Synthesis,characterization and antimicrobial activity of pentagonal-bipyramidal isothiocyanato Co(II) and Ni(II) complexes with 2,6-diacetylpyridine bis(trimethylammoniumacetohydrazone)

Pentagonal-bipyramidal isothiocyanato Co(II) and Ni(II) complexes with condensation product of 2,6-diacetylpyridine and trimethylammoniumacetohydrazide (Girard’s T reagent) were synthesized and characterized by elemental analyses, IR and UV–vis spectra, molar conductivity, and magnetic susceptibility. Crystal structures of the Co(II) and Ni(II) complexes were also determined. Antimicrobial activities of the ligand and metal complexes were examined.     

Timing performance of ZnO:Ga nanopowder composite scintillators

The implementation of nanocrystal‐based composite scintillators as a new generation of ultrafast particle detectors is explored using ZnO:Ga nanopowder. Samples are characterized with a spectral‐time resolved photon counting system and pulsed X‐rays, followed by coincidence time resolution (CTR) measurements under 511 keV gamma excitation. Results are comparable to CTR values obtained using bulk inorganic scintillators. Bringing the ZnO:Ga nanocrystal's timing performance to radiation detectors could pave the research path towards sub‐20 ps time resolution as shown in this contribution. However, an efficiency boost when placing nanopowders in a transparent host constitutes the main challenge in order to benefit from sub‐nanosecond recombination times. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

An online nano‐LC‐ESI‐FTICR‐MS method for comprehensive characterization of endogenous fragments from amyloid β and amyloid precursor protein in human and cat cerebrospinal fluid

Amyloid precursor protein (APP) is the precursor protein to amyloid β (Aβ), the main constituent of senile plaques in Alzheimer's disease (AD). Endogenous Aβ peptides reflect the APP processing, and greater knowledge of different APP degradation pathways is important to understand the mechanism underlying AD pathology. When one analyzes longer Aβ peptides by low‐energy collision‐induced dissociation tandem mass spectrometry (MS/MS), mainly long b‐fragments are observed, limiting the possibility to determine variations such as amino acid variants or post‐translational modifications (PTMs) within the N‐terminal half of the peptide. However, by using electron capture dissociation (ECD), we obtained a more comprehensive sequence coverage for several APP/Aβ peptide species, thus enabling a deeper characterization of possible variants and PTMs. Abnormal APP/Aβ processing has also been described in the lysosomal storage disease Niemann–Pick type C and the major large animal used for studying this disease is cat. By ECD MS/MS, a substitution of Asp7 → Glu in cat Aβ was identified. Further, sialylated core 1 like O‐glycans at Tyr10, recently discovered in human Aβ (a previously unknown glycosylation type), were identified also in cat cerebrospinal fluid (CSF). It is therefore likely that this unusual type of glycosylation is common for (at least) species belonging to the magnorder Boreoeutheria. We here describe a detailed characterization of endogenous APP/Aβ peptide species in CSF by using an online top‐down MS‐based method. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigation of operational parameters for an industrial CFB combustor of coal, biomass and sludge

The combustion of coal and/or biomass （sludge, wood waste, RDF, etc.） in a circulating fluidized bed has been a commercial topper for over 20 years, and references to principles and applications are numerous and widespread although few data are presented concerning the operation of large scale CFB-units. The authors studied the CFB-combustion at UPM-Kymmene （Ayr）, a major paper mill relying for its steam production upon the combustion of coal （80-85 %）, wood bark （5-10%） and wastewater treatment sludge （5-10%）. The maximum capacity of the CFB is 58 MWth. A complete diagnostic of the operation was made, and additional tests were performed to assess the operating mode. The plant schematics, relevant dimensions and process data are given. To assess the operation of the UPM-CFB, it is important to review essential design parameters and principles of CFB combustors, which will be discussed in detail to include required data, heat balance and flowrates, operating versus transport velocity, kinetics and conversion （including the possible effect of the Bouduard reaction if carbon is present）. Since the residence time in the riser and the cyclone efficiency determine the burnout of circulating fuel-particles, the UPM-CFB was subjected to a stimulus response technique using nickel oxide as tracer. Results illustrate the efficiency of the cyclone separation and the number of recycle loops for particles of a given size. Results will also be used to assess the cyclone operation and efficiency and to comment upon expected and measured carbon conversion.     

Vanadium (V) is reduced by the 'as isolated' nitrogenase Fe-protein at neutral pH

Orthovanadate has been investigated in the presence of the nitrogenase Fe-protein. Electron paramagnetic resonance (EPR) spectra demonstrate that vanadium (V) is reduced by the reduced Fe-protein to vanadium (IV) which then probably binds to the nucleotide binding site in place of the Mg2+ which is normally present. In contrast, the oxidized Fe-protein is unable to reduce vanadate. In this case vanadate has potential for use as a phosphate analogue where it acts as transition state mimic for hydrolysis.     

