The Fundamental Basis for Cyclopolymerization. VII. A Cyclopolymerization Study of Certain Allylcycloalkenes

The cyclopolymerization characteristics of 3-allylcyclopentene, 3 allylcyclopentene, 3-allylcyclohexene, and 4-allylohexene were studied and the extent of their cyclopolymerization by cationic initiation were compared with previously reported solvolysis results involving the same intermediate carbonium ion. The results of this study were also compared with previously reported results on 4-vinylcyclohexene and 1, 4-dimethylenecyclohexane. The allylcycloalkenes were also polymerized by metal alkyl coordination catalysts and the extent of cyclization in each case was determined. The polymers derived from these monomers invariably contained polymeric fractions (27 to 99%) which were soluble in non-polar organic solvents. Calculations based on NMR spectral data indicated the cationic polymers were 68 to 95% cyclized. The extent of cyclization was found to parallel the interolefinic separation in the monomer. Coordination polymerization yielded somewhat lower ratios of cyclizations (54 to 80%) in all cases except for 4-allylcyclohexene. 4-Allylcyclohexene gave only 5 to 54% cyclization, 4-Vinylcyclohexene, 3-allylcyclopentene, and 3-allylcyclohexene produced soluble copolymers with maleic anhydride. Elemental analysis indicated the composition of these copolymers to be 2:1 molar in maleic anhydride and diene units. A cyclic copolymerization mechanism suggested the formation of a multicyclic repeating unit. The other monomers gave crosslinked polymers since maleic anhydride could not be incorporated into a six-membered ring.     

The effect of carbon nanotubes on epoxy matrix nanocomposites

The paper concerns thermal properties of epoxy/nanotubes composites for aircraft application. In this work, influence of carbon nanotubes on thermal stability, thermal conductivity, and crosslinking density of epoxy matrix was determined. Three kinds of nanotubes were used: non-modified with 1- and 1.5-μm length, and 1-μm length modified with amino groups. Scanning electron microscopy observations were done for examining dispersion of nanotubes in the epoxy matrix. Glass transition temperature (T _g) was readout from differential scanning calorimetry. From dynamic mechanical analysis, crosslinking density was calculated for epoxy and its composites. Also, thermogravimetric analysis was done to determine influence of nanotubes addition on thermal stability and decomposition process of composites. Activation energy was calculated from TGA curves by Flynn–Wall–Ozawa method. Thermal diffusivity was also measured. SEM images proved the uniform dispersion of carbon nanotubes without any agglomerates. It was found that nanotubes modified with amino groups lead to the increase of epoxy matrix crosslinking density. The significant increase in T _g was also observed. On the other hand, addition of carbon nanotubes leads to the decrease of thermal stability of polymer due to the increase of thermal diffusivity.     

A Modified Synthesis of 9-(1,2-Dichlorovinyl)carbazole by Using Crown Ethers and Cryptands in a Non-aqueous System

The 9-[(E)-1,2-dichloroviny1]carbazole is a starting material for synthesis of 9-ethynyl-carbazole [1], which in term is monomer for preparation of photoconductive polymers [2]. Dichlorovinylation of carbazole in a solid-liquid two phase system in the presence of crown and cryptand catalysts has been studied. Application of the Phase Transfer Catalysis in the nonaqueous system increases yield of 9-[(E)-1,2-dichloroviny1]carbazole in comparison to the methods based on liquid-liquid system with benzyltriethylammonium chloride (TEBA) or dimethylsulfoxide (DMSO) as catalysts.     

Regiospecific Synthesis of α-Alkylated Ketones

Several solutions have been developed to avoid the troublesome di- and polyalkylation encountered in ketone enolate alkylations¹, including use of the covalent Li enolate, or “additives” to tighten the metal-oxygen bond (M = Si^2,3,4, Sn^5,6, Al⁶, B^7,8,9).     

Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Determination of antioxidant activity using oxidative damage to plasmid DNA — pursuit of solvent optimization

Oxidative stress plays a key role in the pathophysiology of many diseases. Hydroxyl radical is the oxidative species most commonly causing damage to cells. The aim of this work was to optimize the method for antioxidant activity determination on a model lipophilic geranylated flavanone, diplacone. This method uses protection of plasmid DNA from oxidation by a hydroxyl radical generated by the Fenton reaction involving oxidation of metal ions using H₂O₂ and ascorbate. The method was optimized for lipophilic compounds using several solvents and co-solvents. It was found that (2-hydroxypropyl)-β-cyclodextrin (0.1 mass % aq. sol.) is the best co-solvent for our model lipophilic compound to measure the antioxidant activity by the method presented. Other solvents, namely dimethyl sulfoxide, Cremophor EL® (0.1 mass % aq. sol.), ethanol, and methanol, were not suitable for the determination of the antioxidant activity by the method described. Tween 80 (0.1 mass % aq. sol.) and a mixture of 10 vol. % ethanol and 9 mass % bovine serum albumin (aq. sol.) significantly decreased the antioxidant activity of the model lipophilic compound and thus were not suitable for this method.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

Combining ferrocene,thiophene and a boronic acid: a hybrid ligand for reagentless electrochemical sensing of cis-diols

A redox-active affinity ligand suitable for reagentless sensing of cis-diols was synthesised and characterised. 4-[(Ferrocenylamino)methyl]thiophene-3-boronic acid (FcTBA) was allowed to interact with the model cis-diol, sorbitol. A discrete, cathodic shift of the redox potential was observed upon interaction of FcTBA with sorbitol thus providing simultaneous differentiation between the free and bound forms of this sensor molecule. Similar behaviour was observed also for FcTBA co-immobilised with thiophene in a mixed self-assembled monolayer on a gold electrode.