Determination of 13C/12C-ratios of anthropogenic organic contaminants in river water samples by GC-irmMS

This study describes the application of a common analytical procedure adapted for compound-specific stable carbon isotope analyses of riverine contaminants. To evaluate the sensitivity of the analytical method and the precision of the isotopic data obtained, a set of numerous substances at different concentration levels were measured. For most of the anthropogenic contaminants investigated (including chlorinated aliphatics and aromatics, musk fragrances, phthalate-based plasticizers and tetrabutyl tin) acceptable carbon isotope analyses could be obtained down to amounts of approximately 5?ng absolutely applied to the gas chromatograph. These amounts correspond to concentrations in water samples at a natural abundance level of approximately 50–200?ng?L^?1 (low to medium contaminated river systems). However, it has to be considered that the precision and the sensitivity of the analytical method depend partially on the chemical properties of the substances measured. Five recovery experiments were conducted to assess changes in carbon isotope ratios during sample preparation and measurement. The compounds selected for these experiments are known riverine contaminants. Isotopic shifts or higher variations of the isotope ratios as a result of the analytical procedures applied were observed only for a couple of contaminants. Furthermore, compound-specific carbon isotope analyses were performed on eight water extracts of the Rhine river. By comparing the variation of the data of several individual compounds with the deviations obtained from the recovery experiments, it was possible to differentiate contaminants with unaffected isotope ratios and substances with significant alterations of the δ¹³C-values.     

A Multicolumn Ion Chromatographic Determination of Nitrate and Sulfate in Waters Containing Humic Substances

Abstract

A three-column ion chromatographic system for the removal of humic substances from natural waters, and subsequent on-line concentration and determination of nitrate and sulfate using non-suppressed ion chromatography is presented. Humic substances are removed using disposable adsorption columns packed with chemically bonded amine silica material. The sample is directly transfered to an ion exchange column where the anions are concentrated ca 10 times. After reversing the flow, the ions are transferred to a third column where they are separated and quantified. The detection limit is less than 1 mg L^?1 of nitrate or sulfate in water containing 45mgL^?1 of humic acid.     

How does a reversible electrode respond in a.c. voltammetry? Part 2: solutions for the periodic current amplitudes

Journal of Solid State Electrochemistry - In a.c. voltammetry, a programmed electrical potential—a linear ramp modulated by a sine wave of frequency ω and modest amplitude—is...     

Glycan-modified interfaces in biosensing: an electrochemical approach

Glycans (complex carbohydrates) attached to various interfacial layers represent a simple but functional model of a cellular surface, which is covered densely by glycans. In this review, we discuss interactions of surface-confined glycans with various glycan-binding proteins, viruses, or pathogenic bacteria. Such glycan receptive interfaces can be applied for biosensing of these analytes. In this review, we focus on the application of glycan interfaces for label-free electrochemical biosensing.     

Thiadiazolo-Azaacenes

This work reports the synthesis and characterization of bis- and tetrakis(thiadiazolo)-appended di- and tetraazaacenes, displaying up to seven catenated benzene/pyrazine rings. The targets are obtained by condensation of benzo-bis(thiadiazole)-4,5-dione with aromatic di- and tetraamines. The condensation products—up to a heptacene-like species—are stable but can be insoluble. Soluble derivatives are readily processible, but do not show enhanced electron affinities, as the two or four attached benzothiadiazole units are effectively resonance-separated from the acene body, maximizing the number of Clar-sextets.     

Covalent Attachment of Fibronectin onto Emulsion‐Templated Porous Polymer Scaffolds Enhances Human Endometrial Stromal Cell Adhesion,Infiltration, and Function

A novel strategy for the surface functionalization of emulsion‐templated highly porous (polyHIPE) materials as well as its application to in vitro 3D cell culture is presented. A heterobifunctional linker that consists of an amine‐reactive N‐hydroxysuccinimide ester and a photoactivatable nitrophenyl azide, N‐sulfosuccinimidyl‐6‐(4′‐azido‐2′‐nitrophenylamino)hexanoate (sulfo‐SANPAH), is utilized to functionalize polyHIPE surfaces. The ability to conjugate a range of compounds (6‐aminofluorescein, heptafluorobutylamine, poly(ethylene glycol) bis‐amine, and fibronectin) to the polyHIPE surface is demonstrated using fluorescence imaging, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. Compared to other existing surface functionalization methods for polyHIPE materials, this approach is facile, efficient, versatile, and benign. It can also be used to attach biomolecules to polyHIPE surfaces including cell adhesion‐promoting extracellular matrix proteins. Cell culture experiments demonstrated that the fibronectin‐conjugated polyHIPE scaffolds improve the adhesion and function of primary human endometrial stromal cells. It is believed that this approach can be employed to produce the next generation of polyHIPE scaffolds with tailored surface functionality, enhancing their application in 3D cell culture and tissue engineering whilst broadening the scope of applications to a wider range of cell types.     

Nucleation,morphology, and structure of sub-nm thin ceria islands on Rh(111)

The early stages of ceria growth on Rh(111) at high temperature have been investigated by low-energy electron microscopy and photoemission electron microscopy. Ceria was deposited by reactive Ce deposition at substrate temperatures between 700°C and 900°C in an oxygen ambient of 5 × 10⁻⁷ Torr. At 700°C, we observe a high nucleation density of 100-nm-sized islands. With elevated temperature, the average island size increases, and the nucleation density decreases. Triangularly shaped islands nucleate preferentially at step edges, with seemingly abrupt interfaces between Ce and Rh. At 900°C, the island edges are still straight, but during growth the islands lose their triangular form. Instead, growth along the substrate step edges becomes favorable, leading to a maze-like morphology. Atomic force microscopy reveals islands of 0.3 to 0.6-nm height, consistent with ceria islands formed by one or two trilayers (O―Ce―O) of ceria. Moreover, the second layer of the islands is also triangularly shaped, with lateral dimensions of 50 nm and similar step heights. IV-LEEM analysis leads to the conclusion that the rhodium surface is covered by a layer of reduced cerium oxide, which is partially overgrown by smaller islands of CeO₂.     

Polymers with Upper Critical Solution Temperature in Aqueous Solution

This review focuses on polymers with upper critical solution temperature (UCST) in water or electrolyte solution and provides a detailed survey of the yet few existing examples. A guide for synthetic chemists for the design of novel UCST polymers is presented and possible handles to tune the phase transition temperature, sharpness of transition, hysteresis, and effectiveness of phase separation are discussed. This review tries to answer the question why polymers with UCST remained largely underrepresented in academic as well as applied research and what requirements have to be fulfilled to make these polymers suitable for the development of smart materials with a positive thermoresponse.