Environmental biodegradation of synthetic polymers I. Test methodologies and procedures

Biodegradation of synthetic polymers is an important property that is used in many applications. Evaluation of the extent of biodegradation has used different methods in recent years. For each environmental compartment, different approaches have to be made in order to obtain valuable data on biodegradability.This review describes validated and accepted methods based on standardized biodegradation tests, analytical tests, enzymatic tests or tests of physical properties to evaluate the biodegradability of synthetic polymers for different types of environmental compartments (e.g., soil, compost or aqueous media).Part II of this review will subsequently report on the environmental biodegradation of different groups of synthetic polymers.     

One step synthesis of Diflunisal using a Pd-diamine complex

Diflunisal and Felbinac, two FDA-approved NSAIDs and other biphenyl carboxylic acids were prepared in one step by a simple and clean Suzuki cross-coupling reaction using an easily synthesized, air and moisture stable, palladium-diamine complex. The yield (93%) for the one-step preparation of Diflunisal is the best reported without using a glovebox and a phoshine-based catalyst.      

Surface-induced dissociation and chemical reactions of C2D 4 + on stainless steel, carbon (HOPG), and two different diamond surfaces

Surface-induced interactions of the projectile ion C₂D₄⁺ with room-temperature (hydrocarbon covered) stainless steel, carbon highly oriented pyrolytic graphite (HOPG), and two different types of diamond surfaces (O-terminated and H-terminated) were investigated over the range of incident energies from a few eV up to 50 eV. The relative abundance of the product ions in dependence on the incident energy of the projectile ion [collision-energy resolved mass spectra, (CERMS) curves] was determined. The product ion mass spectra contained ions resulting from direct dissociation of the projectile ions, from chemical reactions with the hydrocarbons on the surface, and (to a small extent) from sputtering of the surface material. Sputtering of the surface layer by low-energy Ar⁺ ions (5–400 eV) indicated the presence of hydrocarbons on all studied surfaces. The CERMS curves of the product ions were analyzed to obtain both CERMS curves for the products of direct surface-induced dissociation of the projectile ion and CERMS curves of products of surface reactions. From the former, the fraction of energy converted in the surface collision into the internal excitation of the projectile ion was estimated as 10% of the incident energy. The internal energy of the surface-excited projectile ions was very similar for all studied surfaces. The H-terminated room-temperature diamond surface differed from the other surfaces only in the fraction of product ions formed in H-atom transfer surface reactions (45% of all product ions formed versus 70% on the other surfaces).     

Studies on the mechanism of decomposition of 1-methyl-1-(1-naphthyl)ethyl hydroperoxides to 2-(1-naphthyloxy)propenes

Abstract  

Thermal decomposition of 1-methyl-1-(4-methyl-1-naphthyl)ethyl hydroperoxide under gas chromatography-mass spectroscopy (GC–MS) conditions gives 2-((4-methyl-1-naphthyl)oxy)propene as the main product (50.5%), without any detectable traces of the isomeric 2-((5-methyl-1-naphthyl)oxy)propene. This finding excludes the rearrangement pathway of 1-methyl-1-(1-naphthyl)ethyl hydroperoxides to the corresponding 2-(1-naphthyloxy)propenes, which involves formation of a naphthofuran derivative as an intermediate and transfer of the isopropenyloxy group to the 8 position. This result, as well as our previous density functional theory (DFT) calculations, points to the rearrangement pathway involving an oxirane-type intermediate as the most plausible pathway to 2-(1-naphthyloxy)propenes. This rearrangement is responsible for the unusual inhibition effects of 1-methyl-1-(1-naphthyl)ethyl hydroperoxide on the liquid-phase oxidation of isopropylarenes with oxygen.     

Comparison of photodynamic efficacy of tetraarylporphyrin pegylated or encapsulated in liposomes: In vitro studies

Two photosensitizing systems: (1) tetrakis(4-hydroxyphenyl)porphyrin (p-THPP) encapsulated in sterically stabilized liposomes (SSL) and (2) p-THPP functionalized by covalent attachment of poly(ethylene glycol) (p-THPP–PEG₂₀₀₀) were studied in vitro. The dark and photo cytotoxicity of these systems were evaluated on two cell lines: HCT 116, a human colorectal carcinoma cell line, and DU 145, a prostate cancer cell line and compared with these determined for free p-THPP. It was demonstrated that both encapsulation in liposomes as well as attachment of PEG chain result in pronounced reduction of the dark cytotoxicity of the parent porphyrin. The liposomal formulation showed higher than p-THPP–PEG₂₀₀₀ photocytotoxicity towards both cell lines used in the studies.     

Coordination chemistry of 5,6,7-trimethyl-[1,2,4]triazolo[1,5-a]pyrimidine with first-row transition-metal salts: Synthesis, spectroscopy and single-crystal structures, with counter-anion dependence of the structures

