of building blocks in polyketides. Many bioactive polyketides, however, are generated by trans-AT PKSs lacking internal AT domains. They were previously believed to use mainly malonyl-specific free-standing ATs. Here, we report a mechanism of structural diversification, in which the trans-AT KirCII regiospecifically incorporates the unusual extender unit ethylmalonyl-CoA in kirromycin polyketide biosynthesis.     

Anti-malarial, anti-algal, anti-tubercular, anti-bacterial, anti-photosynthetic, and anti-fouling activity of diterpene and diterpene isonitriles from the tropical marine sponge Cymbastela hooperi

In an investigation into their potential ecological role(s), a group of mainly diterpene isonitriles, nine in total, isolated from the tropical marine sponge Cymbastela hooperi, and the sesquiterpene axisonitrile-3, isolated from the tropical marine sponge Acanthella kletra, were evaluated in a series of bioassays including anti-fouling, anti-algal, anti-photosynthetic, anti-bacterial (Gram +ve and -ve), anti-fungal, and anti-tubercular. The results of these assays showed that all of the tested compounds, with the exception of diterpene 9, were active in at least two of the applied test systems, with axisonitrile-3 (10) and diterpene isonitrile 1 being the two most active compounds overall, closely followed by diterpene isonitrile 3. Based on the results of the photosynthetic study a molecular modelling investigation was undertaken with all of the compounds used in that study. The results showed a positive correlation between reduction in photosynthetic activity and the interaction of the modelled compounds with a potential enzyme active site.     

Dinuclear silver(I) complexes for the design of metal-ligand networks based on triazolopyrimidines

Silver(I) coordination complexes with the versatile and biomimetic ligands 1,2,4-triazolo[1,5-a]pyrimidine (tp), 5,7-dimethyl-1,2,4-triazolo[1,5-a]pyrimidine (dmtp) and 7-amine-1,2,4-triazolo[1,5-a]pyrimidine (7atp) all feature dinuclear [Ag(2)(μ-tp)(2)](2+) building units (where tp is a triazolopyrimidine derivative), which are the preferred motif, independently of the counter-anion used. According to AIM (atoms in molecules) and ELF (electron localization function) analyses, this fact is due to the great stability of these dinuclear species. The complexes structures range from the dinuclear entities [Ag(2)(μ-tp)(2)(CH(3)CN)(4)](BF(4))(2) (1), [Ag(2)(μ-tp)(2)(CH(3)CN)(4)](ClO(4))(2) (2), [Ag(2)(μ-7atp)(2)](ClO(4))(2) (3) and [Ag(2)(μ-dmtp)(2)(CH(3)CN)](PF(6))(ClO(4)) (4) over the 1D polymer chain [Ag(2)(μ-CF(3)SO(3))(2)(μ-dmtp)(2)](n) (5) to the 3D net {[Ag(2)(μ(3)-tp)(2)](PF(6))(2)·～6H(2)O}(n) (6) with NbO topology.     

Stable cellulose nanospheres for cellular uptake

Pure, perfectly spherical cellulose nanoparticles with sizes of ≈80-260 nm can be prepared by dialysis starting from trimethylsilylcellulose (TMSC). The aqueous suspensions obtained are storable for several months. Subsequent covalent labeling of the cellulose nanoparticles with FITC has no influence on particle size, shape, and stability. The particles can be sterilized and suspended in biological media without structural changes. Incorporation of FITC-labeled cellulose nanoparticles into living human fibroblasts is studied using confocal LSM. In contrast to cellulose nanocrystals, fast cellular uptake is found for the nanospheres without transfection reagents or attachment of a receptor molecule. This suggests an influence of the geometry of biocompatible nanomaterials on endocytosis.