Inside-Needle Extraction Method Based on Molecularly Imprinted Polymer for Solid-Phase Dynamic Extraction and Preconcentration of Triazine Herbicides Followed by GC–FID Determination

An inside-needle extraction method was developed through thermal polymerization of atrazine-molecularly imprinted polymer (MIP) on the internal surface of a stainless steel hollow needle, which was oxidized and silylated. The fabricated coating (MIP layer) for the needle was durable and showed very good chemical and thermal stability. It could be mounted on a glass syringe and be directly coupled with gas chromatographic (GC) systems. The parameters being effective on the coating and extraction processes, namely nature of oxidizing agent, silylation time, nature and amount of porogen, template-to-MIP components ratio, polymerization time and temperature, sample volume, flow rate, pH and ionic strength of the sample were investigated and optimized. The extraction needle showed high selectivity as well as a great extraction capacity for triazines. The extraction of atrazine, simazine, cyanazine, ametryn, prometryn and terbutryn using the fabricated extraction needle and followed by GC analysis resulted in detection limits of 2.6, 21, 24, 32, 38 and 42 ng mL⁻¹, respectively. The fabricated needle proved to be applicable to the analysis of real samples by comparing the results obtained for non-spiked and spiked samples of grape juice, tap water and groundwater.

     

Determination of primordial radionuclide concentrations in UAE groundwater using high-resolution gamma-ray spectrometry

Journal of Radioanalytical and Nuclear Chemistry - Groundwater is the most valuable resource in arid regions, such as UAE. Estimations of natural radionuclide concentrations are important to...     

Spectral and Thermal Studies of Some New Metal Complexes Derived from N-[(Phenylamino)Thioxomethyl] Hydrazinocarbonyl Methyl Pyridinium Chloride (PTHMPC)

New metal complexes derived from the reaction of N-[(phenylamino)thioxomethyl] hydrazino carbonyl methyl pyridinium chloride (H₂L; PTHMPC) with some metal salts of the general formula MX₂ [(X = Cl^? and/or CH₃COO^?; M = Cd(II), UO₂(II), Mn(II) and Zr(IV)] were synthesized and characterized by elemental analyses, spectral analyses (IR, UV-vis., ¹H NMR), thermal analyses (TGA, DTG), and conductance and magnetic measurements. The results showed that the ligand exists in metal complexes either in the keto form or in the enol form. Moreover, the IR spectral data suggest that the acetate ion behaves in a monodentate manner. Semi-empirical calculations ZINDO/1, PM3, and AM1 have been used to study the molecular geometry and the harmonic vibrational spectra of the ligand and its metal complexes with the purpose of assisting the experimental assignment of the complexes. Generally, there is an agreement between the observed and the calculated spectra. Finally, the thermodynamic parameters (ΔE*, ΔH, ΔG, and ΔS) have been calculated from the data of thermal analyses (TGA and DTG).

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

The First Mitsunobu Protocol for Efficient Synthesis of α-Acyloxyphosphonates Using 4,4′-Azopyridine

Abstract

This is the first report on applying the Mitsunobu protocol for the synthesis of various α-acyloxyphosphonates using 4,4′-azopyridine and PPh₃ with diverse aromatic and aliphatic carboxylic acids. Under these conditions, diethyl azodicarboxylate (DEAD) as the traditional reagent for Mitsunobu reaction is not efficient. The insoluble pyridine hydrazine byproduct can be simply isolated and recycled to its azopyridine by an oxidation reaction and reused again.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Characterization data of compounds 3a–3z2 and NMR spectra.]