A variety of new coordination compounds with transition-metal salts and the ligand trimethyl[1,2,4]triazolo[1,5-a]pyrimidine (abbreviated as tmtp) is described, together with several of their 3D crystal structures and spectroscopic and magnetic properties. The compounds were selected based on the coordination ability of the counterion, halide, nitrate, sulfate, thiocyanate and perchlorate. The formed coordination compounds and their coordination numbers were found to be strongly dependent on both the cation and the used counter-anion. The several compounds studied have the following structural formulae: [CuCl₂(tmtp)₂], [CuBr₂(tmtp)₂], [ZnBr₂(tmtp)₂], [Cu(NO₃)₂(tmtp)₂], [CuSO₄(tmtp)₂]₂(H₂O)(MeOH), [Cu(H₂O)(NCS)₂(tmtp)₂], [Zn(NCS)₂(tmtp)₂], [Cd(NCS)₂(tmtp)₂] and [M(H₂O)₂(tmtp)₄](BF₄)₂, in which M = Co, Ni, Zn.The new coordination compounds have been further characterized by NMR, (far-)IR and LF spectra, as well as by C, H, N element analyses, and EPR spectra for the Cu(II) compounds. The coordination around the metal varies from 4 (Zn, Cu), via 5 (Cu) to 6 (for Co, Cu and Cd). The anions usually complete the coordination sphere; only the Co and Zn compounds with the tetrafluoridoborate anions have no coordinated anions, but water ligands complete the octahedral coordination sphere. In the 5-coordinated [Cu(H₂O)(NCS)₂(tmtp)₂] water completes the square pyramid geometry.     

Current applications and future trends of molecular diagnostics in clinical bacteriology

Molecular diagnostics of infectious diseases, in particular, nucleic-acid-based methods, are the fastest growing field in clinical laboratory diagnostics. These applications are stepwise replacing or complementing culture-based, biochemical, and immunological assays in microbiology laboratories. The first-generation nucleic acid assays were monoparametric such as conventional tests, determining only a single parameter. Improvements and new approaches in technology now open the possibility for the development of multiparameter assays using microarrays, multiplex nucleic acid amplification techniques, or mass spectrometry, while the introduction of closed-tube systems has resulted in rapid microbial diagnostics with a subsequently reduced contamination risk. Whereas the first assays were focused on the detection and identification of microbial pathogens, these new technologies paved the way for the parallel determination of multiple antibiotic resistance determinants or to perform microbial epidemiology and surveillance on a genetic level.     

Magnetic field effect on chemical compositions of spherical Fe/Co fine particles synthesized from a gaseous mixture of iron pentacarbonyl and cobalt tricarbonyl nitrosyl

Under UV light irradiation on a gaseous mixture of Fe(CO)₅ and Co(CO)₃NO, both the crystalline deposits with sizes of 5 and 18 μm and the spherical particles with a mean diameter of 0.3 μm were produced. From FT-IR spectra and SEM–EDS analysis, it was suggested that the chemical structure of the crystalline deposits was the one of Fe₂(CO)₉ being modified by involving Fe(CO)Co bond. By decreasing a partial pressure of Fe(CO)₅ to 0.5 Torr in the gaseous mixture, only the spherical aerosol particles could be produced. Chemical composition of the particles was rich in Co species. From the disappearance of bridging CO band in the FT-IR spectra of the particles and the appearance of CO bands coordinated to a metal atom, Fe atom in Fe(CO)₄ was suggested to be coordinated by the O atom in bridging CO bond in Co(CO)Co structure and/or in α-diketone structure which was formed from two CO groups in dicobalt species. Chemical compositions of the crystalline deposits and the spherical particles were influenced differently by the application of a magnetic field. Atomic ratio of Fe to Co atom decreased in the crystalline deposits whereas it increased in the spherical particles with increasing magnetic field up to 5 T. Linearly aggregated particles (i.e., particle wires) as long as 30 μm were produced on the front side of a glass plate placed at the bottom of the irradiation cell.     

Tetrathiafulvalene Porphyrins

Four tetrathiafulvalene (TTF)‐annulated porphyrins 1 – 4 were synthesized and characterized. All contain a tetraphenylporphyrin (TPP) core onto which four, two, or one TTF subunits were annulated. Absorption and fluorescence spectroscopic studies together with electrochemical investigations reveal that interactions between the porphyrin system and the annulated TTF units take place in solution. The annulation of one or more TTF units to the porphyrin core has a profound effect on the reduction potentials associated with this latter framework, with positive shifts in the range of 0.105 to 0.355 V and 0.200 to 0.370 V for the first and second reduction potential, respectively, compared to the corresponding processes in the model compound TPP, 18 . The redox potentials for the first oxidation of the TTF units are considerably shifted in 4 (ΔE_ox¹=+0.285 V) and 2 (ΔE_ox¹=?0.140 V), whereas for 1 and 3 these potentials remain within the region expected for a normal TTF unit. Considerable changes in the second oxidation potential associated with the TTF subunits were seen for 2 (ΔE_ox¹=?0.085) and 3 (ΔE_ox¹=?0.175). The emission spectra of 1 – 4 revealed that the porphyrin fluorescence is almost quenched in the neutral state of the TTF‐annulated porphyrins, a finding that is consistent with substantial electron transfer taking place from the TTF subunits to the porphyrin core. Oxidation of the TTF unit(s) (TTF→TTF^.+) present in 1 – 4 leads to the emission intensity being restored.     

Asymmetric Organocatalytic Domino Michael/Aldol Reactions: Enantioselective Synthesis of Chiral Cycloheptanones,Tetrahydrochromenones, and Polyfunctionalized Bicyclo[3.2.1]octanes

C′mon 1,2‐dione : A new diastereo‐ and enantioselective Lewis base catalyzed domino Michael/aldol reaction converts α,β‐unsaturated aldehydes and 1,2‐diones into chiral bicyclo[3.2.1]octane‐6‐carbaldehydes. The products are produced in good to excellent enantioselectivities (90–98 % ee) and can be transformed into bicyclic diols and triols. Additionally, a retro‐aldol cyclization provides access to valuable tetrahydrochromenones (see scheme).