Effects of pulsatile flow and straight length on low-density lipoprotein transport in a curved arterial wall

Abnormal accumulation of macromolecules such as low-density lipoproteins (LDLs) in the arterial wall causes narrowing and blockage of vessels, which leads to atherosclerosis. Effects of pulsatile nature of blood flows as well as the initial length on transport of the LDL species in the arterial boundary layer region are analyzed numerically in the present work. The set of governing equations consisting of continuity, Navier-Stokes, and species transport is solved using a projection method based on the second-order central difference discretization. The obtained results are in excellent agreement with the pertinent data. The computational results imply that the flow field and concentration distribution are time dependent but the variation of the filtration velocity can be ignored. The LDL concentration boundary layer thickness decreases in the outer part and increases in the inner part for both with or without straight length. Presence of initial straight length generates about 26% growth in the boundary layer thickness, although its effect on the LDL surface concentration (LSC) is negligible. The maximum LSC is related to the regions with minimum wall shear stress in the inner part of the curved artery, which have more potential for formation of atherosclerosis. A new numerical correlation between the LSC and boundary layer thickness is proposed and examined.     

Study on Preparation and Properties of Acrylonitrile‐Butadiene‐Styrene/Montmorillonite Nanocomposites

Acrylonitrile‐butadiene‐styrene (ABS)/organically modified montmorillonite nanocomposites were prepared by melt blending in an internal mixer, and their morphology, rheological behaviors and mechanical properties were characterized using X‐ray diffraction (XRD), capillary rheometer and tensile, flexural and impact tests. X‐ray diffraction studies revealed the presence of intercalated structure for the prepared nanocomposites and good dispersion of clay layers at low levels of its loading. From the rheological investigations it was observed that the prepared nanocomposites and their pristine counterpart have shear‐thinning behavior, obeying the power law equation. At low shear rates, the steady shear viscosity and shear stress of the nanocomposites increase with increasing of nanoclay content. However, at high shear rates they behave similar to pure ABS. It was shown that the flow activation energy (E) values increase with increasing of nanoclay content. Mechanical tests showed that the flexural moduli of the nanocomposites increase with increase of nanoclay loading, but the flexural strength and the tensile and impact properties decrease with increase of nanoclay content.     

Study on Steady Shear,Morphology and Mechanical Behavior of Nanocomposites based on Polyamide 6

Nanocomposites of two different grades of polyamide 6 (PA6) with organically modified nanoclay were prepared via melt compounding in a twin‐screw extruder. The rheological behavior, morphology and mechanical properties of the nanocomposites were studied using a capillary rheometer, x‐ray diffraction (XRD), tapping‐mode atomic force microscopy (AFM), and tensile and flexural tests. XRD patterns indicate that the organically modified layered silicate was well dispersed in the PA6 matrix. From the AFM images the surface roughness of PA6 slightly increases with addition of organoclay. The rheological studies showed that the prepared nanocomposites have shear thinning behavior, obeying the power law equation. Addition of organoclay increases the shear stress and shear viscosity. At high rate of shear deformation the viscosity of nanocomposites are comparable to those of the pure polyamides. The activation energy of flow decreases with increasing nanoclay content. For most of the prepared nanocomposites the activation energy values increase with increasing shear rate. The tensile strength and flexural modulus and strength of the nanocomposites increase with increase of nanoclay content, but the extension at yield decreases with increasing clay loading.     

High Pressure High Temperature Dynamic Rheometry of Sulfonated Polyacrylamide Solutions in Electrolyte Media as Used for Oil Recovery Applications

Sulfonated polyacrylamide (SPAA) solutions were prepared and the effects of pressure, polymer concentration, and water temperature, pH and salinity on their rheological behavior were investigated using a concentric cylinder dynamic rheometer equipped with a high pressure cell. According to the rheological flow curves the shear stress of SPAA solutions increased less than in proportion to their shear rates; that is, a shear thinning effect occurred. For polymer solutions containing 15,000 ppm of SPAA, shear viscosity, and stress were nearly insensitive to pressure. However, the shear viscosity and stress of SPAA solutions were affected by temperature and this effect was more evident at lower pressure. The flow curves indicated the shear viscosity and stress of the samples increased with increasing SPAA concentration and pH of the water, but were decreased with increasing water salinity and temperature.     

Gelation and Swelling Behavior of Semi-Interpenetrating Polymer Network Hydrogels Based on Polyacrylamide and Poly(vinyl alcohol)

Novel semi-Interpenetrating Polymer Network (semi-IPN) hydrogels based on partially Hydrolyzed Polyacrylamide (HPAM) and Poly(Vinyl Alcohol) (PVA) were prepared by solution crosslinking using chromium triacetate. Effects of PVA content on the gelation process and swelling behavior in tap water and different electrolyte solutions were investigated. Study of the gelation behavior using dynamic rheometery showed that the limiting storage modulus of the semi-IPN gels decreased with increasing PVA content. It was also found that increasing the PVA content increases the loss factor, indicating that the viscous properties of this gelling system increase more strongly than the elastic properties. The swelling ratio of the semi-IPN gels in tap water decreased as the concentration of the PVA increased. However, the semi-IPN gels showed lower salt sensitivity factor in synthetic oil reservoir water as compared with HPAM gels. Therefore, they are potentially good candidates for enhanced oil recovery applications.     

