Phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol in the presence of either 2,4,6-trimethylphenol or 4-tert-butyl-2,6-dimethylphenol

The synthesis of poly(2,6-dimethyl-1,4-phenylene oxide) with one 2,6-dimethylphenol chain end (PPO–OH) and with well-defined molecular weight by phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol ( 20 ) in the presence of either 2,4,6-trimethylphenol ( 1 ) or 4-t-butyl-2,6-dimethylphenol ( 1 ′) as chain initiators is described. The range of controllable molecular weights and the mechanism of molecular weight control are discussed based on the differences between the reactivities of 20 , 1 , and 1 ′ and of the corresponding reactive species. The PPO–OH synthesized from 20 / 1 ′ has structural units derived from 1 ′ attached only at the chain end. PPO–OH synthesized from 20 / 1 contains structural units derived from 1 both internally and at the chain ends. Structural units derived from side reactions were identified by ¹H-NMR spectroscopy. A reaction mechanism is proposed to account for their formation.     

Comparative study of azobenzene and stilbene bridged crown ether p-tert-butylcalix[4]arene

Photo-switchable calixarenes consisting of a stilbene or azobenzene bridge, spanning the narrow rim as a switching unit, were synthesized through reductive coupling of o-, m- and p-bis-benzaldehyde and bis-nitrobenzene-substituted calix[4]arenes. Both cis- and trans-stilbenes were produced from the reductive coupling of the o- and m-bis-benzaldehyde with the cis isomer being predominant for both regioisomers, whilst the coupling of p-bis-benzaldehyde gave only cis product. On the other hand, the only isolable product obtained from the reductive coupling of bis-o- and bis-m-nitrobenzene was the corresponding trans-azobenzene and the coupling product from bis-p-nitrobenzene was not stable. Each of the synthesized compounds showed a photostationary state in their cis-trans isomerization. The complexation of alkali metal ions was observed for only the o-azobenzene derivative suggesting that the lone pair of N-atom in the azo bridge participates in this process.     

Nitration of dithieno[3,4-b:3′,2′-d]pyridine and dithieno[2,3-b:3′,2′-d]pyridine

The nitration of dithieno[3,4-b:3′,2′-d]pyridine ( 2 ) and dithieno[2,3-b:3′,2′-d]pyridine ( 3 ) has been studied. Nitration of 2 occurred in both positions of the c-fused thiophene ring, while 3 was predominantly substituted in the 2-position. The structures of the nitro derivatives were proven by extensive use of ¹H and ¹³C nmr spectroscopy.     

Photon-induced dissociation with a four-sector tandem mass spectrometer

The feasibility of using photodissociation of protonated peptide molecules to sequence specific fragment ions with a 193-nm pulsed laser beam in a magnetic deflection tandem mass spectrometer of EBEB configuration was demonstrated. Although the short pulse (15 ns) and low repetition rate (100 Hz) of the excimer laser permitted the irradiation of only ～ 0.02% of the (M + H)⁺ ions exiting MS-1, a photon-induced decomposition spectrum of the heptapeptide angiotensio III (M _r 930.5) was produced that was practically the same (but with better signal-to-noise ratio) as that generated by collision-activated dissociation at the same low duty cycle. Because of the low and pulsed fragment ion currents, an array detector was used to record the spectra. A dependence between laser power and abundance of fragment ions was observed (increased power increases the relative abundance of ions of low mass). Laser power was varied from 6 to 80 mJ. Formation of fragment ions from a large peptide (melittin, M, 2844.75) was also observed. The results permit the design of modifications that may increase the fragment ion yield to 10% or higher, which would make photon-induced decomposition a useful method for magnetic deflection mass spectrometers.     

Non empirical quantum mechanical calculations of the1H,13C,15N and17O magnetic shielding constants and of the spin-spin coupling constants in formamide,hydrated formamide and N-methylformamide

The magnetic shielding constants of the different atoms of formamide, hydrated formamide and N-methylformamide are calculated by anab initio method. For the protons of formamide the measured differences between their chemical shifts are correctly reproduced by theory, provided that the molecular geometry used as input is carefully chosen. The differences between the values of the magnetic shielding constants calculated for formamide and hydrated formamide show that intermolecular hydrogen bonding produces variations of chemical shifts for all the atoms of the molecule except the formyl proton. The calculated chemical shift variations between formamide and N-methylformamide are compared to the experimental values and discussed in relation with different hydrogen bonding possibilities of the two molecules. The calculation of the contact term of the spin-spin coupling constants of formamide and hydrated formamide shows that in most cases the measured trends are satisfactorily reproduced and that the variations of these terms upon hydration are less than 3%.     

Investigation of the asymmetric ionic Diels-Alder reaction for the synthesis of cis-decalins

The ionic Diels-Alder reaction, whereby an alpha,beta-unsaturated acetal in combination with a Lewis or Bronsted acid forms an equilibrium concentration of an activated dienophile, has been developed to provide an enantioselective synthesis of cis-decalins. Cyclohex-2-enone type chiral acetals of (2R,3R)-butane-2,3-diol have been screened against Lewis and Br?nsted acids with a variety of dienes and are efficient for the synthesis of a limited subset of cis-decalin structures. Diastereoselectivities of 73% and 82% have been found for the asymmetric ionic Diels-Alder reaction between the chiral acetal derivatives of cyclohex-2-enone (6) and 2-methylcyclohex-2-enone (18) with 2,3-dimethyl-1,3-butadiene (7). Terminal substituents on the diene partner in general render the system unreactive. However a synthetically useful cis-decalin 31, derived from the reaction of 2-methylcyclohex-2-enone and Z-3-t-butyldimethyl-silyloxypenta-1,3-diene has been prepared in enantiomerically pure form in 74% isolated yield using this asymmetric ionic Diels-Alder protocol.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

Steric interactions mediated by multiblock polymers and biopolymers: role of block size and addition of hydrophilic side chains

To a first approximation, the primary structure of many food proteins maybe thought of as a sequence of short hydrophobic and hydrophilic blocks. The influence of this type of structure on the steric-stabilising properties of such proteins has been considered here. In line with previous studies, using Self-Consistent-Field calculations, it has been shown that the presence of such protein molecules can lead to attraction and consequently bridging flocculation of colloidal particles. In the low adsorption energy limit for the hydrophobic groups (−1k_BT), it is found that the steric potential is significantly influenced by the changes in the number of adsorbed segments, as two surfaces are brought together. This is in contrast to the well-known results in the literature for the high adsorption limiting cases, where the number of such segments remains constant. In particular, the changes in the number of adsorbed hydrophobic units are observed not to be a monotonic function of the separation distance, but increase or decrease in reasonable accord with the oscillatory nature of the steric interactions, observed for various block sizes. Effects of the addition of a moderately sized hydrophilic side chain to the above molecules have also been studied. It is found that, in principle, such a modification can lead to a purely repulsive steric potential in solutions of these hybrid biopolymers. At the hydrophilic side chain sizes considered here, the surface affinity of the molecules is observed not to be drastically different compared to those of unmodified proteins.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2004, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC) - a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?