Intermittency of energy in rapid granular shear flows

Hard-disk simulations are used for two-dimensional rapid granular shear flows of circular disks between two rotating cylinders. The intermittency effects associated with the rate of the energy dissipation of collisions are studied. The statistics of intermittent signals of energy dissipation reveals that a power law governs the dynamics of rapid shear granular flows. A dynamical system approach based on the Gledzer-Ohkitani-Yamada shell model of turbulence is employed to reproduce signals for energy dissipation that are statistically consistent with those from simulations. The results suggest that rapid granular flows can be analyzed by appropriate turbulent models.     

Coupled-mode theory of the Raman effect in silicon-on-insulator waveguides

Coupled-mode theory is used to calculate Raman gain and spontaneous efficiency in silicon waveguides with cross-sectional areas ranging from 0.16 to 16 microm2. We find a monotonic increase in the Raman gain as the waveguide cross section decreases for the range of dimensions considered. It is also found that mode coupling between the Stokes modes is insignificant, and thus polarization multiplexing is possible. The results also demonstrate that for submicrometer waveguide dimensions the Einstein relation between spontaneous efficiency and stimulated gain no longer holds.     

Regular wave propagation out of noise in chemical active media

A pacemaker, regularly emitting chemical waves, is created out of noise when an excitable photosensitive Belousov-Zhabotinsky medium, strictly unable to autonomously initiate autowaves, is forced with a spatiotemporal patterned random illumination. These experimental observations are also reproduced numerically by using a set of reaction-diffusion equations for an activator-inhibitor model, and further analytically interpreted in terms of genuine coupling effects arising from parametric fluctuations. Within the same framework we also address situations of noise-sustained propagation in subexcitable media.     

Seeded supercontinuum generation with optical parametric down-conversion

The transition between modulation instability gain and induced soliton fission in nonlinear fiber is experimentally investigated by coherent seeding with the two-color output of an optical parametric oscillator. This approach produces supercontinuum spectra displaying persistent, fine modulation from seeding-induced noise reduction. Numerical simulations support the findings.     

Formation of negative oxidation states of platinum and gold in redox ionic liquid: Electrochemical evidence

The electrochemical reduction of noble metal electrodes in the presence of redox ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [FcEMIM][TFSI], was investigated by cyclic voltammetry. Our experiments suggest the formation of metal with negative oxidation states, in the cases of platinum and gold electrodes [M_n⁻, FcEMIM⁺]. By analogy with the previous work, the formation of these phases is concomitant with the insertion of the supporting electrolyte; which correspond in our experimental condition to the redox cation of the ionic liquid. As an exciting result, the electrochemical investigations of the reduced electrode in electrolytic solution, containing solvent and supporting electrolyte, evidence the presence of the ferrocene groups at the electrode surface. Moreover, the reduced electrode exhibits the presence of the ferrocene even after, contact with air, after ultrasound, and after physical polishing, highlighting the large stability of this organo-metallic phases formed in this media. The AFM investigations demonstrate the morphological change of the platinum surface after the reduction process. Finally, our works bring a formal electrochemical proof of the presence of the ionic liquid cation inside the electrode material after the cathodic treatment in this media.     

Use of headspace solid-phase microextraction for the quantification of poly(3-hydroxybutyrate) in microbial cells

Biopolymers such as poly(hydroxyalkanoates) (PHAs) have received much attention due to their physico-chemical properties, biodegradability, and biocompatibility that make them good candidates for industrial and medical applications. Produced by some microorganisms PHAs accumulate within the cells of these organisms. The optimization of microbial processes to produce PHAs at a lower cost requires rapid and accurate techniques for quantification of the biopolymer in biomass. The present study describes a method based on solid-phase microextraction (SPME) coupled to gas chromatography (GC) for the determination of poly(3-hydroxybutyrate) (PHB) in Alcaligenes latus cells. First PHB was depolymerized by either methanolic or hydrolytic digestion into methyl 3-hydroxybutyrate (Me-3-HB) or crotonic acid (CA), respectively. The resulting analytes were then subjected to analysis by headspace SPME/GC with flame ionization detection (FID). The two depolymerization/SPME/GC-FID methods were optimized and applied to the analysis of PHB in bacterial biomass harvested from a fermentation process that uses A. latus. Results were compared with those obtained using GC-FID analysis of MeOH/CHCl(3) digested samples. Excellent agreement was found between the three methods but the two SPME-based methods were environmentally friendly and easier to perform.     

Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.     

Grignard-Addition an Pyridin-N-oxid

Addition of phenyl-, alkyl-, alkenyl- and alkinyl-Grignard reagents to pyridine-N-oxide in THF leads to 5-substituted (2Z, 4E)-pentadien-aldoximes 6 having (E) (syn)-configuration of the C, N-double bond. The unsaturated oximes are shown to arise through an electrocyclic ring opening reaction from the primary Grignard adducts 5 . These can be trapped by protonation at low temperature.     

Simultaneous voltammetric sensing of acetaminophen,epinephrine and melatonin using a carbon paste electrode modified with zinc ferrite nanoparticles

A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄ NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L^?1 for AC, 5–100 (0.7) μmol L^?1 for EP, and 6.5–145 (3) μmol L^?1 for MT.

Open image in new window

Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated