Mechanical and anti‐stabbing properties of modified thermoplastic polymers impregnated multiaxial p‐aramid fabrics

New forms of hybrid multiaxial nanocomposites with enhanced mechanical and stab resisting properties are presented. This study is motivated by the lack of knowledge in the study of the multiaxial fabric nanocomposites with two modified thermoplastic matrices for antiballistic protection. Introduction of 5 wt.% silica nanoparticles in the composite of polyurethane/p‐aramid/poly (vinyl butyral) leads to significant improvement in mechanical properties, and the addition of silane as a coupling agents and glutaraldehyde as a crosslinking agents yielded maximal values of storage modulus, tensile modulus and anti‐stabbing properties for hybrid nanocomposites. Ballistic resistance testing and penetration depth of the hybrid nanocomposites were visualized using image analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Recognition of anions and monocarboxylic acids by a fluorescent guanidine-based receptor

A guanidine-based fluorescent receptor has been synthesised to study its binding behaviour towards anions (F^? , Cl^? , Br^? , I^?  and AcO^? ). The two donor N–H bonds of the receptor do not point in the same direction; rather, one N–H bond is intramolecularly hydrogen-bonded with the carbonyl oxygen atom. The nature of the donor–acceptor (DA) arrangement induces moderate binding properties. The binding behaviour towards monocarboxylic acids (benzoic acid and phenylacetic acid) is also compared. The binding behaviour of receptor 1 towards the F^?  anion is higher among the anions studied, whereas in the case of monocarboxylic acid, the binding constant with phenylacetic acid is higher than benzoic acid.     

Hydration of high alumina cement–silica fume composite with addition of Portland cement or sodium polyphosphate under hydrothermal treatment

Various hydrothermal curing regimes were used to investigate the hydration and physical characteristics of two kinds of inorganic binder composites: high alumina cement–silica fume–Portland cement and high alumina cement–silica fume–sodium polyphosphate. Simultaneous thermal analysis (DTA and TG) was used to identify temperature ranges of thermal decomposition of cured samples and to characterize the nature of hydrate products. Two kinds of products are formed. The first ones consist of C₃AH₆, AH₃, calcium carbonate (C–C) as a product of carbonation, and C₃AH_1.5 resulted from the partial decomposition of C₃AH₆ under higher hydrothermal pressure. The second ones are the products formed by acid–base reaction between monocalcium aluminate and sodium polyphosphate to form NaCaPO₄·xH₂O and Al₂O₃·xH₂O that could convert to chemically bonded ceramic binders like hydroxyapatite (Ca₅(PO₄)₃OH) and gibbsite (Al(OH)₃). These two hydroceramic products formed under these conditions act also as binder and could be useful as cement binders for the protection of petroleum, gas, or geothermal wells. Mercury intrusion porosimeter was used for the estimation of the pore structure parameters of the composites. It turned up that longer curing time coupled with higher hydrothermal pressure has improved the pore structure of the first composite, while that of the second has remained unchanged.     

Calorimetric study and thermal analysis of Al–Sn system

The results of calorimetric study and thermal analysis of binary Al–Sn system are presented in this paper. The Oelsen calorimetry was used in thermodynamic analysis. Following thermodynamic properties were determined at 727 °C: activities, activity coefficients, partial/integral molar Gibbs excess, and mixing energies. The energetics of mixing in liquid Al–Sn alloys has been analyzed through the study of concentration fluctuation in the long-wavelength limit. Thermal analysis of selected alloys in Al–Sn system was done using differential thermal analysis. Defined characteristic phase transition temperatures were used for comparison with calculated phase diagram of investigated system. Good agreement with available literature data was obtained. Structural analysis of selected alloys was done using optic microscopy.     

Gas chromatography–triple quadrupole tandem mass spectrometry: a powerful tool for the (ultra)trace analysis of multiclass environmental contaminants in fish and fish feed

A new method for rapid determination of 73 target organic environmental contaminants including 18 polychlorinated biphenyls, 16 organochlorinated pesticides, 14 brominated flame retardants and 25 polycyclic aromatic hydrocarbons in fish and fish feed using gas chromatography coupled with triple quadrupole tandem mass spectrometry (GC–MS/MS) was developed and validated. GC–MS/MS in electron ionization mode was shown to be a powerful tool for the (ultra)trace analysis of multiclass environmental contaminants in complex matrices, providing measurements with high selectivity and sensitivity. Another positive aspect characterizing the newly developed method is a substantial simplification of the sample preparation, which was achieved by an ethyl acetate QuEChERS (quick, easy, cheap, effective, rugged and safe) based extraction followed by silica minicolumn clean-up. With use of this sample preparation approach the sample laboratory throughput was increased not only because six samples may be prepared in approximately 1 h, but also because all the above-mentioned groups of contaminants can be determined in a single GC–MS/MS run. Under the optimized conditions, the recoveries of all target analytes in both matrices were within the range from 70 to 120 % and the repeatabilities were 20 % or less. The method quantification limits were in the range from 0.005 to 1 μg kg^–1 and from 0.05 to 10 μg kg^–1 for fish muscle tissue and fish feed, respectively. The developed method was successfully applied to the determination of halogenated persistent organic pollutants and polycyclic aromatic hydrocarbons in fish and fish feed samples.     

