Bonding Properties of a Novel Inorganometallic Complex, Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) (iPr-DAB = N,N'-Diisopropyl-1,4-diaza-1,3-butadiene), and its Stable Radical-Anion, Studied by UV-Vis, IR, and EPR Spectroscopy, (Spectro-) Electrochemistry, and Density Functional Calculations

Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) was synthesized and characterized by UV-vis, IR, (1)H NMR, (13)C NMR, (119)Sn NMR, and mass (FAB(+)) spectroscopies and by single-crystal X-ray diffraction, which proved the presence of a nearly linear Sn-Ru-Sn unit. Crystals of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB).3.5C(6)H(6) form in the triclinic space group P&onemacr; in a unit cell of dimensions a = 11.662(6) ?, b = 13.902(3) ?, c = 19.643(2) ?, alpha = 71.24(2) degrees, beta = 86.91(4) degrees, gamma = 77.89(3) degrees, and V = 2946(3) ?(3). One-electron reduction of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) produces the stable radical-anion [Ru(SnPh(3))(2)(CO)(2)(iPr-DAB)](*-) that was characterized by IR, and UV-vis spectroelectrochemistry. Its EPR spectrum shows a signal at g = 1.9960 with well resolved Sn, Ru, and iPr-DAB (H, N) hyperfine couplings. DFT-MO calculations on the model compound Ru(SnH(3))(2)(CO)(2)(H-DAB) reveal that the HOMO is mainly of sigma(Sn-Ru-Sn) character mixed strongly with the lowest pi orbital of the H-DAB ligand. The LUMO (SOMO in the reduced complex) should be viewed as predominantly pi(H-DAB) with an admixture of the sigma(Sn-Ru-Sn) orbital. Accordingly, the lowest-energy absorption band of the neutral species will mainly belong to the sigma(Sn-Ru-Sn)-->pi(iPr-DAB) charge transfer transition. The intrinsic strength of the Ru-Sn bond and the delocalized character of the three-center four-electron Sn-Ru-Sn sigma-bond account for the inherent stability of the radical anion.     

Polyethene with pendant fullerene moieties

Polyethene with fullerene moieties pendant on short-chain branches was prepared by the catalytic copolymerization of ethene and a fullerene-containing vinylic comonomer, yielding polyethene copolymers containing up to 25 wt% of C60.     

Intercalation of Dyes Containing SO3H Groups into Zn–Al Layered Double Hydroxide

The intercalates of Naphthol Yellow S, Tropaeolin 000, and Tropaeolin 00 were prepared by heating [Zn_0.67Al_0.33(OH)₂](CO₃)_0.165 · 0.5H₂O with acidic forms of the dye solutions in an open reaction vessel. The intercalates were characterized by chemical and thermal analysis, X-ray powder diffraction and UV–VIS spectroscopy. A possible arrangement of the dye molecules in the intercalates was suggested on the basis of their chemical compositions and interlayer distances, by taking into account van der Waals dimensions of the guest molecules and by assuming that the structure of the host layers is not changed during the intercalation process.     

Composting and biodegradation of thermally processed feather keratin polymer

Proteins obtained from agricultural sources represent a unique feedstock from which to prepare thermally processable polymers. In this study, thermally processed feather keratin films were composted with three-month-old compost inoculum in self-heating laboratory composters for 30 days and temperature and carbon dioxide development monitored. About 24% of the available carbon in the feather keratin polymer (FKP) was metabolized in this time and this may not be high enough for some applications. Degradation of the feather keratin polymers was observed within 10 days with concurrent molecular weight reduction measured using FT-IR. Visual inspection of the polymers also showed destruction of the films. A change in crystallinity was observed in DSC analysis and some degradation processes could be inferred from this as well.     

