Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Determination of antioxidant activity using oxidative damage to plasmid DNA — pursuit of solvent optimization

Oxidative stress plays a key role in the pathophysiology of many diseases. Hydroxyl radical is the oxidative species most commonly causing damage to cells. The aim of this work was to optimize the method for antioxidant activity determination on a model lipophilic geranylated flavanone, diplacone. This method uses protection of plasmid DNA from oxidation by a hydroxyl radical generated by the Fenton reaction involving oxidation of metal ions using H₂O₂ and ascorbate. The method was optimized for lipophilic compounds using several solvents and co-solvents. It was found that (2-hydroxypropyl)-β-cyclodextrin (0.1 mass % aq. sol.) is the best co-solvent for our model lipophilic compound to measure the antioxidant activity by the method presented. Other solvents, namely dimethyl sulfoxide, Cremophor EL® (0.1 mass % aq. sol.), ethanol, and methanol, were not suitable for the determination of the antioxidant activity by the method described. Tween 80 (0.1 mass % aq. sol.) and a mixture of 10 vol. % ethanol and 9 mass % bovine serum albumin (aq. sol.) significantly decreased the antioxidant activity of the model lipophilic compound and thus were not suitable for this method.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

Combining ferrocene,thiophene and a boronic acid: a hybrid ligand for reagentless electrochemical sensing of cis-diols

A redox-active affinity ligand suitable for reagentless sensing of cis-diols was synthesised and characterised. 4-[(Ferrocenylamino)methyl]thiophene-3-boronic acid (FcTBA) was allowed to interact with the model cis-diol, sorbitol. A discrete, cathodic shift of the redox potential was observed upon interaction of FcTBA with sorbitol thus providing simultaneous differentiation between the free and bound forms of this sensor molecule. Similar behaviour was observed also for FcTBA co-immobilised with thiophene in a mixed self-assembled monolayer on a gold electrode.     

Recognition of chiral anions using calix[4]arene-based ureido receptor in the 1,3-alternate conformation

A new type of calixarene-based receptor designed for the recognition of chiral anions was prepared by the introduction of (S)-2-methylbutan-1-ol moieties into the lower rim of calixarene. The immobilization of calixarene skeleton in the 1,3-alternate conformation enabled the construction of a cavity consisting of preorganised ureido functions and chiral substituents in close proximity. This cavity is capable of chiral discrimination of selected anions as demonstrated on d- and l-phenylalaninates.     

Raman micro‐spectroscopy for quantitative thickness measurement of nanometer thin polymer films

The sensitivity of far‐field Raman micro‐spectroscopy was investigated to determine quantitatively the actual thickness of organic thin films. It is shown that the thickness of organic films can be quantitatively determined down to 3 nm with an error margin of 20% and down to 1.5 nm with an error margin of 100%. Raman imaging of thin‐film surfaces with a far‐field optical microscope establishes the distribution of a polymer with a lateral resolution of ~400 nm and the homogeneity of the film. Raman images are presented for spin‐coated thin films of polysulfone (PSU) with average thicknesses between 3 and 50 nm. In films with an average thickness of 43 nm, the variation in thickness was around 5% for PSU. In films with an average thickness of 3 nm for PSU, the detected thickness variation was 100%. Raman imaging was performed in minutes for a surface area of 900 µm². The results illustrate the ability of far‐field Raman microscopy as a sensitive method to quantitatively determine the thickness of thin films down to the nanometer range. Copyright © 2015 John Wiley & Sons, Ltd.     

Radical Reactivity of the Biradical [⋅P(μ-NTer)2P⋅] and Isolation of a Persistent Phosphorus-Cantered Monoradical [⋅P(μ-NTer)2P-Et]

The activation of C−Br bonds in various bromoalkanes by the biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) (Ter=2,6-bis-(2,4,6-trimethylphenyl)-phenyl) is reported, yielding trans-addition products of the type [Br−P(μ-NTer)₂P−R] ( 2 ), so-called 1,3-substituted cyclo-1,3-diphospha-2,4-diazanes. This addition reaction, which represents a new easy approach to asymmetrically substituted cyclo-1,3-diphospha-2,4-diazanes, was investigated mechanistically by different spectroscopic methods (NMR, EPR, IR, Raman); the results suggested a stepwise radical reaction mechanism, as evidenced by the in-situ detection of the phosphorus-centered monoradical [⋅P(μ-NTer)₂P-R].< To provide further evidence for the radical mechanism, [⋅P(μ-NTer)₂P-Et] ( 3Et ⋅) was synthesized directly by reduction of the bromoethane addition product [Br-P(μ-NTer)₂P-Et] ( 2 a ) with magnesium, resulting in the formation of the persistent phosphorus-centered monoradical [⋅P(μ-NTer)₂P-Et], which could be isolated and fully characterized, including single-crystal X-ray diffraction. Comparison of the EPR spectrum of the radical intermediate in the addition reaction with that of the synthesized new [⋅P(μ-NTer)₂P-Et] radical clearly proves the existence of radicals over the course of the reaction of biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) with bromoethane. Extensive DFT and coupled cluster calculations corroborate the experimental data for a radical mechanism in the reaction of biradical [⋅P(μ-NTer)₂P⋅] with EtBr. In the field of hetero-cyclobutane-1,3-diyls, the demonstration of a stepwise radical reaction represents a new aspect and closes the gap between P-centered biradicals and P-centered monoradicals in terms of radical reactivity.     

Total Synthesis of Resveratrone and iso-Resveratrone

The first total synthesis of resveratrone and iso-resveratrone based on an epoxide olefination approach is described. The pivotal reaction proceeds by insertion of the lithiated epoxide into a boronic ester and subsequent syn-elimination. Resveratrone has been described to have remarkable photophysical properties, including two-photon absorption. Therefore, an azide derivative has been prepared to allow for use as a biological label.     

A General and Highly Selective Palladium‐Catalyzed Hydroamidation of 1,3‐Diynes

A chemo‐, regio‐, and stereoselective mono‐hydroamidation of (un)symmetrical 1,3‐diynes is described. Key for the success of this novel transformation is the utilization of an advanced palladium catalyst system with the specific ligand Neolephos. The synthetic value of this general approach to synthetically useful α‐alkynyl‐α, β‐unsaturated amides is showcased by diversification of several structurally complex molecules and marketed drugs. Control experiments and density‐functional theory (M06L‐SMD) computations also suggest the crucial role of the substrate in controlling the regioselectivity of unsymmetrical 1,3‐diynes.