Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

Interaction of DNA bases with silver nanoparticles: assembly quantified through SPRS and SERS

Colloidal silver nanoparticles were prepared by reducing silver nitrate with sodium borohydride. The synthesized silver particles show an intense surface plasmon band in the visible region. The work reported here describes the interaction between nanoscale silver particles and various DNA bases (adenine, guanine, cytosine, and thymine), which are used as molecular linkers because of their biological significance. In colloidal solutions, the color of silver nanoparticles may range from red to purple to orange to blue, depending on the degree of aggregation as well as the orientation of the individual particles within the aggregates. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and absorption spectroscopy were used to characterize the assemblies. DNA base-induced differential silver nanoparticle aggregation was quantified from the peak separation (relates to color) of surface plasmon resonance spectroscopy (SPRS) and the signal intensity of surface-enhanced Raman scattering (SERS), which rationalize the extent of silver-nucleobase interactions.     

Enantioselective reductions of [m] ferrocenophanones

Enantioselective reductions of prochiral ferrocenophane ketones were investigated. Oxazaborolidine mediated reduction led to corresponding chiral alcohols generally in good yields and enantioselectivities up to 97% ee. Ruthenium-catalyzed transfer hydrogenation was rather unsuccessful in reducing cyclic ferrocene ketones. Proline-derived activator together with trichlorosilane also proved to be an effective method for some substrates (up to 99% ee). Pronounced tendency of α-ferrocenyl ketones toward reductive deoxygenation was studied by DFT computational methods.     

The efficient preparation of α-substituted serine scaffolds as the chiral building blocks for the synthesis of SPT inhibitors

An efficient stereoselective synthesis of unusual substituted serine synthons 7, 10, 12 is reported. It was shown that highly functionalized furanose 6 has the suitable structure for further synthetic manipulations toward the inhibitors of SPT.     

Autofocusing and ESI-MS analysis of protein digests in a miniaturized multicompartment electrolyzer

Free-solution IEF of protein digests was studied in a newly introduced MicroRotofortrade mark multicompartment electrolyzer. The fractionation was performed in a cylindrical separation chamber divided into ten compartments with or without the addition of carrier ampholytes. In the case of autofocusing mode of operation, the tryptic digest itself served as the mixture of ampholytes leading to the separation of the peptides with well-defined pI's. The focusing process was monitored visually using colored pI markers. The resulting fractions from both modes of the separation were analyzed by CE and electrospray-TOF mass spectrometer using electrospray tips microfabricated in polyimide. Additional experiments, aiming at visualization of the mass flux within the focusing compartments were performed using isotachophoretic migration of color cationic tracers. The study considered the autofocusing of both the peptides with well-defined narrow pI's as well as those showing negligible net charge in a broader pH range. Although not all peptides in the protein digests have well-defined pI's the autofocusing process can preseparate many of them leading to higher S/N in the ESI-MS signals and improved protein sequence coverage.     

Automated measurement of permeation and dissolution of propranolol HCl tablets using sequential injection analysis

Aim of this study was to automate sampling and quantification of the previously described apparatus for combined determination of dissolution and permeation through Caco-2 monolayer by means of sequential injection analysis (SIA). Native fluorescence of propranolol HCl in Krebs-Ringer buffer (KRB) was used for quantification. Sampling was done at three different locations within the apparatus at a high sampling frequency (approximately 60 h⁻¹). Injection volume delivered to the fluorescence detector was 50 μL for permeation monitoring and 25 μL for dissolution monitoring. Linear regression for 50 μL injection yielded a detection limit calculated as 0.04 μg mL⁻¹ of propranolol HCl in KRB (R² > 0.999). However, linearity for dissolution monitoring was not given for the complete range of concentrations and first order polynomial calibration was established (R² > 0.9999). To conclude, the SIA system was able to monitor simultaneously dissolution and permeation of the immediate release propranolol HCl tablets and the authors succeeded in automating the apparatus for combined measurement of dissolution and permeation. In addition, the obtained data was consistent with data obtained by manual sampling followed by HPLC analysis.     

High-throughput quantification of lincomycin traces in fermentation broth of genetically modified Streptomyces spp. Comparison of ultra-performance liquid chromatography and high-performance liquid chromatography with UV detection

A new separation and quantification method using ultra-performance liquid chromatography (UPLC) with UV detection was developed for detection of lincomycin traces in fermentation broth of different Streptomyces spp. A similar high-performance liquid chromatography (HPLC) protocol was simultaneously developed for comparison purposes. Both methods were validated and showed a linear range of detector response for quantification of lincomycin in concentration from 3.125 to 1000.0 microgml(-1) with correlation coefficient 0.999 and recoveries ranging from 81.5 to 89.85% with precision < or =5%. Compared with the HPLC, the UPLC method offered high sample throughput and about 10 times lower consumption of solvents. The developed assays were used for determination of lincomycin production in genetically manipulated production strain Streptomyces lincolnensis and for determination of lincomycin production after heterologous expression of lincomycin biosynthetic gene cluster in non-producing strain Streptomyces coelicolor.     

Dry grinding of Ca and octadecyltrimethylammonium montmorillonite

Structural changes in Ca and octadecyltrimethylammonium (ODTMA) montmorillonite induced by dry grinding in a high-energy planetary ball mill were investigated by X-ray powder diffraction (XRD) analysis, infrared (IR) spectroscopy, and scanning electron microscopy (SEM). The organomontmorillonite is more resistant toward mechanical destruction than the Ca form. Both XRD and IR analyses indicate a complete breakdown of the mineral layers after 5 min of grinding of Ca-JP. The XRD pattern of the ODTMA clay shows disappearance of the layer ordering along the c axis after 40 min of grinding, while persistence of the layered structure for all tested samples is proven by the IR spectroscopy. The grinding process affects chemical bonds in the OH, SiOAl, and SiOSi groups of montmorillonite; however, no changes are observed for CH bonds of the organocations. In contrast to the Ca form, all absorption bands typical for montmorillonite appear in the IR spectrum of the ODTMA montmorillonite even after 40 min of grinding. The majority of the bands are undetectable in the spectrum of Ca montmorillonite ground for 5 min. Amorphization of the montmorillonite caused by an intense grinding process is markedly slower after replacing the inorganic cations with the long-chain alkylammonium cations.