Development of a capillary electrophoretic method for the separation of diastereoisomers of a new human immunodeficiency virus protease inhibitor

A capillary electrophoretic (CE) method was developed for the separation of diastereoisomers of a new human immunodeficiency virus (HIV) protease inhibitor TMC114. In total 16 isomers of this drug have been synthesized (eight pairs of enantiomers). We succeeded in the separation of the eight diastereoisomers, but no enantiomers could be separated. Because of the high similarity and water-insolubility of these isomers, the separation is a real challenge. Different CE modes were tried out: capillary zone electrophoresis (CZE), nonaqueous capillary electrophoresis (NACE), micellar electrokinetic capillary chromatography (MEKC), and microemulsion electrokinetic capillary chromatography (MEEKC). Only MEEKC offered resolution of these compounds.     

Aggregation behavior of p-n-alkylbenzamidinium chloride surfactants

The aggregation behavior of a novel class of surfactants, p-n-alkylbenzamidinium chlorides, has been investigated. The thermodynamics of aggregation of p-n-decylbenzamidinium chloride mixed with cationic and anionic cosurfactants has been studied using isothermal titration calorimetry. For mixtures of p-n-decylbenzamidinium chloride with n-alkyltrimethylammonium chlorides, the aggregation process is enthalpically more favorable than for the pure n-alkyltrimethylammonium chlorides, probably caused by diminished headgroup repulsion due to charge delocalization in the amidinium headgroup. A critical aggregation concentration between 3 and 4 mM has been extrapolated for p-n-decylbenzamidinium chloride at 40 degrees C, around two times lower than that of similar surfactants without charge delocalization in the headgroup and well comparable to that of similar surfactants with charge delocalization in the headgroup. In mixtures of p-n-decylbenzamidinium chloride with either sodium n-alkylsulfates or sodium dodecylbenzenesulfonate, evidence is found for the formation of bilayer aggregates by the pseudo-double-tailed catanionic surfactants composed of p-n-decylbenzamidinium and the anionic surfactant. These aggregates are solubilized to mixed micelles by excess free anionic surfactant at the measured critical aggregation concentration.     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

4,5‐Di­hydro‐3‐methyl‐5‐(4‐methyl­phenyl)‐1H‐pyrazole‐1‐carboxamidinium acetate acetone hemisolvate

The X‐ray structure analysis of the unexpected product of the reaction between 4‐(4‐methyl­phenyl)­but‐3‐en‐2‐one and amino­guanidine revealed the title compound, C₁₂H₁₇N₄⁺·C₂H₃O₂^?·0.5C₃H₆O, consisting of a protonated amidine moiety joined to a substituted pyrazoline ring at the N1 atom. The amidine group is protonated and the positive charge is delocalized over the three C—N bonds in a similar manner to that found in guanidinium salts. The amidinium moiety of the cation is linked to the acetate anions through four N—H?O hydrogen bonds, with N?O distances of 2.749 (4), 2.848 (4), 2.904 (4) and 2.911 (4) Å. The pyrazoline ring adopts a flattened envelope conformation and the substituted phenyl ring is oriented perpendicular to the attached heterocycle. The acetone solvate molecule lies across a twofold rotation axis.     

REDUCED PHOTOINACTIVATION OF 10-DODECYL ACRIDINE ORANGE-SENSITIZED YEAST CELLS AT HIGH FLUENCE RATES MEASUREMENTS AND COMPUTER SIMULATIONS

Abstract-During the development of a photodamage cell sorter several photosensitizers were tested for their ability to photoinactivate more than 90% of the sensitized cells after a brief irradiation with a fluence of 10 kJ/m². In pilot experiments, yeast cells sensitized with 10-dodecyl acridine orange (DAO) were effectively photoinactivated after receiving a fluence of 10 kJ/m² delivered in 8 s. However, when the same fluence was delivered in 3 μ s during passage through a focused laser beam in the cell sorter, all cells survived.
Computer simulations of the relevant photophysical and chemical reactions inside the irradiated cell were used to investigate the cause of this phenomenon. The results indicated that the absence of photoinactivation by DAO, after flash irradiations, was caused by the combined effects of (1) limited oxygen diffusion into the cell and (2) a reduced number of collisions between photosensitizer triplet and oxygen molecules during the irradiation due to saturation of the intracellular photosensitizer triplet concentration. The contributions of triplet-triplet annihilation and triplet quenching by ground state photosensitizer molecules were found to be minimal and not significant. These findings indicate that Type II photosensitizers are incapable of rapid selective photoinactivation in cell sorters.     

Dendrimeric Gd(III) complex of a monophosphinated DOTA analogue: optimizing relaxivity by reducing internal motion

A marked increase of relaxivity has been observed upon rigidifying the internal frame of Gd-containing PAMAM dendrimers: the effect has been attained by either protonation of the dendrimer or by forming supramolecular adducts with cationic polyaminoacids.     

Crosslinked polystyrene with improved mechanical properties

The synthesis of some divinyl monomers—bis(vinylphenyl)ethane ( 2 ), bis(vinylbenzyloxy)hexane ( 3a ), and bis(vinylbenzyloxy)dodecane ( 3b ) is reported. Copolymers of the new monomers and styrene were evaluated as an alternative to divinylbenzene-crosslinked polymers for use as matrices and absorbents. The mechanical properties and the amount of residual double bonds in the copolymers were compared. It was found that the new copolymers, unlike the divinylbenzene-crosslinked polymers, retained their mechanical strength even at high crosslinking degrees. Stress at break values of 79, 68, and 18 N/mm² were found for the polymers crosslinked with 20 mol % of 3a, 2 , and divinylbenzene; 5, 25 and 45% of the divinyl units in these polymers were left as pendant double bonds. Porous styrene– 2 copolymers were synthesized and shown to have lower surface areas than the corresponding divinylbenzene-crosslinked polymers. The pore size distribution showed that this was due to the absence of the smallest pores which are found in the divinylbenzene-crosslinked polymers in between heavily crosslinked nodules. © 1993 John Wiley & Sons, Inc.     

Synthesis and derivatization of daptomycin: a chemoenzymatic route to acidic lipopeptide antibiotics

Daptomycin is a branched cyclic nonribosomally assembled acidic lipopeptide, which is the first clinically approved antibiotic of this class. Here we show that the recombinant cyclization domain of the Streptomyces coelicolor calcium-dependent antibiotic (CDA) nonribosomal peptide synthetase (NRPS) is a versatile tool for the chemoenzymatic generation of daptomycin derivatives. Linear CDA undecapeptide thioesters with single exchanges at six daptomycin-specific residues were successfully cyclized by CDA cyclase. Simultaneous incorporation of all six of these residues into the peptide backbone and elongation of the N-terminus of CDA by two residues yielded a daptomycin derivative that lacked only the beta-methyl group of l-3-methylglutamate. Bioactivity studies with several substrate analogues revealed a significant role of nonproteinogenic constituents for antibacterial potency. In accordance with acidic lipopeptides, the bioactivity of the chemoenzymatic assembled daptomycin analogue is dependent on the concentration of calcium ions. Single deletions of the four acidic residues in the peptide backbone suggest that only two aspartic acid residues are essential for antimicrobial potency. These two residues are strictly conserved among other nonribosomal acidic lipopeptides and the EF-motif of ribosomally assembled calmodulin. Based on these findings CDA cyclase is a versatile catalyst that can be used to generate novel daptomycin derivatives that are otherwise difficult to obtain by chemical modification of the parental tridecapeptide to improve further its therapeutic activity.