示波器观测动态磁滞回线实验中曲线描绘浅析

给出了示波器观测铁磁材料物质磁滞回线的基本原理,针对实验中常见的错误,介绍了如何选取合理的数据并快速描绘磁滞回线的技巧。     

Effect of trabecular bone material properties on ultrasonic backscattering signals

In this study, ultrasonic backscattering signals in cancellous bones were obtained by finite difference time domain （FDTD） simulations, and the effect of trabecular material properties on these signals was analyzed. The backscatter coefficient （BSC） and integrated backscatter coefficient （IBC） were numerically investigated for varying trabecular bone material properties, including density, Lame coefficients, viscosities, and resistance coefficients. The results show that the BSC is a complex function of trabecular bone density, and the IBC increases as density increases. The BSC and IBC increase with the first and second Lame coefficients. While not very sensitive to the second viscosity of the trabeculae, the BSC and IBC decrease as the first viscosity and resistance coefficients increase. The results demonstrate that, in addition to bone mineral density （BMD） and microarchitecture, trabecular material properties significantly influence ultrasonic backseattering signals in cancellous bones. This research furthers the understanding of ultrasonic backscattering in cancellous bones and the characterization of cancellous bone status.     

Coupled-channel analysis for 20.4 MeV energy of p-<Superscript>64</Superscript>Zn inelastic scattering

In this study, a coupled-channel (CC) analysis of the elastic and the inelastic scattering of 20.4 MeV polarized protons from a ⁶⁴Zn target leading to the deformed 2⁺, 3−, 2₂⁺2_2^+ states was performed. The CC potential parameters and the deformation parameters of the excited states corresponding to the best fit to the experimental differential cross-sections and the analysing powers data were determined. For 2₂⁺2_2^+ excited state, a mixed type was used and a good fit to the data was provided. The CC calculation results were compared to the pure distorted wave Born approximation (DWBA) calculation results which were calculated using the new parameters. All calculations were conducted using the computer code ECIS06.     

镁掺杂氧化铈整体式催化剂催化CO2和CH3OH直接合成碳酸二甲酯

采用共沉淀法成功地合成了不同Mg掺杂量的Ce_1-xMg_xO₂(x=0.05、0.10、0.15、0.20)固溶体催化材料,并运用透射电子显微镜(TEM)、X射线衍射(XRD)、氮气吸附-脱附测试、拉曼光谱、X射线光电子能谱(XPS)、CO₂程序升温脱附(CO₂-TPD)等技术对这些材料进行了表征。结果发现,通过调控CeO₂晶格中Mg的含量,可以调控所制备的Ce_1-xMg_xO₂催化材料的粒径、比表面积、表面缺陷等。其中Ce_0.90Mg_0.10O₂展现了最佳的表面性质,具有最小的平均粒径(约5.8 nm),最大的比表面积(约136 m2·g^-1)以及最高的表面氧含量(31.98%)。将Ce_1-xMg_xO₂催化材料涂覆在堇青石蜂窝陶瓷上制成整体催化剂,考察其对CO₂和CH₃OH直接合成碳酸二甲酯的催化性能。在140℃、2.4 MPa、反应2 h的条件下,Ce_0.90Mg_0.10O₂整体催化剂上碳酸二甲酯的收率高达20.21%,催化效果明显优于CeO₂和其余的Ce_1-xMg_xO₂(x=0.05、0.15、0.20)催化材料。     

基频估计算法研究平均骨小梁间距

超声背散射信号能提供松质骨微结构信息从而能有效的诊断骨质疏松,而平均骨小梁间距(MTBS)是表征松质骨微结构的重要参数之一。本文提出了一种基频估计的MTBS估计算法,对仿真信号和离体牛胫骨松质骨中的超声背散射信号分别进行分析处理,并和现有的两种算法(简易反向滤波跟踪(SIFT)算法和AR倒谱法)进行比较。实验结果表明基频估计算法对噪声和随机散射回波有更好的鲁棒性,在信噪比较低和随机散射回波幅度较大时估计值更加精确,且有很好的方差性能。充分说明了本文算法是一种有效的MTBS估计算法。     

The Picard Theorem on S-metric spaces

Recently, the notion of an S-metric space is defined and extensively studied as a generalization of a metric space. In this paper, we define the notion of the S∞-space and prove its completeness. We obtain a new generalization of the classical "Picard Theorem".     

吡咯亚胺配体与过渡金属的反应性及其催化烯烃聚合

在经典的Brookhart吡啶双亚胺后过渡金属烯烃聚合催化剂基础上,用吡咯五元环代替吡啶六元环骨架可得到具有不同电子效应的新型吡咯亚胺配体.通过吡咯环特殊的电子效应和位阻效应可设计出种类繁多的有别于吡啶亚胺配体的配合物.综述了吡咯亚胺配体与前过渡金属(Ti,Zr等)、后过渡金属(Fe,Co,Ni,Pd等)、稀土金属(Y...     

Detection of long bones based on Barker code excited ultrasonic guided waves

Single pulse excited ultrasonic guided wave surfers high attenuation during the propagation in long bones.This results in small amplitude and low signal-to-noise ratio(SNR)of measured signals.Thus,the Barker code excitation is introduced into long bone detection to improve the quality of received signals,due to its efficiency in increasing amplitude and SNR.Both simulation and in vitro experiment were performed,and the results were decoded by the weighted match filter(WMF) and the finite impulse response- least squares inverse filter(FIRLSIF),respectively.The comparison between the results of Barker code excitation and sine pulse excitation was presented.For 13-bit Barker code excitation,WMF produced 13 times larger amplitude than sine pulse excitation,while FIR-LSIF achieved higher peak-sidelobe-level(PSL) of —63.59 dB and better performance in noise suppression.The results show that the Barker code excited guided waves have the potential to be applied to the long bone detection.     

Study on the mean trabecular bone spacing based on fundamental frequency estimation method

Ultrasonic backscatter signals from the cancellous bone can be used to diagnose osteoporosis effectively due to its ability to provide the information of bone microstructure. Mean trabecular bone spacing(MTBS)is one of the important parameters for characterization of bone microstructure.This paper proposed a MTBS estimating method based on the fundamental frequency estimation,which was applied to backscatter signals from simulations, and in vitro bovine trabeculae.The estimated MTBS were compared with those of simplified inverse filter tracking(SIFT)algorithm and autoregressive(AR)cepstrum method.The results demonstrated that the proposed method is very robust for the MTBS estimation with more precise estimates and smaller estimated variance in the presence of a small signal-to-noise ratio (SNR),and a large scattering strength ratio of diffuse scatterers to regular ones.