Heavy Vacuum Gas Oil Upregulates the Rhamnosyltransferases and Quorum Sensing Cascades of Rhamnolipids Biosynthesis in Pseudomonas sp. AK6U

We followed a comparative approach to investigate how heavy vacuum gas oil (HVGO) affects the expression of genes involved in biosurfactants biosynthesis and the composition of the rhamnolipid congeners in Pseudomonas sp. AK6U. HVGO stimulated biosurfactants production as indicated by the lower surface tension (26 mN/m) and higher yield (7.8 g/L) compared to a glucose culture (49.7 mN/m, 0.305 g/L). Quantitative real-time PCR showed that the biosurfactants production genes rhlA and rhlB were strongly upregulated in the HVGO culture during the early and late exponential growth phases. To the contrary, the rhamnose biosynthesis genes algC, rmlA and rmlC were downregulated in the HVGO culture. Genes of the quorum sensing systems which regulate biosurfactants biosynthesis exhibited a hierarchical expression profile. The lasI gene was strongly upregulated (20-fold) in the HVGO culture during the early log phase, whereas both rhlI and pqsE were upregulated during the late log phase. Rhamnolipid congener analysis using high-performance liquid chromatography-mass spectrometry revealed a much higher proportion (up to 69%) of the high-molecularweight homologue Rha–Rha–C₁₀–C₁₀ in the HVGO culture. The results shed light on the temporal and carbon source-mediated shifts in rhamonlipids’ composition and regulation of biosynthesis which can be potentially exploited to produce different rhamnolipid formulations tailored for specific applications.     

Exact and approximate solutions of Schrödinger’s equation for a class of trigonometric potentials

The asymptotic iteration method is used to find exact and approximate solutions of Schrödinger’s equation for a number of one-dimensional trigonometric potentials (sine-squared, double-cosine, tangent-squared, and complex cotangent). Analytic and approximate solutions are obtained by first using a coordinate transformation to reduce the Schrödinger equation to a second-order differential equation with an appropriate form. The asymptotic iteration method is also employed indirectly to obtain the terms in perturbation expansions, both for the energies and for the corresponding eigenfunctions.     

Stochastic thermal shock problem in generalized thermoelasticity

In this work, we consider the problem of a half space in the context of the theory of generalized thermoelasticity with one relaxation time. Realistically, the boundary conditions of the problem are considered to be stochastic. Laplace transform technique is used to solve the problem. The boundary conditions are considered to be of a type white noise. The inverse transforms are obtained in an approximate manner using asymptotic expansions valid for small values of time. Numerical results are given and represented graphically. Finally, a comparison with the ideal case when the boundary conditions are deterministic is carried out.     

Effect of operational parameters on degradation of Malachite Green by ultrasonic irradiation

The aim of the present study was to apply ultrasonic technique to remove Malachite Oxalate Green (MG) from aqueous solution. An ultrasonic bath with frequency of 35 kHz was used to investigate the effect of different operational parameters such as MG concentration, power density, temperature, mechanical agitation and addition of EtOH, 2-PrOH and iso-BuOH. Decolorization of MG follows a first order kinetics and hydroxyl radicals have an important role in degradation of MG. The apparent reaction rate constant (k(ap)) was influenced by variation of operational parameters. The activation energy was 30.95 kJ/mol in temperature range of 21-34 degrees C, suggesting a diffusion-controlled reaction. Alcohols act as hydroxyl radicals scavengers having undesirable contribution. UV-vis spectral change of MG showed hypsochromic shift occurred with increasing sonication time, proposing N-demethylation process of MG.     

New Thiophene Derivatives as Antimicrobial Agents

Phenacylbromide derivatives constitute a multilateral group of precursors for the synthesis of numerous heterocycles of organic compounds. Briefly, 5‐(2‐bromo‐acetyl)‐substituted‐thiophene derivative has been used as a synthon for synthesis of new thiophene‐containing compounds through the reaction with nucleophilic nitrogen compounds and thioamides. The suggested structures of the newly synthesized thiophene compounds were confirmed and assured with different spectroscopic tools and with CHN elemental analysis. Additionally, the antimicrobial activity of these thiophene compounds was recorded to investigate their potency against various types of bacteria and fungi. Results showed that these compounds exhibit significant inhibitory activity against the growth of tested bacterial and fungal strains and that some derivatives were more potent than the employed reference drugs.