Detection and characterization of silver nanoparticles in chicken meat by asymmetric flow field flow fractionation with detection by conventional or single particle ICP-MS

A method of analysis of silver nanoparticles (AgNPs) in chicken meat was developed. The homogenized chicken meat sample, which was spiked with AgNPs, was subjected to enzymolysis by Proteinase K for 40 min at 37 °C. Transmission electron microscopy and inductively coupled plasma mass spectrometry (ICP-MS) in single particle mode were used to characterize the number-based size distribution of AgNPs in the meat digestate. Because similar size distributions were found in the meat digestate and in the aqueous suspension of AgNPs used for spiking the meat, it was shown that no detectable dissolution of the AgNPs took place during the sample preparation stage. The digestate was injected into the asymmetric flow field flow fractionation (AF⁴) -ICP-MS system, which enabled fractionation of nanoparticles from the remaining meat matrix, and resulted in one large peak in the fractograms as well as two smaller peaks eluting close to the void volume. The recovery of silver contained in the large AgNP peak was around 80 %. Size determination of AgNPs in the meat matrix, based on external size calibration of the AF⁴ channel, was hampered by non-ideal (early elution) behavior of the AgNPs. Single particle ICP-MS was applied for determination of the number-based particle size distribution of AgNPs in collected fractions. The presented work describes for the first time the coupling of AF⁴ and ICP-MS for AgNP separation in a food matrix.     

Speciation of gadolinium in surface water samples and plants by hydrophilic interaction chromatography hyphenated with inductively coupled plasma mass spectrometry

Hydrophilic interaction chromatography (HILIC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) was optimized for speciation analysis of gadolinium-based contrast agents in environmental samples, in particular surface river waters and plants. Surface water samples from the Teltow channel, near Berlin, were investigated over a distance of 5 km downstream from the influx of a wastewater treatment plant. The total concentration of gadolinium increased significantly from 50 to 990 ng?L^?1 due to the influx of the contrast agents. After complete mixing with the river water, the concentration remained constant over a distance of at least 4 km. Two main substances [Dotarem® (Gd-DOTA) and Gadovist® (Gd-BT-DO3A)] have been identified in the river water using standards. A gadolinium-based contrast agent, possibly Gd-DOTA (Dotarem®), was also detected in water plant samples taken from the Teltow channel. Therefore, uptake of contrast agents [Gadovist® (Gd-BTDO3A), Magnevist® (Gd-DTPA), Omniscan® (Gd-DTPA-BMA), Dotarem® (Gd-DOTA), and Multihance® (Gd-BOPTA)] by plants was investigated in a model experiment using Lepidium sativum (cress plants). HILIC–ICP-MS was used for identification of different contrast agents, and a first approach for quantification using aqueous standard solutions was tested. For speciation analysis, all investigated contrast agents could be extracted from the plant tissues with a recovery of about 54 % for Multihance® (Gd-BOPTA) up to 106 % for Gadovist® (Gd-BT-DO3A). These experiments demonstrate that all contrast agents investigated are transported from the roots to the leaves where the highest content was measured.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Studies in Competitive [3,3] Sigmatropic Rearrangement: Synthesis of Oxygen Heterocycles

[3,3] Sigmatropic rearrangement of unsymmetrically substituted 1,4-but-2-ynes exhibit preference for rearrangement on the aryloxy prop-2-ynyl moiety to N-methyl-N-pyrimidinyl amino prop-2-ynyl moiety in case of 5-substituted uracils (la-f).     

One-Step Protection-Free Synthesis of 3-Aryl-5-hydroxyalkyl-1,2,4-oxadiazoles as Building Blocks

A simple and straightforward synthesis of 3-aryl-5-hydroxyalkyl-1,2,4-oxadiazoles is described. The reaction among arylamidoximes, ethyl glycolate or ethyl lactate, and potassium carbonate in refluxing toluene afforded the desired 1,2,4-oxadiazoles in moderate to good yields. The synthesis has been accomplished in a single step, avoiding protection–deprotection protocols.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.