Distribution of mercury in soil organic matter fractions obtained by dissolution/precipitation method

Sequential multistep procedure, usually used for the fractionation and characterization of soil organic matter was tested for Hg content in the individual steps and fractions. Under general laboratory conditions serious problems have arosen during the attempt in the Hg mass balance calculation. Several sources of Hg contamination were recognized. The most serious was the background concentration of Hg even in research grade chemicals (what is in general not declared) and laboratory air. The work on operational Hg speciation as non-humic bound, humic acid, fulvic acid bound proceeds from the established status-quo on distribution of mercury of soil organic matter.     

Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

Characterization of anthocyanin extracts from maize kernels

The aim of the present work is to characterize the pigments present in the kernel of four native maize varieties related to the races Arrocillo, Cónico, Peruano, and Purepecha to determine their possible use as natural dyes. Total anthocyanin content is determined by a conventional spectrophotometric method, and anthocyanin analysis is done by high-performance liquid chromatography. The stability of the pigment at pH is also evaluated. The four maize samples contained anthocyanin in both the pericarp and aleurone layer. Total anthocyanin content among samples ranged from 54 mg/100 g of sample to 115 mg/100 g of sample. Anthocyanin profiles are almost the same among the four samples. Differences are observed only in the relative percentage of each anthocyanin. The anthocyanins identified are cyanidin-3-glucoside, pelargonidin- 3-glucoside, peonidin-3-glucoside, cyanidin-3-(6" malonylglucoside), and cyanidin-3-(3",6"-dimalonylglucoside). Anthocyanin extracts showed similar behavior in solutions with different pH. From pH 1-6 lambdamax values are maintained almost constant; however, above this pH value, a marked increase is observed in the bathochromic shifts, but the bluish color did not continue to change above pH 8.     

Regulation of the excitation energy utilization in the photosynthetic apparatus of chlorina f2 barley mutant grown under different irradiances

Acclimation of the photosynthetic apparatus of chlorophyll b-less barley mutant chlorina f2 to low light (100 micromolm(-2)s(-1); LL) and extremely high light level (1000 micromolm(-2)s(-1); HL) was examined using techniques of pigment analysis and chlorophyll a fluorescence measurements at room temperature and at 77 K. The absence of chlorophyll b in LL-grown chlorina f2 resulted in the reduction of functional antenna size of both photosystem II (by 67%) and photosystem I (by 21%). Chlorophyll fluorescence characteristics of the LL-grown mutant indicated no impairment of the utilization of absorbed light energy in photosystem II photochemistry. Thermal dissipation of excitation energy estimated as non-photochemical quenching of minimal fluorescence (SV(0)) was significantly higher as compared to the wild-type barley grown under LL. Despite impaired assembly of pigment-protein complexes, chlorina f2 was able to efficiently acclimate to HL. In comparison with chlorina f2 grown under LL, HL-grown chlorina f2 was characterized by unaffected maximal photochemical efficiency of photosystem II (F(V)/F(M), doubled content of both beta-carotene and the xanthophyll cycle pigments and considerably reduced efficiency of excitation energy transfer from carotenoids to chlorophyll a. The enormous xanthophyll cycle pool size was however associated with reduced SV(0) capacity. We suggest that the substantial part of the xanthophyll cycle pigments is not bound to the remaining pigment-protein complexes and acts as filter for excitation energy, thereby contributing to the efficient photoprotection of chlorina f2 grown under HL.     

Al2O3-coated 3-N-propylpyridinium chloride silsesquioxane polymer film: preparation and electrochemical property study of adsorbed cobalt tetrasulfophthalocyanine

Porous Al2O3 presenting a specific surface area of SBET = 105 m2 g(-1) was coated with 3-N-propylpyridinium chloride silsesquioxane polymer. The ion exchange capacity of this polymer grafted onto an Al2O3 surface, resulting in a material designated as AlSiPy(+)Cl-, was 1.09 mmol g(-1). Furthermore, a cobalt(II) tetrasulfophthalocyanine anionic complex was immobilized on the chemically modified surface by an ion exchange reaction with a yield of 40 micromol g(-1) (the surface density of the electroactive species is 3.80 x 10(-11) mol cm(-2)). The electrochemical properties of the material obtained, AlSiPy/CoTsPc, were tested for the catalytic oxidation of oxalic acid at 0.77 V vs SCE in 1.0 mol l(-1) KCl solution. Furthermore, a chronoamperometric technique was used with the electrode to test its potential use as a sensor for oxalic acid. The electrode response to oxalic acid concentrations between 1.0 and 3.5 mmol l(-1) was linear with an estimated detection limit of 0.5 mmol l(-1). The charge transfer resistance of the material, measured using the electrochemical impedance spectroscopy technique, was 43 Omega cm2.     

