Application of sampled-d.c. anodic stripping voltammetry to metal/fulvic acid equilibria

The use of anodic stripping voltammetry (ASV) to determine the labile metal fraction in metal/ fulvic acid equilibrium systems is discussed. A method is described for distinguishing between the contributions of processes in the reduction and oxidation steps to the observed anodic (stripping) current. This method, which facilitates separate examination of the two processes, is based on timed addition of fulvic acids during the deposition step, on pH control, and on measurement of sampled-d.c. ASV peak areas (Faradaic charge) for metal/fulvic acid solutions. Results are presented for copper(Il) and lead(Il) complexes with six colloid-free soil-derived fulvic acids. In contrast to differential-pulse ASV, the stripping current measured by sampled-d.c. ASV showed no measurable contribution from ligand adsorption on the mercury drop. For heterogeneous ligand systems, such as fulvic acid, use of stripping peak heights over-estimates the fraction of non-labile metal complex because peak broadening results from the range of complexes formed in the anodic step.     

Contribution à la phytochimie du genre Gentiana. XXVI.. Identification d'une nouvelle di-O-glucosyl cinnamoyl-C-glucosylflavone extraite des feuilles de Gentiana X marcailhouana RY.

Phytochemistry of Genus Gentiana. XXVI. Identification of a New Di-O-glucosyl Cinnamoyl-C-glucosylflavone in the Leaves of Gentiana X marcailhouana RY . A new di-O-glucosyl cinnamoyl-C-glucosylflavone has been identified as 4′-O-β-D -glucosyl-2″-O-[2-O-β-D -glucosyl-2,4,5-trihydroxy-(E)-cinnamoyl]isoorientin ( 1 ).     

Derivatives and reactions of glutacondialdehyde V : The crystal and molecular structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate. The charge distribution in the glutacondialdehyde anion

The structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate has been determined, using three-dimensional diffractometercollected X-ray data. The compound has the all-trans configuration with the atoms C-1 to C-5 in a plane. The charge distribution in the acetate and in the glutacondialdehyde anion have been calculated using the CNDO/2 approximation. In both compounds higher negative charges were found on carbon atoms C-2 and C-4 than on C-1, C-3 and C-5.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

A bifunctional platinum(II) complex capable of intercalation and hydrogen-bonding interactions with DNA: binding studies and cytotoxicity

The interactions of [Pt(CNN)(4-dpt)]PF(6), (1; 4-dpt=2,4-diamino-6-(4-pyridyl)-1,3,5-triazine, HCNN=6-phenyl-2,2'-bipyridine) with double-stranded DNA, poly(dA-dT)(2), and poly(dG-dC)(2) were examined by spectroscopic, electrophoretic, and hydrodynamic methods. The spectroscopic data were analyzed with McGhee, van't Hoff, and Gibbs-Helmholtz equations. In a comparative study, [Pt(CNN)(py)]PF(6) (2; py=pyridine) was prepared and the nature of its binding towards DNA was investigated [preliminary results: ChemBioChem 2003, 4, 62-68]. For reactions with calf thymus DNA at 20 degrees C, the intrinsic binding constants for 1 and 2 are (4.6+/-0.2)x10(5) and (2.3+/-0.3)x10(4) mol(-1) dm(3), respectively. Results of DNA-binding reactions revealed that 1 and 2 preferentially bind to the AT sequence of duplex DNA. Intercalation is the preferred binding mode for 2, whereas both intercalation and minor-groove binding are observed for 1. Complex 1 is cytotoxic against a number of carcinoma cell lines, including KB-3-1, CNE-3, and HepG2, and remains potent against multidrug- or cisplatin-resistant KB-V-1 and CNE1 cell lines, for which the resistance ratios are 1.6 and 1.5, respectively. Importantly, 1 is almost an order of magnitude less toxic to the normal cell line CCD-19Lu (IC(50)=176+/-1.7 microM) and it selectively induced apoptosis leading to cancer cell death with less than 5 % detectable necrosis.     

The reactions of 2-benzoylpyridine with [RuHCl(CO)(PPh3)3] and [(C6H6)RuCl2]2

The reactions of [RuHCl(CO)(PPh₃)₃] and [(C₆H₆)RuCl₂]₂ with 2-benzoylpyridine have been examined, and two novel ruthenium(II) complexes – [RuCl(CO)(PPh₃)₂(C₅H₄NCOO)] and [RuCl₂(C₁₂H₉NO)₂] – have been obtained. The compounds have been studied by IR and UV–Vis spectroscopy, and X-ray crystallography. The molecular orbital diagrams of the complexes have been calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compounds have been calculated with the time-dependent DFT method, and the UV–Vis spectra of the compounds have been discussed on this basis.     

Sc(OTf)3-catalyzed efficient synthesis of beta,beta-bis(indolyl) ketones by the double indolylation of acetic acid 2-methylene-3-oxobutyl ester

In the presence of 5 mol% Sc(OTf)3, double indolylation of acetic acid 2-methylene-3-oxo-butyl ester with differently substituted indoles readily afforded beta,beta-bis(indolyl) ketones. The reaction may proceed via a Sc(OTf)3-catalyzed SN2'-type substitution and subsequent conjugate addition.     

Linear-quadratic stochastic pursuit-evasion games

A linear-quadratic differential game in which the system state is affected by disturbance and both players have access to different measurements is solved. The problem is first converted to an optimization problem in infinite-dimensional state space and then solved using standard techniques. For convenience, L ₂-white noise instead of Wiener process setup is used.     

On states on the product of logics

We take up the question of when a state (= -additive measure) on the product of logics (=-orthomodular posets) depends on at most countably many coordinates. We show that it is always so provided there are no real-measurable cardinals. The manner of dependence is a kind of convex combination. We derive some consequences of the latter statement.