GRAPHICAL ABSTRACT      

Novel toughened automotive clearcoats modified by a polyester‐amide hyperbranched polymer: structural and mechanical aspects

The present work attempts to study the mechanical properties and toughness behavior of a typical acrylic melamine clearcoat modified by a polyester‐amide hyperbranched polymer (HBP). Formulations were such that 0, 5, 10, 25 and 50% (molar percent) of total acrylic hydroxyl groups were stoichiometrically substituted by those of HBP. Bulk and surface of the clearcoats were studied by various mechanical techniques including hardness, tensile, dynamic mechanical thermal analysis (DMTA), nano‐indentation and scratch tests. In addition a scanning electron microscope (SEM) was utilized to observe the morphology of the fractured films. The bulk mechanical properties showed that a low loading (5 molar %) of HBP was sufficient to considerably increase the bulk hardness, cross‐linking density and toughness. DMTA and SEM results proved the occurrence of a single‐phase blend and that the shear deformation was the main toughening mechanism of HBP modified clearcoats. In general, it was revealed that the HBP not only could act as an excellent compatible toughening agent, but also maintained the clarity of the clearcoat and increased its scratch resistance. Copyright © 2013 John Wiley & Sons, Ltd.     

Silicon-Containing Condensation Polymers Derived from Long-Chain Fatty Acids

Silicon-containing condensation polymers were prepared starting from difunctional silicon-containing carboxylic acids or diols derived from long-chain fatty acids. Polyesters were synthesized by reaction of diacids containing siloxane linkages with diols, and diols containing siloxane linkages with various diacids. 1,3-Bis (10-carboxydecyl)tetramethyldisiloxane was condensed with various diamines to yield polyamides. 1,3-Bis(11-hydroxyundecyl)tetramethyldisiloxane and 1,3-bis [9(10)-hydroxyoctadecyl]tetramethyldisiloxane were condensed with diisocyanates to yield polyurethanes. Polycarbonates were synthesized by reacting the diols containing siloxane linkages with ethyl chloroformate. Some polybenzimidazols were synthesized by heating the diesters of the silicon-containing carboxylic acids with 3,3′ -diaminobenzidine. Some of the polyurethanes and polybenzimidazoles were thermally stable up to 300°C as indicated by TGA.     

Solanopubamine,a rare steroidal alkaloid from Solanum schimperianum: Synthesis of some new alkyl and acyl derivatives,their anticancer and antimicrobial evaluation

Solanopubamine (3β-amino-5α, 22αH, 25βH-solanidan-23β-ol), a steroidal alkaloid was isolated from the alkaloidal fraction of Solanum schimperianum in significant yield. Its structure was established by IR, positive ESI-MS, 1D and 2D NMR. The presence of -3β-NH₂ and -23β-OH groups was achieved through methylation, acetylation or coupling with octadecanoic and undec-11-enoic acids to produce six derivatives (2–7). Their structures were confirmed by spectroscopic analyses. Solanopubamine and semi-synthetic analogs are investigated for their in vitro cytotoxicity against a panel of human cancer cell lines and anti-microbial activity. Solanopubamine showed good antifungal activity only against Candida albicans and C. tenuis with MIC of 12.5 μg/mL. Semi-synthesized compounds (2–7) have failed to show anti-tumor and anti-microbial activities.     

A computational investigation of the electronic properties of Octahedral Al n N n and Al n P n cages (n = 12, 16, 28, 36, and 48)

Density functionla theory (DFT) calculations are performed to characterize geometric and electronic features of the octahedral Al _n N _n and Al _n P _n cages (n = 12, 16, 28, 32, and 48). Toward this aim, ¹⁵N, ²⁷Al, and ³¹P chemical shielding (CS) tensors as well as natural charge analyses are calculated for the optimized structures. CS parameters detect three distinct electronic environments for atoms within the Al _n N _n and Al _n P _n cages. The chemical shifts of N2 sites belonging to a hexagon and surrounded by three hexagons and a square obtained are different from those of N3 sites belonging to a hexagon that is surrounded only by hexagons—due to different curvatures exerted at the sites with different local structures. In addition, there is an increasing tendency in the Δσ values of the three local structures, Δσ (N1) > Δσ (N2) > Δσ (N3), N1 sites belonging to four-membered rings. The chemical shieldings of those Al and P sites belonging to a hexagon that is surrounded only by hexagons in the cages (360.7–366.7 and 496.5–514.7 ppm) are close to those previously reported for AlP nanotubes. Three distinct electrostatic environments around the N, Al, and P nuclei are also confirmed by the calculated natural charges. It should be noted that the positively charged Al atoms on the cages turn out to be the available sites for adsorption of H2 molecules.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.