Formation of tetra(ethylene oxide) terminated Si-C linked monolayers and their derivatization with glycine: an example of a generic strategy for the immobilization of biomolecules on silicon

Surface modification with oligo(ethylene oxide) functionalized monolayers terminated with reactive headgroups constitutes a powerful strategy to provide specific coupling of biomolecules with simultaneous protection from nonspecific adsorption on surfaces for the preparation of biorecognition interfaces. To date, oligo(ethylene oxide) functionalized monolayer-forming molecules which can be activated for attachment of biomolecules but which can selectively form monolayers onto hydrogen terminated silicon have yet to be developed. Here, self-assembled monolayers (SAMs) containing tetra(ethylene oxide) moieties protected with tert-butyl dimethylsilyl groups were formed by thermal hydrosilylation of alkenes with single-crystal Si(111)-H. The protection group was used to avoid side reactions with the hydride terminated silicon surface. Monolayer formation was carried out using solutions of the alkene in the high-boiling-point solvent 1,3,5-triethylbenzene. The protecting group was removed under very mild acidic conditions to yield a free hydroxyl functionality, a convenient surface moiety for coupling of biological entities via carbamate bond formation. The chemical composition and structure of the monolayers before and after deprotection were characterized by X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry. To demonstrate the utility of this surface for covalent modification, two reagents were compared and contrasted for their ability to activate the surface hydroxyl groups for coupling of free amines, carbonyl diimidazole (CDI), and disuccinimidyl carbonate (DSC). Analysis of XP spectra before and after activation by CDI or DSC, and after subsequent reaction with glycine, provided quantitative information on the extent of activation and overall coupling efficiencies. CDI activated surfaces gave poor coupling yields under various conditions, whereas DSC mediated activation followed by aminolysis at neutral pH was found to be an efficient method for the immobilization of amines on tetra(ethylene oxide) modified surfaces.     

Dynamic imaging of single DNA-protein interactions using atomic force microscopy

Atomic force microscopy (AFM) imaging of static DNA-protein complexes, in air and in liquid, can be used to directly obtain quantitative and qualitative information on the structure of different complexes. For example, DNA length, the location of preferential binding sites for proteins and bending of DNA as a result of the complexation can all be measured. Recording consecutive AFM images of DNA and protein molecules under conditions that they are still able to move and interact, or dynamic AFM imaging, however, can reveal information on the dynamic aspects of the interactions between these molecules. Here, an overview is given of the technical challenges that need to be considered for successful dynamic AFM imaging studies of individual DNA-protein interactions. Necessary technical improvements to the AFM set-up and the development of new sample preparation methods are described in this paper.     

Study on the electroreduction of In(III) ions at gold from acidic bromide solutions by the rotating ring-disc electrode technique

The mechanism of the indium electrodeposition on gold from acidic KBr solutions has been investigated by means of the rotating ring-disc electrode technique. The measurements showed that the overall electrode reaction In(III) + 3 e In consists of two successive charge transfer steps, i.e. In(III) + 2 e In(I) and In(I) + e In, with soluble monovalent indium as an intermediate. The current efficiency for In(I) generation under steady-state conditions is 100% in the case of low disc current densities. The disproportionation of In(I) in the bulk of solution occurs in slightly acidified solutions,pH=2, in addition to the In(I) electrochemical reduction. Based on the ring current transients, it was established that the two-electron transfer step is preceded by the formation of a thin passive film of indium metal.

---

Untersuchung der elektrochemischen Reduktion von In(III)-Ionen an Gold in sauren Bromidlösungen mit der rotierenden Ring-Scheiben-Elektrode

Zusammenfassung Mit Hilfe der rotierenden Ring-Scheiben-Elektrode wurde der Mechanismus der kathodischen Abscheidung von Indium auf Gold in sauren KBr-Lösungen untersucht. Aus den Messungen folgt, daß die Bruttoreaktion In(III) + 3e In über zwei aufeinanderfolgende Durchtrittsreaktionen, In(III) + 2 e In(I) und In(I) + e In, mit löslichem einwertigem Indium als Zwischenprodukt abläuft. Bei kleinen Stromdichten werden die In(I)-Ionen mit 100%iger Stromausbeute erzeugt. In schwächer sauren Lösungen (pH=2) konnte außer der elektrochemischen Reduktion von In(I) zusätzlich dessen Disproportionierung innerhalb der Lösung ermittelt werden. Auf Grund der Ringstrom-Zeit-Kurven wurde auch festgestellt, daß die Bildung von einer dünnen In-Metallschicht, die ein passives Verhalten aufweist, dem Zweielektronenübergang vorangegangen ist.

     

Møller was right

Direct calculation proves that the total energy-momentum vector derived from the Møller energy-momentum complex from 1958 does not transform like a free 4-vector with respect to the Lorentz transformation. This conforms with the conclusion formulated by Møller himself, but it contradicts the result of the critical analysis of Kovacs. Defects in Kovacs argumentation are found.