Cerium hybrid silica coatings on stainless steel AISI 304 substrate

AISI 304 Stainless Steel is widely used in different industrial fields because of its mechanical and corrosion properties. However, its tendency to corrosion in presence of halide ions limits the applications. One strategy to improve the corrosion resistance is the use of coatings barriers containing corrosion inhibitors in their formulation. The lanthanides present attractive green and corrosion properties for the substitution of chromates, which are the most common substances used as corrosion protection. However, these compounds are highly toxic, and an intense effort is being undertaken to replace them. Cerium is a good alternative because of its relatively low cost and abundance. It fulfils the basics requirements for being considered an alternative inhibitor: the ions form insoluble hydroxides and they present low toxicity. Inorganic and hybrid sol-gel coatings have been developed to increase the corrosion resistance of metals and they provide an excellent vehicle for the incorporation of secondary phases including particles and metal ions as cerium ions. The aim of this work was to study the influence of the incorporation of cerium ions in hybrid silica sol-gel coatings deposited on AISI 304 stainless steel as substrate as a potential replacement of chromate treatments. This system should combine the barrier protection effect of silica coating with the corrosion inhibitor effect of the cerium ions inside the coatings. After 7 days of immersion in NaCl, coated substrates showed lower current densities than the bare steel, although the coatings produced from Ce (III) salts experience a slight weakening in time and those obtained from Ce (IV) chemicals evidence an enhance in the coating performance, probably due to the plugging of corrosion products in the defective areas of the film.     

Heterogeneous reactions of solid nickel(II) complexes,V

The kinetics of the thermal decomposition of solid complexes of the type Ni(NCS)₂L₂ (L=pyridine,β-picoline and quinoline), of pseudooctahedral configuration, were studied by using isothermal methods, on the basis of losses of weight, in the temperature range 90–191?. The most suitable reaction order for all the complexes under investigation was found to ben=2/3, i.e. the total decomposition rate is determined by the chemical process proper. The calculated values ofE _a(in kcal · mole^?1) decrease in the following order: Ni(NCS)₂py₂ (29.4)>Ni(NCS)₂(β-pic)₂ (27.6)>Ni(NCS)₂Q₂ (24.3). With increasing volume of the ligand L the reaction rate also increases, and this suggests that the reaction proceeds by dissociative activation. For all the investigated complexes it was found that δH>E _A; this may be explained by a several-step mechanism and the complex Ni(NCS)₂L is then considered an intermediate.     

Low-dimensional Compounds Containing Cyano Groups. XIII. Structural–spectral Correlation of Copper Dicyanoargentates

The new mixed-valence mixed-metal complex Cu(py)₆Cu₂Ag₂(CN)₆ (py = pyridine) possesses a three dimensional polymeric crystal structure. The Cu(I) atom is tetrahedrally coordinated by two nitrogen atoms of pyridine molecules, by one nitrogen atom of the dicyanoargentate anion and by one carbon atom of the cyano group. Both the dicyanoargentate anion and the cyano group bridge the Cu(I) atom with neighboring Cu(II) atoms. These are hexacoordinated in the form of an elongated tetragonal bipyramid. The equatorial plane is formed by two nitrogen atoms from two pyridine molecules and two nitrogen atoms from bridging cyano groups. Axial positions are occupied by nitrogen atoms of the bridging [Ag(CN₂]⁻ anions. Correlation between structures of the title compound and seven other dicyanoargentates with their i.r. spectra has been studied. The coordination mode of [Ag(CN₂]⁻ anions in compounds Cu_8-xAg_x(tn)₃(CN)₁₀ x = 0.25, Cu(3-Mepy)₂Ag₂(CN)₄, Cu(py)₂Ag₂(CN)₄ and Cu(py)₄Ag₂(CN)₄ (tn is 1,3-diaminopropane, 3-Mepy is 3-methylpyridine) is predicted based on this correlation.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.