CuO-CeO2 nanocomposite：A highly efficient recyclable catalyst for the multicomponent synthesis of 4H-benzo[b]pyran derivatives

CuO–CeO2 is reported as a highly efficient and green recyclable catalyst,for the multicomponent synthesis of 4H-benzo[b]pyran derivatives.The catalyst was synthesized by a co-precipitation method and characterized by XRD,BET specific surface area,ESEM and EDS analysis.This synthetic method provides several advantages such as simple work-up procedures,minimal amount of waste generated,short reaction time,and high yields of products.     

Synthesis and fabrication of (1 − x)ZnAl2O4–xSiO2 thin films to be applied as patch antennas

Zinc aluminate compounds have been dispersed in silica matrix prepared by sol-gel method with different compositions for (1 ? x)ZnAl₂O₄–xSiO₂. Continuous stirring of ethylene glycol solution contained zinc nitrate, aluminium nitrate and silicon dioxide to produces gel precursor. Structural and morphological studies of (1 ? x)ZnAl₂O₄–xSiO₂ thin films were examined by field emission scanning electron microscopy (FESEM) and X-ray diffractometer (XRD) analysis. The FESEM images showed the spherical structures with porosity for (1 ? x)ZnAl₂O₄–xSiO₂ thin films. XRD analysis indicated that the crystallite size for (1 ? x)ZnAl₂O₄–xSiO₂ increased from 39.79 to 44.34 nm. Fourier transform infra-red analysis showed that the existence of H₂O molecules and the presence of nitrate group within the samples. Dielectric permittivity (ε _r ) of (1 ? x)ZnAl₂O₄–xSiO₂ samples were measured within frequency range from 1 Hz to 1 MHz. The dielectric permittivity, ε _r decreased as frequency was applied to the sample. The performance of the patch antenna can be measured using return loss analysis. The highest result shows that the patch antenna resonated at frequency 3.46 GHz and gives ?14.25 dB return loss bandwidth.     

Investigating Localized Electrochemical of Ferrocenyl-Imidazolium in Ionic Liquid Using Scanning Electrochemical Microscopy Configuration

In the present work, the localized electrochemical behavior of redox molecule in ionic liquid has been investigated using scanning electrochemical microscopy. The electrochemical response of ferrocenyl-imidazolium redox mediator was studied by recording approach curves over a conducting and insulating substrate in an undiluted ionic liquid. The SECM approach curve over the conducting substrate displays a positive feedback, as observed in classical solvent. However, in the case of the insulating substrate, the approach curve reveals different shapes, depending on the used approach speed. In this configuration, low approach speed is necessary to reach the expected negative feedback. Interestingly, at a very close distance between the UME and the insulating substrate, a thin film behavior is revealed. In addition, the approach curves on both insulator and conducting substrates can be reconstructed from punctual responses at different distance tip-substrate. The latter match perfectly with the expected theoretical curves over conducting and insulating under diffusion control.     

Design,Synthesis, Crystal Structure,In Vitro and In Silico Evaluation of New N′-Benzylidene-4-tert-butylbenzohydrazide Derivatives as Potent Urease Inhibitors

Background: Hydrazides play a vital role in making biologically active compounds in various fields of chemistry. These determine antioxidant, antidepressant, antimalarial, anti-inflammatory, antiglycating, and antimicrobial activity. In the present study, twenty-three new N′ benzylidene-4-(tert-butyl)benzohydrazide derivatives (4–26) were synthesized by the condensation of aromatic aldehydes and commercially available 4-(tert-butyl)benzoic acid. All the target compounds were successfully synthesized from good to excellent yield; all synthesized derivatives were characterized via spectroscopic techniques such as HREI-MS and ¹H-NMR. Synthesized compounds were evaluated for in vitro urease inhibition. All synthesized derivatives demonstrated good inhibitory activities in the range of IC₅₀ = 13.33 ± 0.58–251.74 ± 6.82 µM as compared with standard thiourea having IC₅₀ = 21.14 ± 0.425 µM. Two compounds, 6 and 25, were found to be more active than standard. SAR revealed that electron donating groups in phenyl ring have more influence on enzyme inhibition. However, to gain insight into the participation of different substituents in synthesized derivatives on the binding interactions with urease enzyme, in silico (computer simulation) molecular modeling analysis was carried out.     

Controlling the mechanical properties of poly(L‐lactide– ε‐caprolactone) monofilament sutures by an acetone/water treatment

