A novel, environmentally friendly dispersive liquid-liquid microextraction procedure for the determination of copper

A novel, simple and environmentally friendly procedure for copper determination has been developed. The method is based on the formation of an ion associate of Cu(I) with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydroindol-2-ylidene)-penta-1,3-dienyl]-3H-indolium (DIDC) in the presence of chloride ions as ligand, followed by dispersive liquid-liquid microextraction (DLLME) of the formed ion associate into organic phase and UV-Vis spectrophotometric detection. The following experimental conditions were used: pH 3, 0.24 mol L^− 1 chloride ions, 0.06 mmol L^− 1 DIDC. The effect of the nature of the extraction solvent, auxiliary solvent and disperser solvent used was studied. A mixture of amyl acetate, tetrachloromethane, and methanol in a 1:1:3 v/v/v ratio was selected for the DLLME procedure. The absorbance of the coloured extracts at 640 nm wavelength obeys Beer's law in the range 0.020-0.090 mg L^− 1 of Cu. The limit of detection calculated from a blank test (n = 10) based on 3s is 0.005 mg L^− 1 of Cu. The developed procedure was applied to the analysis of water samples. The suggested DLLME is compared with two procedures previously reported from our laboratory based on (1) conventional liquid-liquid extraction, and (2) sequential injection extraction performed in a dual-valve sequential injection system. The advantages and disadvantages of each method are discussed.     

Utilization of Slovak bentonites in deposition of high-level radioactive waste and spent nuclear fuel

The basic strategic aims in the field of managing high-level radioactive waste and liquidation of nuclear power plants are all contained in the Energy policy of the Slovak Republic. Its aim is to resolve the concept of the backside of the nuclear energetics fuel cycle??long-term deposition of high-level radioactive waste and spent nuclear fuel (SNF). The most important form of high-level radioactive waste and SNF long-term deposition is their deposition in deep geological formations created by natural as well as engineering barriers used to isolate the long-lived radionuclides from the biosphere. The basic components of these barriers are clays, of which bentonite is generally referred to as the most suitable clay material. There are a few significant bentonite deposits in the Slovak Republic: Jel?ový potok, Kopernica, Lastovce, Lieskovec, Dolná Ves. The review article summarizes the information on geotechnical properties of Slovak bentonites published up-to-date, which is inevitable to know for the intention of their use. It highlights the advantages and shows drawbacks of five Slovak deposits. It suggests further research direction, to draw a thorough hydraulical, microbial and radiation profile of Slovak bentonites.     

Secondary ion mass spectrometry and alpha-spectrometry of electrodeposited thorium films

The main aim of this work was the preparation of samples with thorium content on the steel discs by electrodeposition for determination of natural thorium isotope by alpha spectrometry and secondary ion mass spectrometry and finding out their possible linear correlation between these methods. The analysis of the composition of surface was other aim of study. Discs were measured by alpha spectrometer. After that, alpha spectrometry discs were analyzed by TOF-SIMS IV, which is installed in the International Laser Centre in Bratislava. The integral and normalized intensities of isotope of ²³²Th and intensities of ions of ThO⁺, ThOH⁺, ThO₂H⁺, Th₂O₄H⁺, ThO₂ ^?, ThO₃H^?, ThH₃O₃ ^? a ThN₂O₅H^? were measured. The linear correlation is between surface’s weights of Th and intensities of ions of Th⁺ from identified in SIMS spectra. We found out the chemical binding between thorium and oxygen and hydrogen on the surface of samples by SIMS method. Obtained intensities of ions ²³²ThO⁺, ²³²ThOH⁺, ²³²ThO₂H⁺ prove the presence of oxidized forms of thorium in the upper layers of surface. The oxidized ions predominate in univalent form of thorium up to deep about 3,000 nm.     

Determination of activation effect of Ca(OH)<Subscript>2</Subscript> upon the hydration of BFS and related heat by isothermal calorimeter

Isothermal conduction calorimetry, differential thermal analysis (DTA)–thermogravimetric analysis (TG) analysis, and SEM observations have proved the activation effect of Ca(OH)₂ released from the C₃S hydration upon blast furnace slag (BFS). Five sample mixtures of BFS and C₃S and two samples of pure BFS and C₃S were submitted to reaction with water inside the calorimeter at room temperature. The values of hydration heat were recorded up to 7 days. Samples were stored in humidity during 28 days and then were submitted to DTA–TG and SEM analysis. The effect of Ca(OH)₂ upon heat evolution of sample mixtures has been quantified and its influence upon the formation of new hydrates and microstructure of pastes was evidenced.     

Sulfonyl Nitrene and Amidyl Radical: Structure and Reactivity

Photocatalytic generation of nitrenes and radicals can be used to tune or even control their reactivity. Photocatalytic activation of sulfonyl azides leads to the elimination of N₂ and the resulting reactive species initiate C−H activations and amide formation reactions. Here, we present reactive radicals that are generated from sulfonyl azides: sulfonyl nitrene radical anion, sulfonyl nitrene and sulfonyl amidyl radical, and test their gas phase reactivity in C−H activation reactions. The sulfonyl nitrene radical anion is the least reactive and its reactivity is governed by the proton coupled electron transfer mechanism. In contrast, sulfonyl nitrene and sulfonyl amidyl radicals react via hydrogen atom transfer pathways. These reactivities and detailed characterization of the radicals with vibrational spectroscopy and with DFT calculations provide information necessary for taking control over the reactivity of these intermediates.     