On-line single column capillary gas chromatographic analysis of all reactants and products in the synthesis of fuel methanol from hydrogen and oxides of carbon

The main problems with complete analysis of the components of fuel methanol, or in Fischer-Tropsch studies, are the several classes of compound present in the sample (permanent gases, water, alcohols, hydrocarbons), its wide range of components, its boiling point range, and the wide range of component concentrations. A flexible on-line GC method has been developed for kinetic study of catalyzed chemical reactions of hydrogen and oxides of carbon. The single capillary column, temperature programmed method was designed for complete analysis of reactants and products (hydrogen, carbon monoxide, carbon dioxide, water, C₁-C₁₀ hydrocarbons, and C₁-C₆ alcohols): a sample selection valve is used to switch between either the heated line used for input of the synthesis gases or the heated line used to transport reaction products from the reactor. Sample is introduced to the capillary column by means of a 10-port heated gas sampling valve with two external injection loops (0.07 and 1.95 cm³); this results in the determination of components over a wide range of concentrations in the sample (ppm to percentage levels). Helium from a pressure-controlled supply is used as carrier gas and detection of the components is performed by serial connection of thermal conductivity and flame ionization detectors. Peak identification is performed by mass spectrometry and by comparison of component retention times. The automated analytical equipment is integrated with a process control computer and delivers repeatable analytical results for the individual components (RSDs varying between 0.3 and 10% depending strongly on the concentration of the component and the accuracy of the determination of its peak area).     

Recent Advances in Polyurethane/POSS Hybrids for Biomedical Applications

Advanced organic-inorganic materials-composites, nanocomposites, and hybrids with various compositions offer unique properties required for biomedical applications. One of the most promising inorganic (nano)additives are polyhedral oligomeric silsesquioxanes (POSS); their biocompatibility, non-toxicity, and phase separation ability that modifies the material porosity are fundamental properties required in modern biomedical applications. When incorporated, chemically or physically, into polyurethane matrices, they substantially change polymer properties, including mechanical properties, surface characteristics, and bioactivity. Hence, this review is dedicated to POSS-PU composites that have recently been developed for applications in the biomedical field. First, different modes of POSS incorporation into PU structure have been presented, then recent developments of PU/POSS hybrids as bio-active composites for scaffolds, cardiovascular stents, valves, and membranes, as well as in bio-imaging and cancer treatment, have been described. Finally, characterization and methods of modification routes of polyurethane-based materials with silsesquioxanes were presented.     

Iridium‐ and Osmium‐decorated Reduced Graphenes as Promising Catalysts for Hydrogen Evolution

Renewable energy sources are highly sought after as a result of numerous worldwide problems concerning the environment and the shortage of energy. Currently, the focus in the field is on the development of catalysts that are able to provide water splitting catalysis and energy storage for the hydrogen evolution reaction (HER). While platinum is an excellent material for HER catalysis, it is costly and rare. In this work, we investigated the electrocatalytic abilities of various graphene–metal hybrids to replace platinum for the HER. The graphene materials were doped with 4f metals, namely, iridium, osmium, platinum and rhenium, as well as 3d metals, namely, cobalt, iron and manganese. We discovered that a few hybrids, in particular iridium‐ and osmium‐doped graphenes, have the potential to become competent electrocatalysts owing to their low costs and—more importantly—to their promising electrochemical performances towards the HER. One of the more noteworthy observations of this work is the superiority of these two hybrids over MoS₂, a well‐known electrocatalyst for the HER.     

The formation of [CH5O]+ and ions from the molecular ions of isobutyl alcohol

On the basis of field ionization kinetic and deuterium labelling experiments, it is shown that the molecular ions of isobutyl alcohol generate [CH₅O]⁺ ions at 10^?11 s via a 1,4-shift of a hydrogen atom from one of the methyl groups to the oxygen atom, followed by a 1,2-elimination of protonated methanol with a hydrogen atom of the other methyl group. At times > 10^?11 s two distinct interchange processes between hydrogen atoms appear to compete with this reaction, as shown from field ionization kinetic experiments and metastable decompositions. Ion cyclotron resonance experiments on the long-lived [CH₅O]⁺ ions further demonstrate that they are protonated methanol ions. Arguments are put forward that the ions, generated by a specific 1,3-elimination of a molecule of water from metastable decomposing molecular ions, have an isobutene structure.     

Synthesis, electronic, and electro-optical properties of emissive solvatochromic phenothiazinyl merocyanine dyes

Phenothiazinyl merocyanine dyes with variable substitution patterns on the peripheral benzene ring were synthesized in good yields by Knoevenagel condensation of the corresponding phenothiazinyl aldehydes and N-methylrhodanine or indan-1,3-dione. The electronic properties were investigated by cyclic voltammetry, absorption, electro-optical absorption, and emission spectroscopy. All these merocyanines reveal reversible redox behavior that stems from the phenothiazinyl-centered oxidation to give stable radical cations. The redox potentials strongly correlate with Hammett σ(p) parameters. All merocyanines reveal large Stokes shifts. They also display a pronounced emissive solvatochromism, which is caused by large dipole moment changes upon excitation from the ground to the excited state. These findings are supported by solvatochromism studies and time-dependent DFT computations.