Supramolecular dimer formation through hydrogen bond extensions of carboxylate ligands – Path for magnetic exchange

A new complex of unusual composition [Cu(3-O₂Nbz)₂(nia)(H₂O)₂] (1) (nia = nicotinamide, 3-O₂Nbz = 3-nitrobenzoate) has been prepared and studied together with two other complexes of composition [Cu(4-O₂Nbz)₂(nia)₂(H₂O)₂] (2) and [Cu(4-O₂Nbz)₂(nia)₂]?(4-O₂NbzH)₂ (3) (4-O₂Nbz = 4-nitrobenzoate). The composition of all complexes has been determined by elemental analysis, the complexes have been studied by electronic, infrared and EPR spectroscopy, as well as by magnetization measurements over the temperature range 1.8–300 K, and their structures have been solved. The structure of complex (1) consists of molecules, where Cu(II) atom is monodentately coordinated by the pair of 3-nitrobenzoato anions in trans  -positions together with water and nicotinamide molecules, forming nearly tetragonal basal plane, and by another water molecule in axial position of tetragonal-pyramidal coordination polyhedron. The neighboring molecule coordination polyhedron basal planes are coplanar and allow formation of supramolecular dimers with strong H-bonds between hydrogen atoms from equatorially coordinated water molecules and uncoordinated carboxylate oxygen atoms thus giving the nearest Cu?$?$Cu distance of 4.886(2) Å. Magnetization measurements showed that complex (1) exhibits maximum of magnetic susceptibility at 6.5 K and a fit to Bleaney-Bowers equation gave singlet–triplet energy gap 2J = −6.25 cm⁻¹, and zJ′ = −0.03 cm⁻¹. This might be an experimental proof that the carboxylate bridges extended with hydrogen bonds are the pathway of the spin–spin interactions. The temperature dependence of changes in EPR spectra of (1) and the spectrum at 4.2 K have confirmed its hydrogen bonded dimeric structure. The calculated Cu?$?$Cu distance 4.8 Å is in very good agreement with the value obtained from crystal structure. The complexes (2) and (3) at 300 K exhibit magnetic moment μ_eff = 1.98 B.M. and μ_eff = 1.84 B.M., respectively. These values practically do not change with lowering the temperature up to 5 K and only small drops to μ_eff = 1.87 B.M. (for (2)) and μ_eff = 1.79 B.M. (for (3)) at 1.8 K have been observed. The EPR spectra of complex (2) at room temperature as well as at 77 K are of axial type with g_⊥ = 2.062 and g_|| = 2.285 and exhibit resolved parallel hyperfine splitting with A_|| = 160 Gauss. The EPR spectra of complex (3) at room temperature as well as at 77 K are of axial type with g_⊥ = 2.065 and g_|| = 2.235 and exhibit unresolved parallel hyperfine splitting. EPR spectra of (2) and (3) are consistent with the X-ray structure.     

Meta nitration of thiacalixarenes

Nitration of thiacalix[4]arene, immobilized in the 1,3-alternate conformation, leads regioselectively to meta-substituted products. Depending on the reaction conditions, mono- and dinitro-derivatives can be isolated in acceptable yields. This unique substitution pattern is inaccessible in classical calixarene chemistry, and yields inherently chiral compounds, which makes thiacalixarenes very attractive as building blocks or molecular scaffolds.     

Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM

The dispersion of Nafion ionomer particles and Pt/C catalyst aggregates in liquid media was studied using both ultra-small-angle X-ray scattering (USAXS) and cryogenic TEM. A systematic approach was taken to study first the dispersion of each component (i.e., ionomer particles and Pt/C aggregates), then the combination of the components, and last the catalyst ink. Multiple-level curve fitting was used to extract the particle size, size distribution, and geometry of the Pt/C aggregates and the Nafion particles in liquid media from the scattering data. The results suggest that the particle size, size distribution, and geometry are not uniform throughout the systems but rather vary significantly. It was found that the interaction of each component (i.e., the Nafion ionomer particles and the Pt/C aggregates) occurs in the dispersion. Cryogenic TEM was used to observe the size and geometry of the particles in liquid directly and to validate the scattering results. The TEM results showed excellent agreement.     

Synthesis of 6-amino-5-cyano-1,4-disubstituted-2(1H)-pyrimidinones via copper-(I)-catalyzed alkyne-azide 'click chemistry' and their reactivity

In this paper we present the room temperature synthesis of a novel serie of 1,4-disubstituted-1,2,3-triazoles 4a-l by employing the (3+2) cycloaddition reaction of pyrimidinones containing alkyne functions with different model azides in the presence of copper sulphate and sodium ascorbate. To obtain the final triazoles, we also synthesized the major precursors 6-amino-5-cyano-1,4-disubstituted-2(1H)-pyrimidinones 3a-r from ethyl 2,2-dicyanovinylcarbamate derivatives 2a-c and various primary aromatic amines containing an alkyne group. The triazoles were prepared in good to very good yields.     