Optical Modulation of Antibiotic Resistance by Photoswitchable Cystobactamids

The rise of antibiotic resistance causes a serious health care problem, and its counterfeit demands novel, innovative concepts. The combination of photopharmacology, enabling a light-controlled reversible modulation of drug activity, with antibiotic drug design has led to first photoswitchable antibiotic compounds derived from established scaffolds. In this study, we converted cystobactamids, gyrase-inhibiting natural products with an oligoaryl scaffold and highly potent antibacterial activities, into photoswitchable agents by inserting azobenzene in the N-terminal part and/or an acylhydrazone moiety near the C-terminus, yielding twenty analogs that contain mono- as well as double-switches. Antibiotic and gyrase inhibition properties could be modulated 3.4-fold and 5-fold by light, respectively. Notably, the sensitivity of photoswitchable cystobactamids towards two known resistance factors, the peptidase AlbD and the scavenger protein AlbA, was light-dependent. While irradiation of an analog with an N-terminal azobenzene with 365 nm light led to less degradation by AlbD, the AlbA-mediated inactivation was induced. This provides a proof-of-principle that resistance towards photoswitchable antibiotics can be optically controlled.     

Structure of Zinc and Nickel Histidine Complexes in Solution Revealed by Molecular Dynamics and Raman Optical Activity

The histidine residue has an exceptional affinity for metals, but solution structure of its complexes are difficult to study. For zinc and nickel complexes, Raman and Raman optical activity (ROA) spectroscopy methods to investigate the link between spectral shapes and the geometry were used. The spectra were recorded and interpreted on the basis of ionic equilibria, molecular dynamics, ab initio molecular dynamics, and density functional theory. For zwitterionic histidine the dominant tautomer was determined by the decomposition of experimental spectra into calculated subspectra. An octahedral structure was found to prevail for the ZnHis₂ complex in solution, in contrast to a tetrahedral arrangement in the crystal phase. The solution geometry of NiHis₂ is more similar to the octahedral structure found by X-ray. The Raman and ROA structural determinations of metal complexes are dependent on extensive computations, but reveal unique information about the studied systems.     

Monitoring of circulating amino acids in patients with pancreatic cancer and cancer cachexia using capillary electrophoresis and contactless conductivity detection

Branched chain amino acids (BCAAs), alanine and glutamine are determined in human plasma by capillary electrophoresis with contactless conductivity detection (CE/C⁴D). The baseline separation of five amino acids from other plasma components is achieved on the short capillary effective length of 18 cm in 3.2 mol/L acetic acid with addition of 13% v/v methanol as background electrolyte. Migration times range from 2.01 min for valine to 2.84 min for glutamine, and LODs for untreated plasma are in the interval 0.7–0.9 μmol/L. Sample treatment is based on the addition of acetonitrile to only 15 μL of plasma and supernatant is directly subjected to CE/C⁴D. Circulating amino acids are measured in patients with pancreatic cancer and cancer cachexia during oral glucose tolerance test. It is shown that patients with pancreatic cancer and cancer cachexia syndrome exhibit low basal circulating BCAAs and glutamine levels and loss of their insulin-dependent suppression.     

Ultrasound as a Promising Tool for the Green Extraction of Specialized Metabolites from Some Culinary Spices

Spices are a popular food of plant origin, rich in various phytochemicals and recognized for their numerous properties. The aim of the study was to evaluate the antioxidant and antimicrobial activity, as well as the content of specialized metabolites, of aqueous extracts of three spice species––garlic (Allium sativum L.), ginger (Zingiber officinalle L.) and turmeric (Curcuma longa L.)––prepared by green extraction methods. Ultrasound treatment increased the chromaticity parameter b value of turmeric and ginger extracts, thus indicating a higher yellow color predominantly due to curcuminoids characteristic of these species. Ultrasound-assisted extraction significantly increased the content of total soluble solids, phenolic compounds, total carotenoids and vitamin C. The temperature of the system was also an important factor, with the highest (70 °C) conditions in ultrasound-assisted extraction having a positive effect on thermolabile compounds (vitamin C, phenolics, total carotenoids). For example, turmeric extract treated with ultrasound at 70 °C had up to a 67% higher vitamin C content and a 69.4% higher total carotenoid content compared to samples treated conventionally at the same temperature, while ginger extracts had up to 40% higher total phenols. All different concentrations of spice extracts were not sufficient for complete inhibition of pathogenic bacterial strains of Salmonella, L. monocytogenes and S. aureus; however, only garlic extracts had an effect on slowing down the growth and number of L. monocytogenes colonies. Spice extracts obtained by ultrasonic treatment contained a significantly higher level of bioactive compounds and antioxidant capacity, suggesting that the extracts obtained have significant nutritional potential and thus a significant possibility for phytotherapeutic uses.