For monofilament biodegradable sutures fabricated from the L ‐lactide–ε‐caprolactone (75/25) copolymer [P(LLA/CL)], there have been some concerns regarding their mechanical properties, such as the knot‐pull strength and stiffness. This article demonstrates the further potentiality of these sutures through improvements in those properties. With the aim of diminishing the molecular orientation, particularly in the suture surface region, we adopted an expedient method to treat P(LLA/CL) sutures with an acetone/water mixture, using different times and time patterns. The changes in the molecular orientation distributions across the suture cross sections were characterized by the specific index of birefringence measured with an interference microscope. The crystal orientations, knot‐pull strengths, tensile strengths, and bending rigidity were measured. The conformational changes in suture breaking during knot‐pull tests were analyzed with high‐speed‐video observations. Morphological analyses of the fractural surfaces were performed with scanning electron microscopy. The knot‐pull strength tended to rise, in comparison with that of untreated samples, up to a certain treatment time and was accompanied by a minimal decrement of the tensile strength. The knot‐pull strength did not show an increasing trend with further treatment, whereas the tensile strength declined remarkably. The birefringence, crystal orientation, bending rigidity, fractured surface analysis, and high‐speed‐video observations revealed molecular disorientation mainly in the filament outer layers for that particular treatment causing the sutures to be considerably softer. The suture softness played a role in changing the deformation behavior of the knot when a load was applied and caused the knot‐pull strength to rise. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2449–2462, 2002     

Synthesis and conformational analysis of a cyclic peptide obtained via i to i+4 intramolecular side-chain to side-chain azide-alkyne 1,3-dipolar cycloaddition

Intramolecular side-chain to side-chain cyclization is an established approach to achieve stabilization of specific conformations and a recognized strategy to improve resistance toward proteolytic degradation. To this end, cyclizations, which are bioisosteric to the lactam-type side-chain to side-chain modification and do not require orthogonal protection schemes, are of great interest. Herein, we report the employment of Cu(I)-catalyzed 1,3-dipolar cycloaddition of side chains modified with azido and alkynyl functions and explore alternative synthetic routes to efficiently generate 1,4-disubstituted [1,2,3]triazolyl-containing cyclopeptides. The solid-phase assembly of the linear precursor including epsilon-azido norleucine and the propargylglycine (Pra) in positions i and i+4, respectively, was accomplished by either subjecting the resin-bound peptide to selective on-resin diazo transformation of a Lys into the Nle(epsilon-N3) or the incorporation of Fmoc-Nle(epsilon-N3)-OH during the stepwise build-up of the resin-bound peptide 1b. Solution-phase Cu(I)-catalyzed 1,3-dipolar cycloaddition converts the linear precursor Ac-Lys-Gly-Nle(epsilon-N3)-Ser-Ile-Gln-Pra-Leu-Arg-NH2 (2) into the 1,4-disubstituted [1,2,3]triazolyl-containing cyclopeptide [Ac-Lys-Gly-Xaa(&(1))-Ser-Ile-Gln-Yaa(&(2))-Leu-Arg-NH2][(&(1)(CH2)4-1,4-[1,2,3]triazolyl-CH2&(2))] (3). The conformational preferences of the model cyclopeptide 3 (III), which is derived from the sequence of a highly helical and potent i to i+4 side-chain to side-chain lactam-containing antagonist of parathyroid hormone-related peptide (PTHrP), are compared to the corresponding lactam analogue Ac[Lys(13)(&(1)),Asp(17)(&(2))]hPTHrP(11-19)NH2 (II). CD and NMR studies of 3 and II in water/hexafluoroacetone (HFA) (50:50, v/v) revealed a high prevalence of turn-helical structures involving in particular the cyclic regions of the molecule. Despite a slight difference of the backbone arrangement, the side-chains of Ser, Gln, and Ile located at the i+1 to i+3 of the ring-forming sequences share the same spatial orientation. Both cyclopeptides differ regarding the location of the turn-helical segment, which in II involves noncyclized residues while in 3 it overlaps with residues involved in the cyclic structure. Therefore, the synthetic accessibility and conformational similarity of i to i+4 side-chain to side-chain cyclopeptide containing the 1,4-disubstituted [1,2,3]triazolyl moiety to the lactam-type one may result in similar bioactivities.     

Basic Ionic Liquid as Catalyst and Reaction Media for the One‐pot Three‐component Regioselective Synthesis of Various Thiazol‐2‐imine Derivatives

Thiazol‐2‐imine derivatives were synthesized in an easy and efficient route from the regioselective one‐pot three‐component reaction of aryl amine, alkylisothiocyanate, and various α‐haloketones in [omim][OH] basic ionic liquid. Recyclable reaction media, catalyst free, and short reaction times are the main advantages of this protocol. This method produces the products at room temperature in excellent yields (68–96%). Furthermore, the target compound 6b was determined by X‐ray crystallographic analysis.     

A Comprehensive Review on <Emphasis Type="SmallCaps">l</Emphasis>-Asparaginase and Its Applications

l-asparaginase (LA) catalyzes the degradation of asparagine, an essential amino acid for leukemic cells, into ammonia and aspartate. Owing to its ability to inhibit protein biosynthesis in lymphoblasts, LA is used to treat acute lymphoblastic leukemia (ALL). Different isozymes of this enzyme have been isolated from a wide range of organisms, including plants and terrestrial and marine microorganisms. Pieces of information about the three-dimensional structure of l-asparaginase from Escherichia coli and Erwinia sp. have identified residues that are essential for catalytic activity. This review catalogues the major sources of l-asparaginase, the methods of its production through the solid state (SSF) and submerged (SmF) fermentation, purification, and characterization as well as its biological roles. In the same breath, this article explores both the past and present applications of this important enzyme and discusses its future prospects.