Synthesis,thermal stability and structural characterisation of iron(II) phthalocyanine complex with 4-cyanopyridine

A new complex of bis-axially coordinated iron(II) phthalocyanine by 4-cyanopyridine (4-CNpy) has been obtained in crystalline form as an adduct with two 4-CNpy molecules. The [FePc(4-CNpy)₂] · 2(4-CNpy) crystallises in the monoclinic system, space group P2₁/c with two molecules in the unit cell. The iron(II) coordinates four isoindole nitrogen atoms of the almost planar phthalocyaninato(2−) macroring and axially two nitrogen atoms of 4-CNpy molecules. The coordination polyhedron around the Fe(II) atom approximates to a tetragonal by-pyramid. Four equatorial Fe–N bonds are shorter (1.936(2) Å) than two axial Fe–N bonds (2.027(2) Å). The centrosymmetric FePc(4-CNpy)₂ molecules form alternating sheets parallel to the bc crystallographic plane and solvated 4-CNpy molecules that are anti-parallel oriented by their polar cyano groups are located between the sheets of FePc(4-CNpy)₂ molecules. Ligation of the intermediate-spin iron(II) phthalocyanine by 4-CNpy molecules leads to the low spin Fe(II) complex. The importance of the d(π) → π^∗(Pc) back donation is manifested in the difference between the values of C–N isoindole and C–N azamethine bond lengths of the Pc macrocycle. The thermal analysis of the crystals of [FePc(4-CN)₂] · 2(4-CNpy) shows two steps responsible for a loss of solvated (∼170 °C) and coordinated (∼235 °C) 4-CNpy molecules.     

One-pot synthesis of ortho-hydroxycinnamate esters

Phenols are converted to salicylaldehydes with paraformaldehyde, MgCl₂-Et₃N in THF, and subsequent treatment with methyl (triphenylphosphoranylidene)acetate gave the corresponding methyl ortho-hydroxycinnamate derivatives. The sequence is conveniently carried out as a one-pot procedure.     

Polyaniline-coated silica gel

Silica gel microspheres 7 and 15 μm in diameter were coated with an overlayer of polyaniline camphorsulfonate or hydrochloride during the oxidative polymerization of aniline. Coated silica gel and polyaniline precipitate were separated using a difference in sedimentation rate. In an alternative approach, the microspheres were modified with polyaniline in the presence of 35 nm colloidal silica. This technique prevented the macroscopic precipitation of polyaniline. Coatings of neat, 3-aminopropyl- and octadecyl-modified silica gel with polyaniline hydrochloride were compared. The surface composition of coated microspheres was characterized by X-ray photoelectron spectroscopy. Potential applications of particles in electrorheology, organic catalysis, and in modeling of conductivity behavior in composites are demonstrated.     

Strongly isolated ferromagnetic layers in poly-trans-mu-dichloro- and poly-trans-mu-dibromobis(1-(2-chloroethyl)-tetrazole-N4)copper(II) complexes

Two new isostructural compounds, dichlorobis(1-(2-chloroethyl)tetrazole)copper(II) (1) and dibromobis(1-(2-chloroethyl)tetrazole)copper(II) (2), have been prepared. The synthesis, characterization, and spectral and magnetic properties as well as the crystal and molecular structures of 1 and 2 have been studied. Both complexes form two-dimensional, distorted square grid planes of copper and halides, distinctly separated by layers of tetrazole ligands. The differential (ac) magnetic susceptibility, chi = (deltaM/deltaH)(T), and magnetization M(H) of both complexes have been studied as a function of temperature and field. The compounds possess a ferromagnetic interaction within the isolated copper-halide layers (J/k(B) = 8.0 K, J/k(B) = 10.2 K, respectively, for the chloride and the bromide, and T(c) = 4.75 K, T(c) = 8.01 K). The magnetic coupling J'/k(B) between the different layers is found to be very weak (|J'/J| 相似文献   

An empirical force field. II. Crystalline alkanes

The EFF'93 force field is used to study crystalline alkanes. In addition to detailed molecular geometries, the sublimation enthalpy, heat capacity, and lattice vibrations for a number of saturated hydrocarbons are reported and compared with experiment. © 1995 by John Wiley & Sons, Inc.     

Studies of the soluble part of oxidised coals

Soluble products obtained from the oxidation of four types of coal, each characterised by different degree of coalification and different degree of sulphur content, are studied. The coals are oxidised with peracetic acid (PAA) and nitric acid. Analyses are performed by Atmospheric Pressure-Temperature Programmed Reduction (AP-TPR) and Fourier Transform Infrared Spectroscopy (FTIR). The soluble products contain much more sulphur than the insoluble products of oxidation. The products obtained from the reaction with HNO₃ contain higher amounts of inorganic sulphur compounds, while those obtained from the reaction with PAA are characterised by an increased content of organic sulphur species.     

An experimental and theoretical study of the Cp2VO2CO: use of 13CO3(2-) for structure investigation of d1-metallocene complexes

EPR study has shown that the anticancer agent vanadocene dichloride (Cp2VCl2) interacts with carbonate contained in physiological solutions. Chelate complex Cp2VO2CO (|A(iso)(51V)| = 175.1 MHz, g(iso) = 1.9861) is the only paramagnetic species formed in the range about the physiological pH (5.5-11.0). The super-hyperfine coupling (|a(iso)(13C)| = 24.1 MHz) was evidenced at measurements using 13C labelled carbonate. The structure of carbonate complex was validated by comparison of observed and theoretical calculated HFC tensors (at the density functional level of theory).     

Temperature quenched DODAB dispersions: fluid and solid state coexistence and complex formation with oppositely charged surfactant

Dilute dispersions of the synthetic bilayer forming double-chained cationic lipid dioctadecyldimethylammonium bromide (DODAB) were investigated. In dispersions sonicated above the chain melting temperature Tm (approximately 45 degrees C) it was found by H NMR that about 50% of the surfactant chains remained fluid when the samples were cooled to room temperature, which is 20 degrees C below Tm. In contrast, there was no sign of a fluid fraction in unsonicated samples at room temperature. The addition of the anionic surfactant sodium dodecyl sulfate (SDS) to DODAB dispersions at room temperature resulted in the formation of an essentially stoichiometric DODA-DS complex with frozen chains, as seen by titration calorimetry and H NMR experiments. For sonicated samples, turbidity experiments demonstrated that, after a fast complexation reaction, the system remains colloidally stable unless the SDS-to-DODAB mixing ratio is too close to unity. H NMR experiments also showed that in the unreacted DODAB the fraction of fluid chains remained close to 50%, indicating either that SDS reacts equally fast with fluid and frozen DODAB or that there is a relaxation of the fluid fraction after the complexation. The melting enthalpy and the melting temperature of the alkyl chains rise gradually as the mixing ratio increases. We observed with cryo-TEM that the fraction of large unilamellar vesicles was significantly larger after addition of SDS. This indicates vesicle fusion. Based on both wide- and small-angle X-ray scattering patterns, the structure of the equimolar SDS-DODAB complex at 25 degress C was proposed to be lamellar.     

Determination of calcium in silicate rocks by potentiometric titration with ethyleneglycol-bis-(2-Aminoethylether)tetraacetic acid and a calcium-selective electrode

The method reported for the determination of calcium in silicate rocks involves titration with ethyleneglycol-bis(2-aminoethylether)tetraacetic acid (EGTA) to a potentiometric end-point. A Crytur calcium-selective electrode is used; the selectivity constants (K_ca,x) are less than 10^-3 for Mg, Ba, Sr, K and Na. The method can be used for calcium contents of 2% or higher (and exceptionally for lower contents), in the presence of up to 60% Mg, 33% AI, 17% Fe, 5% Ba, 5% Ti, and 2.5% Mn. Al, Fe and Ti are masked with sulphosalicylic acid, barium is precipitated as its sulphate, and manganese is bound as its cyanide complex. If the magnesium content is less than that of calcium, EDTA can be used as titrant, magnesium being masked with acetylacetone.     

Gel-phase 19F NMR spectral quality for resins commonly used in solid-phase organic synthesis; a study of peptide solid-phase glycosylations

The spectroscopic properties for seven different commercial resins used in solid-phase synthesis were investigated with (19)F NMR spectroscopy. A fluorine-labeled dipeptide was synthesized on each resin, and the resolution of the (19)F resonances in CDCl(3), DMSO-d(6), benzene-d(6) and CD(3)OD were measured with a conventional NMR spectrometer, i.e. without using magic angle spinning. In general, resins containing poly(ethylene glycol) chains (ArgoGel, TentaGel and PEGA) were found to be favorable for the (19)F NMR spectral quality. Three serine containing tri-, penta-, and heptapeptides were then prepared on an ArgoGel resin functionalized with a fluorine-labeled linker. The resin bound peptides were glycosylated utilizing a thiogalactoside glycosyl donor carrying fluorine-labeled protective groups. Monitoring of the glycosylations with gel-phase (19)F NMR spectroscopy allowed each glycopeptide to be formed in similar 80% yield, using a minimal amount of glycosyl donor (3 x 2 equivalents). In addition, it was found that the glycosylation yields were independent of peptide length.