Chiral discrimination of β‐3‐homo‐amino acids using the kinetic method

Chiral discrimination of seven enantiomeric pairs of β‐3‐homo‐amino acids was studied by using the kinetic method and trimeric metal‐bound complexes, with natural and unnatural α‐amino acids as chiral reference compounds and divalent metal ions (Cu²⁺ and Ni²⁺) as the center ions. The β‐3‐homo‐amino acids were selected for this study because, first of all, chiral discrimination of β‐amino acids has not been extensively studied by mass spectrometry. Moreover, these β‐3‐homo‐amino acids studied have different aromatic side chains. Thus, the emphasis was to study the effect of the side chain (electron density of the phenyl ring, as well as the difference between phenyl and benzyl side chains) for the chiral discrimination. The results showed that by the proper choice of a metal ion and a chiral reference compound, all seven enantiomeric pairs of β‐3‐homo‐amino acids could be differentiated. Moreover, it was noted that the β‐3‐homo‐amino acids with benzyl side chains provided higher enantioselectivity than the corresponding phenyl ones. However, increasing or decreasing the electron density of the aromatic ring by different substituents in both the phenyl and benzyl side chains had practically no role for chiral discrimination of β‐3‐homo‐amino acids studied. When copper was used as the central metal, the phenyl side chain containing reference molecules (S)‐2‐amino‐2‐phenylacetic acid (L ‐Phg) and (S)‐2‐amino‐2‐(4‐hydroxyphenyl)‐acetic acid (L ‐4′‐OHPhg) gave rise to an additional copper‐reduced dimeric fragment ion, [Cu^I(ref)(A)]⁺. The inclusion of this ion improved noticeably the enantioselectivity values obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

SQSQh: 1H‐detected SQ–SQ experiment for determination of signed silicon–carbon coupling constants

A new variant of SQ–SQ pulse sequence (SQSQh) for relative sign determination and detection of small silicon–carbon couplings over more than one bond is presented. In the SQSQh sequence, proton detection replaces carbon detection used in the original SQ–SQ pulse sequence (SQSQc). The theoretical gain in sensitivity was experimentally tested on two samples (trimethylsiloxyethane, 1, and 1,2,4‐tris(trimethylsiloxy)benzene, 2), the experimentally found gain provided by the SQSQh over the SQSQc method varied between 6 and 8. The method can be applied to linear spin systems, i.e. to systems where the silicon is coupled to the carbon in question and to any hydrogen not necessarily bonded to the carbon. Copyright © 2010 John Wiley & Sons, Ltd.     

Separation,Identification, and Quantitative Analysis of the Epimers of Cefaclor by TLC-Densitometry

JPC – Journal of Planar Chromatography – Modern TLC - The epimers of cefaclor have been separated, identified, and analyzed quantitatively by TLC. The stationary phase was silica gel 60...     

7‐Methoxy‐2,3‐dioxo‐1,4‐dihydroquinoxalin‐6‐aminium chloride monohydrate

Single crystals of the title compound, C₉H₁₀N₃O₃⁺·Cl⁻·H₂O, were obtained by recrystallization from hydrochloric acid. The cations stack along the crystallographic a direction. The 2,3‐dioxo‐1,4‐dihydroquinoxaline group shows a significant deviation from planarity [r.m.s. deviation from the best plane = 0.063 (2) Å]. Hydrogen bonding links the cations, chloride anions and water molecules to form an extended three‐dimensional architecture.     

(S,S)‐Lactoyllactic acid and (S,S,S)‐lactoyllactoyllactic acid

The dimeric condensation product of lactic acid, namely (S,S)‐2‐[(2‐hydroxypropanoyl)oxy]propanoic acid, C₆H₁₀O₅, (I), crystallizes with two independent molecules in the asymmetric unit, which both have an essentially planar backbone. The trimeric condensation product, namely (S,S,S)‐3‐hydroxybut‐3‐en‐2‐yl 2‐[(2‐hydroxypropanoyl)oxy]propanoate, C₉H₁₄O₇, (II), has one molecule in the asymmetric unit and consists of two essentially planar parts, with the central C—O bond in a gauche conformation. Both molecules of the dimer are involved in intermolecular hydrogen bonds, forming chains with a C(8) graph set. These chains are connected by D(2) hydrogen bonds to form a two‐dimensional layer. The trimer forms hydrogen‐bonded C(10) and C₂²(6) chains, which together result in a two‐dimensional motif. The Hooft method [Hooft, Straver & Spek (2008). J. Appl. Cryst. 41 , 96–103] was successfully applied to the determination of the absolute structure of (I).